UT612 LCR Meters
9 in stock
UT610 series is a handheld LCR digitalelectric bridge meter with stable performance, safety, reliability and autorange. It is professional to measure inductance, capacitance and resistance. Ithas the features of low power dissipation, high accuracy and fast speed. It canselect the series-parallel measurement mode; measure the quality factor ofcomponents, the loss, the phase angle, equivalent resistance and DC resistance.It can provide up to 5 kinds of frequency under the inductance, capacitance andresistance mode to satisfy the actual requirement.
It is applicable to measuring and filtratingthe inductance, capacitance and resistance of lab, production line, maintenancepoint and teaching. It is the ideal tool of maintaining for many users.
₨39,600 ₨45,177
9 in stock
CompareUT610 series is a handheld LCR digitalelectric bridge meter with stable performance, safety, reliability and autorange. It is professional to measure inductance, capacitance and resistance. Ithas the features of low power dissipation, high accuracy and fast speed. It canselect the series-parallel measurement mode; measure the quality factor ofcomponents, the loss, the phase angle, equivalent resistance and DC resistance.It can provide up to 5 kinds of frequency under the inductance, capacitance andresistance mode to satisfy the actual requirement.
It is applicable to measuring and filtratingthe inductance, capacitance and resistance of lab, production line, maintenancepoint and teaching. It is the ideal tool of maintaining for many users.
| Weight | 0.4 kg |
|---|---|
| Dimensions | 10 × 19 × 5 cm |
| Specification | Range | Best Accuracy |
| Model | UT612 | |
| Inductance (H) | 20uH～2000H | ±(0.5%+5) |
| Capacitance (F) | 200pF～20mF | ±(0.5%+5) |
| Resistance (Ω) | 20Ω～200MΩ | ±(0.3%+5) |
| Test Frequency (Hz) | 100Hz/120Hz/1KHz/10KHz/100KHz | √ |
| Operational Voltage | 0.6Vrms | √ |
| Test Parameters | L/C/R/DCR/Q/D/θ/ESR | √ |
| Features | ||
| Display Count | 20000 | |
| D/Q Display Count | 2000 | |
| D/Q Resolution | 0.001 | √ |
| Auto Range | √ | |
| Real-Time Display Test Frequency | √ | |
| Measurement Mode | Series/Parallel | √ |
| Auto Power Off | √ | |
| Low Battery Indication | ≤6.8V | √ |
| Data Hold | √ | |
| Relative Mode | √ | |
| USB Interface | √ | |
| USB Interface/PC Data Records | 60000 | |
| LCD Backlight | √ | |
| Analogue Bar Graph | 26 | |
| Deviation Ratio Measurement | √ | |
| Comparsion Function | √ | |
| Calibration Function | √ | |
| Output Impedance | 120Ω | √ |
| Auto LCR Smart Check and Measurement | √ | |
| General Characteristic | ||
| Power | 9V Battery（6F22) or USB | |
| LCD Size | 40 X 63mm | |
| Product Colour | Red and Grey | |
| Product Net Weight | 374g | |
| Product Size | 96 X 193 X 47mm | |
| Standard Accessories | Battery,SMD Test Clamp,USB Interface Cable,Multi-Purpose Socket,PC Software CD | |
| Standard Individual Packing | Gift Box, English Manual | |
| Standard Quantity Per Carton | 24 PCs | |
| Standard Carton Measurement | 610mm X 450mm X 355mm (0.097 CBM Per Standard Carton) | |
| Standard Carton Cross Weight | 22.3Kg | |
| Optional Accessories* | ||
| USB Power Adapter | ||
Brand
UNI T
Based on 0 reviews
Be the first to review “UT612 LCR Meters”
Related products
-
LCR Meter
UT601 Inductance Capacitance Meters
UT600 series RCL meter is a kind of 3.5-bithandheld digital meter with stable performance, safety, reliability, highaccuracy and manual range. It can be used to measure the magnification times β of audion, diode forward voltage drop and circuit continuity. UT601has wide capacitance measurement range from 0.1pF～20mF and highaccuracy. UT602 can hold data. UT 600 series is applicable to testingresistance, capacitance and inductance of electronic laboratory, productionline, maintenance point and teaching. It is the ideal tool of maintaining formany users
SKU: n/a -
LCR Meter
UT620 Series Digital Micro Ohm Meters
UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.
SKU: UN62B0TUOM -
LCR Meter
MS8910 Smart SMD Tester (R/C)
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30ΩSKU: n/a -
LCR Meter
UT622A Digital Inductance LCR Meter
Specifications UT622A UT622C UT622E Certificates CE, RoHS Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz Test signal level 0.1Vrms, 0.3Vrms, 1Vrms Output impedance 100Ω Measurement parameters Primary: L/C/R/Z
Secondary: D/Q/θ/ESRPrimary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR Auto LCR √ Test terminals Three-terminal test jacks, five-terminal test sockets Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s) DCR test rate — — Fast (20 times/s), medium (5 times/s), or slow (2 times/s) Ranging mode Auto/hold Tolerance range 1%~20% Testing circuit mode Series/parallel mode Clearing correction Open/short circuit Fuse of test ports 0.1A/250V Communication interface Mini-USB LED alarm for tolerance
(pass: green; fail: red)√ √ √ Display range Maximum reading 99999 Minimum resolution 0.0001 Maximum accuracy 0.001 L 0.00μH~99.999H C 0.00pF~99.999mF Z/R 0.0000Ω~9.9999MΩ ESR 0.0000Ω~999.99Ω D 0.0000~9.9999 Q 0.0000~99999 θ -179.9°~179.9° DCR — — 0.01mΩ–20.000MΩ Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) General Characteristics Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A Display 2.8′ TFT LCD 320X240 Product net weight 420g Product size 93mm x 192mm x 44mm Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual SKU: n/a
There are no reviews yet.