-2%

UT81C Scope Digital Multimeter

Availability:

9 in stock


UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.

Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance

45,000 46,000

9 in stock

Compare

UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.

Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance.
Category:
Weight 0.5 kg
Dimensions 20 × 10 × 5 cm
Specifications Range UT81C
DMM Specifications
DC voltage (V) 1000V ±(0.8%+8)
AC voltage (V) 750V ±(1%+15)
DC current (A) 10A ±(1%+8)
AC current (A) 10A ±(1.5%+8)
Resistance (Ω) 40MΩ ±(1%+5)
Capacitance (F) 100μF ±(3%+8)
Frequency (Hz) 10Hz~10MHz ±(0.1%+3)
Scope Specifications
Bandwidth 16MHz
Sampling rate 80MS/s
Vertical accuracy ±(5%+1)
Vertical sensitivity 20mV/div~500V/div (1-2-5)
Time-base accuracy ±(0.01%+1)
Time-base range 50ns/div – 5s/div(1-2-5)
Features
Display count 4000
Auto range
Duty cycle 0.1~99.9%
Diode
Auto power off
Continuity buzzer
Display 160 x 160 monochrome
Trigger types Auto run/Normal/Single shot
Memory 10 screens and setups
Contrast and brightness setup
Low battery indication
USB interface
LCD backlight
Input impedance for DCV Around 10MΩ
General Characteristics
Power 1.5V battery (R6) x 4
Display 60mm x 60mm
Product color Red and grey
Product net weight 498g
Product size 200mm x 100mm x 48mm
Standard accessories Batteries, test lead, alligator clip, USB interface cable, PC software CD
Standard individual packing Gift box, English manual
Standard quantity per carton 12pcs
Standard carton measurement 485mm x 450mm x 260mm (0.057CBM per standard carton)
Standard carton gross weight 16.4kg
Optional accessories Scope probe, AC power adaptor

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT81C Scope Digital Multimeter”

There are no reviews yet.

  • UT502A Insulation Resistance Tester

    0 out of 5
    (0)

    1. 2000 count LCD display, overload indication, backlight

    2. AC voltage measurement, auto power off
    3. Auto discharge
    4. Continuous measurements mode, red warning light and buzzer function
    5. Continuous low resistance measurement
    6.  PI and DAR measurement, auto resistivity calculation
    7. Low resistance returning to zero function to improve accuracy
    SKU: n/a
  • Digital Pen type Multimeter-ET8909, 4 Digit

    0 out of 5
    (0)

    Digital Pen type Multimeter-ET8909, 4 Digit

    SKU: n/a
  • UT622A Digital Inductance LCR Meter

    0 out of 5
    (0)
    Specifications UT622A UT622C UT622E
    Certificates CE, RoHS
    Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
    Test signal level  0.1Vrms, 0.3Vrms, 1Vrms
    Output impedance 100Ω
    Measurement parameters Primary: L/C/R/Z
    Secondary: D/Q/θ/ESR
    Primary: L/C/R/Z/DCR  Secondary: D/Q/θ/ESR
    Auto LCR
    Test terminals Three-terminal test jacks, five-terminal test sockets
    Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
    DCR test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
    Ranging mode Auto/hold
    Tolerance range 1%~20%
    Testing circuit mode Series/parallel mode
    Clearing correction Open/short circuit
    Fuse of test ports 0.1A/250V
    Communication interface Mini-USB
    LED alarm for tolerance
    (pass: green; fail: red)
    Display range
    Maximum reading 99999
    Minimum resolution 0.0001
    Maximum accuracy 0.001
    L 0.00μH~99.999H
    C 0.00pF~99.999mF
    Z/R 0.0000Ω~9.9999MΩ
    ESR 0.0000Ω~999.99Ω
    D 0.0000~9.9999
    Q 0.0000~99999
    θ -179.9°~179.9°
    DCR 0.01mΩ–20.000MΩ
    Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C)
    General Characteristics
    Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A
    Display 2.8′ TFT LCD 320X240
    Product net weight 420g
    Product size 93mm x 192mm x 44mm
    Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual
    SKU: n/a
  • UT231 Digital Power Clamp Meters

    0 out of 5
    (0)

    UT 230 series is a handheld intelligent power clamp meter, which combines with digital current meter and power meter. It is equipped with powerful measurement and data processing software, which can help complete measurements, calculations and displays of voltage, current, active power, power factor, phase angle, apparent power, reactive power, power, frequency, temperature and other parameters.

    SKU: n/a
  • JM-6093 Household DIY Screwdriver Tool Set1

    0 out of 5
    (0)

    Features:

    • Portable box with transparent cover.
    • Adjustable screwdriver bits.
    • Non-slip handle is made of PP & TPR material.
    • 140 mm tweezzers.
    • Morble extension bar.
    SKU: n/a