Features
1. 10 sets of data storage
2. High/Low output voltage warning
3. LCD backlight
4. Light weight, portable
20 in stock
Features
1. 10 sets of data storage
2. High/Low output voltage warning
3. LCD backlight
4. Light weight, portable
₨1,717
20 in stock
CompareFeatures
1. 10 sets of data storage
2. High/Low output voltage warning
3. LCD backlight
4. Light weight, portable
Weight | 0.1 kg |
---|---|
Dimensions | 8 × 3 × 1 cm |
Specifications | Range | Remark | |||
Input Voltage Range (V) | 3V-9V | If higher than 9V, display OL | |||
Voltage Resolution | 0.01V | ||||
Voltage Monitoring Accuracy | ±1% | ||||
Current Monitoring Range (A) | 0A~3A | If higher than 3A, display OL | |||
Current Monitoring Accuracy | ±(1%±2) | Lower than 500mA:±3,(a% Reading+b Number) | |||
Current Resolution | 0.01A | If lower than 50mA, display 0.00 | |||
Capacity | 0~9999mAH | If higher than 9999, display OL | |||
Capacity Data Storage | 10 Groups | ||||
Display Way | LCD | Backlight | |||
Warning | √ | Higher than 5.3V lower than 4.7V | |||
Buttons | √ | ||||
Contamination Level | 2 | ||||
Working Temperature | 0℃∽40℃ | ||||
Storage Temperature | -10℃∽50℃ | ||||
Relative Humidity | <75% |
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
Specifications | UT622A | UT622C | UT622E |
Certificates | CE, RoHS | ||
Test frequency | 100Hz, 120Hz, 1kHz, 10kHz | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz |
Test signal level | 0.1Vrms, 0.3Vrms, 1Vrms | ||
Output impedance | 100Ω | ||
Measurement parameters | Primary: L/C/R/Z Secondary: D/Q/θ/ESR |
Primary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR | |
Auto LCR | √ | ||
Test terminals | Three-terminal test jacks, five-terminal test sockets | ||
Test rate | Fast (20 times/s), medium (5 times/s), or slow (2 times/s) | ||
DCR test rate | — | — | Fast (20 times/s), medium (5 times/s), or slow (2 times/s) |
Ranging mode | Auto/hold | ||
Tolerance range | 1%~20% | ||
Testing circuit mode | Series/parallel mode | ||
Clearing correction | Open/short circuit | ||
Fuse of test ports | 0.1A/250V | ||
Communication interface | Mini-USB | ||
LED alarm for tolerance (pass: green; fail: red) |
√ | √ | √ |
Display range | |||
Maximum reading | 99999 | ||
Minimum resolution | 0.0001 | ||
Maximum accuracy | 0.001 | ||
L | 0.00μH~99.999H | ||
C | 0.00pF~99.999mF | ||
Z/R | 0.0000Ω~9.9999MΩ | ||
ESR | 0.0000Ω~999.99Ω | ||
D | 0.0000~9.9999 | ||
Q | 0.0000~99999 | ||
θ | -179.9°~179.9° | ||
DCR | — | — | 0.01mΩ–20.000MΩ |
Temperature coefficient | 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) | ||
General Characteristics | |||
Power | 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A | ||
Display | 2.8′ TFT LCD 320X240 | ||
Product net weight | 420g | ||
Product size | 93mm x 192mm x 44mm | ||
Standard accessories | Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual |
There are no reviews yet.