Product Features
1. Analogue bar graph
2. Diode test and buzzer continuity
3. Transistor measurement
4. Auto range
5. MAX/MIN/REL measurement mode
10 in stock
Product Features
1. Analogue bar graph
2. Diode test and buzzer continuity
3. Transistor measurement
4. Auto range
5. MAX/MIN/REL measurement mode
₨5,922 ₨6,581
10 in stock
CompareProduct Features
1. Analogue bar graph
2. Diode test and buzzer continuity
3. Transistor measurement
4. Auto range
5. MAX/MIN/REL measurement mode
Weight | 0.4 kg |
---|---|
Dimensions | 18 × 8 × 4 cm |
Specifications | Range | Best Accuracy |
Model | UT60C | |
DC Voltage (V) | 400mV/4V/40V/400V/1000V | ±(0.8%+1) |
AC Voltage (V) | 4V/40V/400V/750V | ±(1%+5) |
Communication Bandwidth | 40Hz~400Hz | √ |
DC Current (A) | 400mA/4000mA/40mA/400mA/4A/10A | ±(1%+2) |
AC Current (A) | 400mA/4000mA/40mA/400mA/4A/10A | ±(1.5%+5) |
Resistance (Ω) | 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ | ±(1%+2) |
Capacitance (F) | 40nF/400nF/4μF/40μF/100μF | ±(3%+5) |
Frequency (Hz) | 10Hz~10MHz | ±(0.1%+3) |
Duty Cycle | 0.1%~99.9% | √ |
Temperature (°C) | -40℃~1000℃ | ±(1%+3) |
Features | ||
Fused 10A Range | Ceramic fuse | √ |
Relative Mode | √ | |
Full Icon Display | √ | |
Diode | √ | |
Continuity Buzzer | √ | |
Low Battery Display | √ | |
Input Impedance for DC Voltage Measurement | 10MΩ | √ |
Data Hold | √ | |
Auto Ranging | √ | |
Auto/Manual Range | √ | |
Display Backlight | √ | |
Max Display | 3999 | √ |
Auto Power Off | √ | |
General Characteristic | ||
Power | 9V Battery (6F22) | |
LCD Size | 63mm×31mm | |
Product Colour | Red and Grey | |
Product Net Weight | 340g | |
Product Size | 177mm×85mm×40mm | |
Standard Accessories | Test Lead, Battery, Test Clip, RS232C Interface Cable,PC Software CD | |
Standard Individual Packing | Gift Box,English Manual | |
Standard Quantity Per Carton | 40 pcs | |
Standard Carton Measurement | 595mm x 400mm x 326mm (0.078 CBM Per Standard Carton) | |
Standard Carton Gross Weight | 21Kg | |
Optional Accessories* | Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2) |
Features:
Model | UT3513 |
Resistance range | 20m Q/200m Q/2Q/20Q /200 Q/2kQ/20kQ |
Resolution | 1 u Q/10 u Q/100 u Q/lmO/lOmQ/lOOmQ/1 Q/10Q/100Q |
Test current | 1A/1A/100mA/10mA/1mA/1mA/100 uA/10 u A/l uA |
Testing terminal opencircuit voltage | <1V/<1V/<1V/<1V/<5V/<5V/<5V/<5V/<3V/ |
Measured parameter | DC resistance |
Basic accuracy | Slow: 0. 1%; Medium: 0. 2% |
Maximum reading | 22000 |
Range mode | Auto/Manual/nominal |
Calibration | Short-circuit full range zeroing |
Sorting function | 3types of resistance and voltage input: exceeds upper limit/exceeds lower limit/within the range,2 types of sorting result output: PASS/FAIL |
Comparing method | Absolute tolerance, percentage tolerance, direct-reading comparison |
Trigger mode | Internal, external |
Test terminal | Four-terminal measurement |
Button functions | Lock 一一 keyboard lock, OK 一一 screenshot |
System setup | Language: Chinese/English, key tone setting |
Interfaces & protocols | Handler interface, RS232, USB DEVICE and USB HOST communication interface,SCPI and Modbus protocol |
Upper computer software | V |
Power | AC 100~240V 50/60Hz |
Display | 4.3-inches LCD |
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.
This model has compact design with all metal construction.
1.This unit now features a Dual LED display with highly accurate LED digital readout.
2.Maximum output is 30V at 10A.
5.Over loading and current protection.
There are no reviews yet.