-
×
MECHANIC lead-free ESD soldering tip 900M-T-IS
- Vendor:
superworld
Subtotal: ₨450
Oscilloscopes
UTD2072CEX-II Digital Storage Oscilloscope
Availability:
5 in stock
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate
3. Up to 28Mpts memory depth
4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),
10kHz or 100kHz
5. Max 10Mpts waveform record
6. 8-inch TFT LCD, WVGA (800X480)
₨0
5 in stock
CompareUTD2000CEX-II series is cost-effective benchtop digital storage oscilloscope with 8-inch screen, 800×480 high resolution display, 1GS/s sampling rate, 20,000wfms/s waveform capture rate, 25kpts memory depth, a variety of trigger types, which is more suitable for general signal measurements.
Applications:
Serial data analysis, jitter analysis, data storage device testing, electric vehicle and electronics equipment design, evaluating frequency response of sound equipment, troubleshooting automotive engines, electronics technician repair and maintenance.
| Weight | 3.5 kg |
|---|---|
| Dimensions | 34 × 16 × 11 cm |
| Specifications | |
| Model | UTD2072CEX-II |
| Bandwidth | 70MHz |
| Channels | 2 |
| Sampling rate | 1GS/s (single channel), 500MS/s (dual channels) |
| Rise time | ≤5ns |
| Memory depth | 25kpts |
| Waveform capture rate | ≥20,000wfms/s |
| Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
| Time base scale (s/div) | 2ns/div~50s/div |
| Input impedance | (1MΩ±2%)//(22pF±3pF) |
| Storage methods | Setup, wave, bitmap |
| Trigger types | Edge, pulse width, slope, video, runt, window |
| Waveform operations | A+B, A-B, A×B, A/B, FFT |
| Auto measurements | Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, C ycRMS, Period, Freq,Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR , FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 paramet ers in total |
| Number of measurements | Display 5 measurements at the same time |
| Measurement statistics | Average, Max, Min, standard deviation, number of measurements |
| Frequency counter | 6 bits |
| Interfaces | USB-OTG, Pass/Fail |
| General Characteristics | |
| Power | 100~240V ACrms, 50Hz/60Hz |
| Display | 8-inch TFT LCD, WVGA (800 x 480) |
| Product color | White and grey |
| Product net weight | 3.5kg |
| Product size | 336mm x 164mm x 108mm |
| Standard accessories | Probe x 2 (1x, 10x switchable), PC software CD, power cord, USB interface cable |
| Standard individual packing | Carton box |
| Standard quantity per carton | 2pcs |
| Standard carton measurement | 450mm x 420mm x 280mm |
| Standard carton gross weight | 8kg |
Brand
UNI T
Based on 0 reviews
Be the first to review “UTD2072CEX-II Digital Storage Oscilloscope”
-
LCR Meter
MS8910 Smart SMD Tester (R/C)
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30ΩSKU: n/a
Related products
-
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Oscilloscopes
UTD2025CL Digital Storage Oscilloscope
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. Special Print Scree Feature;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 28 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
SKU: n/a
There are no reviews yet.