Features
1. 10 sets of data storage
2. High/Low output voltage warning
3. LCD backlight
4. Light weight, portable
20 in stock
Features
1. 10 sets of data storage
2. High/Low output voltage warning
3. LCD backlight
4. Light weight, portable
₨1,717
20 in stock
CompareFeatures
1. 10 sets of data storage
2. High/Low output voltage warning
3. LCD backlight
4. Light weight, portable
Weight | 0.1 kg |
---|---|
Dimensions | 8 × 3 × 1 cm |
Specifications | Range | Remark | |||
Input Voltage Range (V) | 3V-9V | If higher than 9V, display OL | |||
Voltage Resolution | 0.01V | ||||
Voltage Monitoring Accuracy | ±1% | ||||
Current Monitoring Range (A) | 0A~3A | If higher than 3A, display OL | |||
Current Monitoring Accuracy | ±(1%±2) | Lower than 500mA:±3,(a% Reading+b Number) | |||
Current Resolution | 0.01A | If lower than 50mA, display 0.00 | |||
Capacity | 0~9999mAH | If higher than 9999, display OL | |||
Capacity Data Storage | 10 Groups | ||||
Display Way | LCD | Backlight | |||
Warning | √ | Higher than 5.3V lower than 4.7V | |||
Buttons | √ | ||||
Contamination Level | 2 | ||||
Working Temperature | 0℃∽40℃ | ||||
Storage Temperature | -10℃∽50℃ | ||||
Relative Humidity | <75% |
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.
Analog bandwidth | 150MHz | 250MHz | ||
Channels | 2+16 digital | 4+16 digital | 2+16 digital | 4+ 16digital |
Sampling rate (Analog) | 2.5GS/s (Single channel), 1.25GS/s (Dual channels) | |||
Sampling rate (Digital) | 1.25GS/s (Eight channels), 625MS/s(Sixteen channels) | |||
Memory depth | 70Mpts | |||
Waveform capture rate | 200,000wfms/s | |||
Time base scale | 2ns/div~50s/div (Real-time sampling rate, memory depth display ) | |||
Time base scale (digital) | 2ns/div~40S/div[Step by 1-2-4 stall] | |||
Input impedance | (1MΩ±1%) II (20pF±3pF) | |||
Input impedance digital | (101kΩ±1%) II (9pF±1pF) | |||
Vertical scale | 1mV/div~20 V/div (1 MΩ) | |||
DC gain accuracy | <5mV: ±3%, ≥5mV: ±2% | |||
Waveform record | 100,000 frames | |||
Trigger types | Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
|||
Bus decode | RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay | |||
Waveform operations | A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations | |||
Auto measurements |
Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A |
|||
Measurement display | 5 types | |||
Measurement statistics | Average, Max, Min, standard deviation and number of measurements | |||
Frequency counter | 6 bits | |||
Standard interfaces | USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA | |||
Standard Accessories |
USB interface cable | UT-D14 | ||
Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) | UT-P06 | |||
Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) | UT-P05 | |||
16CH Logic analyzer probe | UT-15M |
There are no reviews yet.