Product Features
1. Analogue bar graph
2. Diode test and buzzer continuity
3. Transistor measurement
4. Auto range
5. MAX/MIN/REL measurement mode
10 in stock
Product Features
1. Analogue bar graph
2. Diode test and buzzer continuity
3. Transistor measurement
4. Auto range
5. MAX/MIN/REL measurement mode
₨5,922 ₨6,581
10 in stock
CompareProduct Features
1. Analogue bar graph
2. Diode test and buzzer continuity
3. Transistor measurement
4. Auto range
5. MAX/MIN/REL measurement mode
Weight | 0.4 kg |
---|---|
Dimensions | 18 × 8 × 4 cm |
Specifications | Range | Best Accuracy |
Model | UT60C | |
DC Voltage (V) | 400mV/4V/40V/400V/1000V | ±(0.8%+1) |
AC Voltage (V) | 4V/40V/400V/750V | ±(1%+5) |
Communication Bandwidth | 40Hz~400Hz | √ |
DC Current (A) | 400mA/4000mA/40mA/400mA/4A/10A | ±(1%+2) |
AC Current (A) | 400mA/4000mA/40mA/400mA/4A/10A | ±(1.5%+5) |
Resistance (Ω) | 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ | ±(1%+2) |
Capacitance (F) | 40nF/400nF/4μF/40μF/100μF | ±(3%+5) |
Frequency (Hz) | 10Hz~10MHz | ±(0.1%+3) |
Duty Cycle | 0.1%~99.9% | √ |
Temperature (°C) | -40℃~1000℃ | ±(1%+3) |
Features | ||
Fused 10A Range | Ceramic fuse | √ |
Relative Mode | √ | |
Full Icon Display | √ | |
Diode | √ | |
Continuity Buzzer | √ | |
Low Battery Display | √ | |
Input Impedance for DC Voltage Measurement | 10MΩ | √ |
Data Hold | √ | |
Auto Ranging | √ | |
Auto/Manual Range | √ | |
Display Backlight | √ | |
Max Display | 3999 | √ |
Auto Power Off | √ | |
General Characteristic | ||
Power | 9V Battery (6F22) | |
LCD Size | 63mm×31mm | |
Product Colour | Red and Grey | |
Product Net Weight | 340g | |
Product Size | 177mm×85mm×40mm | |
Standard Accessories | Test Lead, Battery, Test Clip, RS232C Interface Cable,PC Software CD | |
Standard Individual Packing | Gift Box,English Manual | |
Standard Quantity Per Carton | 40 pcs | |
Standard Carton Measurement | 595mm x 400mm x 326mm (0.078 CBM Per Standard Carton) | |
Standard Carton Gross Weight | 21Kg | |
Optional Accessories* | Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2) |
SPECIFICATIONS:
– Maximum display: 1999
– Method indication: LCD
– Maximum arm span: 60mm
– Operating temperature range:
work: 0C – 40C
Storage:-10C – 60C
– Power supply: 9V battery
– Low battery indication: YES, graphic symbol
– Audible indication: YES, piezoelectric transducer
– Dimensions: 270x100x45 mm
– Weight: about 610g (with battery)
Features
– Measuring voltage: 0-1000V 2 range
– Measurement of AC voltage: 0-700V in 1 range
– Measurement of alternating current: 200A-2000A in 2 ranges
– Measuring current: 200A-2000A in 2 ranges
– Measurement of resistance: 2k in 1 range
– Measuring capacity: NO
– Frequency: NO
– Temperature measurement: NO
– Testing LEDs: YES
– Acoustic continuity tester: YES
– Distance between arms: 6cm
– Meter dimensions: 270x100x45 mm
– Weight: 610g with battery
– Basic accuracy: ± (0.5% +2 digits)
1 × Clamp-On Meter BM-2000B
Standard accessory
Main unit 1set
Soldering iron handle (include iron tips and heater) 1pc
Iron holder 1pc
Clean sponge 1pc
Manual 1pc
Application Scope
UT 230 series is a handheld intelligent power clamp meter, which combines with digital current meter and power meter. It is equipped with powerful measurement and data processing software, which can help complete measurements, calculations and displays of voltage, current, active power, power factor, phase angle, apparent power, reactive power, power, frequency, temperature and other parameters.
This is solder paste for soldering small SMD components in a reflow oven or with a hot air soldering station. comes in a small container for prototyping or repairing job.This pack is the right amount of solder paste for most hobby projects. This paste is the replacement for solder wire used in Through-hole soldering, some times solder flux is referred to as solder paste.
There are no reviews yet.