UT89X/UT89XD is a reliable hand-held 35/6 bit digital multimeter with true RMS sine wave measurement. It can measure Max. 1000V DC/AC voltage, Max. 20A DC/AC current, resistance, capacitance, frequency, diode, hFE, continuity and NCV, quickly distinguishing between neutral and live wires accurately. UT89X can measure temperature and detect neutral and live wires with a test lead. UT89XD can perform LED test. Equipped with audible and visible alarm, flashlight and auto backlight functions, this series can be used in dark environment. It attracts users with its bi-color durable case, modern exterior and multiple functions.
UT89X Digital Multimeter
1. 1000V AC/DC; 20A AC/DC
₨6,100 ₨6,278
Weight | 0.4 kg |
---|---|
Dimensions | 19 × 9 × 5 cm |
Specifications | Range | UT89X |
DC voltage (V) | 600mV/6V/60V/600V/1000V | ±(0.5%+2) |
AC voltage (V) | 6V/60V/600V/1000V | ±(0.8%+5) |
DC current (A) | 60μA/60mA/600mA/20A | ±(0.8%+8) |
AC current (A) | 60mA/600mA/20A | ±(1%+12) |
Resistance (Ω) | 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ | ±(0.8%+3) |
Capacitance (F) | 6nF/60nF/600nF/6μF/60μF/600μF/6mF/60mF/100mF | ±(2.5%+20) |
Frequency (Hz) | 9.999Hz/9.999MHz | ±(0.1%+4) |
Duty cycle | 0.1%~99.9% | ±(2%+5) |
Temperature (℃) | -40℃~1000℃ | ±(2%+4) |
Temperature (℉) | -40℉~1832℉ | ±(2%+8) |
Features | ||
Display count | 6000 | |
Sampling rate | 3 times/s | |
True RMS | √ | |
AC voltage frequency response | 45~1000Hz | |
AC current frequency response | 45~1000Hz | |
Live wire test | √ | |
Audible/visual alarm | V/A/Cap/Diode/hFE/NCV/Live (UT89X)/LED (UT89XD) | |
Diode/Continuity test | √ | |
Transistor hFE | √ | |
Dual range NCV test | √ | |
Auto power off | √ | |
Low battery indication | √ | |
Data hold | √ | |
Function selection | SELECT | √ |
Flashlight | √ | |
Auto backlight | √ | |
General Characteristics | ||
Power | 1.5V battery (R03) x 4 | |
Display | 61mm x 36mm | |
Product color | Red and grey | |
Product net weight | 345g | |
Product size | 189mm x 89mm x 53mm | |
Standard accessories | Batteries, test lead, k-type temperature probe | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 40pcs | |
Standard carton measurement | 490mm x 450mm x 340mm | |
Standard carton gross weight | 23.5kg |
Based on 0 reviews
Be the first to review “UT89X Digital Multimeter”
-
LCR Meter
UT620 Series Digital Micro Ohm Meters
UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.
SKU: UN62B0TUOM -
Clamp Meters
AC DIGITAL CLAMP METER KEW 2117R
AC DIGITAL CLAMP METER KEW 2117R
• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.01A resolution
• Accurate reading with True RMS
60/600/1000A auto-ranging
• Long battery life
• Safety Standard
IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a -
Multi Function Calibrator
UT705 Single Function Loop Calibrator
1. Measures: DC voltage, DC current, 4-20mA loop current
2. Output functions: DC current, analog transmitter, 24V loop3. Up to 0.02% accuracy current measurement at the same time4. Automatic ramp for DC current output5. Manual stepping and automatic stepping and ramping output6. Stores and recalls setupsSKU: n/a
There are no reviews yet.