The device is an intelligent wire tracker which consists of the transmitter and receiver, this kit is designed with strong anti-interference ability. The receiver can quickly and accurately locate the target cable. This kit can automatically identify open, short, polarity, and quickly distinguish cable failure.
Wire Tracker
UT 683KIT Wire Tracer
Description | |
Certificates | CE, RoHS |
Transmitter | |
Port flashing | √ |
Wire tracking | √ |
Line alignment | √ |
Open-short test | 10kΩ |
Polarity test | √ |
Operating time | >8 hours |
Receiver | |
Wire tracking | RJ11>3000m; RJ45>100m |
NCV function | √ |
Headset jack | 3.5mm |
Low battery indication | √ |
Operating time | >5 hours |
GENERAL CHARACTERISTICS | |
Power | 1050mAh rechargeable lithium battery |
Product net weight | Transmitter: around 95g; Receiver: around 127g |
Product size | Transmitter-130mm x 51mm x 28mm; Receiver-197mm x 48mm x 34mm |
Standard accessories | USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual |
Standard individual packing | Gift box, carrying bag |
Standard quantity per carton | 20pcs |
Standard carton measurement | 480mm x 370mm x 325mm |
Standard carton gross weight | About 10kg |
₨10,027 ₨10,655
Weight | 0.3 kg |
---|---|
Dimensions | 20 × 5 × 3 cm |
Based on 0 reviews
Be the first to review “UT 683KIT Wire Tracer”
-
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Meter Leads
UT L25 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- If you want to change your multimeter test lead, this is a great choice.
- Double insulated wire.
- Removable tip.
SKU: n/a -
DC Power Supplies
UTP 3305C DC POWER SUPPLY
Specifications Model UTP3305C Output voltage 0~30V (CH1/CH2) Output current 0~5A (CH1/CH2) Output power 315W Load regulation Voltage <0.01%+5mV Current <0.1%+10mA Line regulation Voltage <0.01%+3mV Current <0.1%+3mA Resolution Voltage 10mV Current 1mA Accuracy (25℃±5℃) Voltage <0.5%+20mV Current <0.5%+10mA Ripple (20Hz~20MHz) Voltage ≤2mVrms Current ≤3mArms Output temperature
coefficientVoltage ≤150ppm Current ≤150ppm Voltage rise delay ≤100ms (10% rated load) Parallel/Series load regulation ≤0.1%+0.1V CH3 output features Voltage 5V Current 3A Voltage accuracy ±50mV Load regulation ±50mV Interfaces USB Device, RS-232 General Characteristics Power AC 100V/120V/220V/230V±10%, 50Hz/60Hz Display 4 windows, LED Product net weight 9.1kg Product size 260mm x 176mm x 317mm Standard accessories USB and RS-232 interface cables, output cables Standard individual packing Carton box Standard quantity per carton 1pcs Standard carton measurement 440mm x 388mm x 295mm Standard carton gross weight 10kg SKU: n/a -
Rework & Soldering Station
YH 939BD+ SOLDERING STATION
MODEL 939BD+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10% Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0~40℃ relative humidity<80% Storage environment -20~80℃ relative humidity<80% Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃~480℃ Temperature Stability ±1℃(Static) Display Mode Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance <2Ω Tip-to-Ground Voltage <2mV SKU: n/a
There are no reviews yet.