UT502A Insulation Resistance Tester
Out of stock
1. 2000 count LCD display, overload indication, backlight
₨24,852 ₨30,793
Out of stock
CompareWeight | 0.5 kg |
---|---|
Dimensions | 15 × 10 × 7 cm |
Specifications | Range | UT502A | |
Insulation resistance (Ω) | Test voltages | 500V/1000V/2500V | 0%~10% |
500V | 0MΩ~99.9MΩ | ±(3%+5) | |
100MΩ~5GΩ | ±(5%+5) | ||
1000V | 0MΩ~99.9MΩ | ±(3%+5) | |
100MΩ~5GΩ | ±(5%+5) | ||
2500V | 0MΩ~99.9MΩ | ±(3%+5) | |
100MΩ~9.9GΩ | ±(5%+5) | ||
10GΩ~20GΩ | ±(10%+5) | ||
Load current | 50V (R=50kΩ) 1mA | 0%~10% | |
100V (R=100kΩ) 1mA | 0%~10% | ||
250V (R=250kΩ) 1mA | 0%~10% | ||
500V (R=500kΩ) 1mA | 0%~10% | ||
1000V (R=1MΩ) 1mA | 0%~10% | ||
2500V (R=1MΩ) 1mA | 0%~10% | ||
Short-circuit current | <2mA | ||
Low resistance (Ω) | 0.01Ω~200Ω (about 5.0V/>200mA) | ±(2%+3) | |
AC voltage (V) | 30V~600V | ±(2%+3) | |
Features | |||
Display count | 2000 | ||
DAR | 60s/15s and 60s/30s | √ | |
PI | √ | ||
Auto range/Low battery indication | √ | ||
LCD backlight/Light alarm | √ | ||
Buzzer alarm/High voltage indication | √ | ||
Over load indication/Auto discharge | √ | ||
Test voltage secondary display | √ | ||
10MΩ internal resistance test | √ | ||
Meets IEC 61557 | 61557-1:2007; 61557-2:2007; 61557-4:2007 | ||
General Characterisitics | |||
Power | 1.5V battery (LR6) x 6 | ||
Display | 70.6mm x 34mm | ||
Product color | Red and grey | ||
Product net weight | 500g | ||
Product size | 150mm x 100mm x 71mm | ||
Standard accessories | Batteries, test leads, alligator clips, gallus, test probes | ||
Standard individual packing | Gift box, carrying bag, English manual | ||
Standard quantity per carton | 20pcs | ||
Standard carton measurement | 500mm x 380mm x 330mm (0.063 CBM per standard carton) | ||
Standard carton gross weight | 18.9kg |
Based on 0 reviews
Be the first to review “UT502A Insulation Resistance Tester”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Insulation Tester
DIGITAL INSULATION / CONTINUITY TESTER MODEL 3005A
• Bargraph to display insulation resistance.
• Displays the value of external AC voltage along with flashing symbol.
• Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
• Live circuit warning beeper.
• Releasing the test button automatically discharges the charges stored in the circuit under test.
• 200mA continuity measuring current to IEC 61557.
• Minimum 1mA current on insulation tests to IEC 61557.SKU: n/a -
Insulation Tester
DIGITAL INSULATION / CONTINUITY TESTER MODEL 3007A
• Bargraph to display insulation resistance.
• Displays the value of external AC voltage along with flashing symbol.
• Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
• Trac-Lok mode to conserve battery life on insulation and continuity tests.
• Live circuit warning beeper.
• Releasing the test button automatically discharges the charges stored in the circuit under test.
• Backlight function to view the test results in dimly lit areas.
• 200mA continuity measuring current to IEC 61557.
• Minimum 1mA current on insulation tests to IEC 61557.SKU: n/a -
Laser Distance Meters
UT395C Professional Laser Distance Meter
UT395 series are professional laser distance meters with color LCD display, electronic multi-axis leveler and other special features. Its unique operating system, friendly user interface, and personalized settings option all make these devices the perfect choice for professional distance measurement.
SKU: UN39C5T -
Insulation Tester
HIGH VOLTAGE INSULATION TESTER KEW 3125A
• Insulation Resistance up to 1TΩ
• Short-Circuit Current up to 1.5mA
• Wide Test Voltage from 250V to 5000V
• Diagnosis Function of PI and DAR
• Newly-designed alligator clip
• It comes with a tough hard case
• Filter function reduces noise interference for obtaining stable measurement
• Large display with Bar Graph indication and backlight
• Live voltage warning
• Safety standard IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a
There are no reviews yet.