UTD2072CEX-II Digital Storage Oscilloscope

Availability:

5 in stock


1. 2 channels

2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate
3. Up to 28Mpts memory depth
4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),
10kHz or 100kHz
5. Max 10Mpts waveform record
6. 8-inch TFT LCD, WVGA (800X480)

0

5 in stock

Compare
UTD2000CEX-II series is cost-effective benchtop digital storage oscilloscope with 8-inch screen, 800×480 high resolution display, 1GS/s sampling rate, 20,000wfms/s waveform capture rate, 25kpts memory depth, a variety of trigger types, which is more suitable for general signal measurements.
Applications:
Serial data analysis, jitter analysis, data storage device testing, electric vehicle and electronics equipment design, evaluating frequency response of sound equipment, troubleshooting automotive engines, electronics technician repair and maintenance.
Category:
Weight 3.5 kg
Dimensions 34 × 16 × 11 cm
Specifications
Model UTD2072CEX-II
Bandwidth 70MHz
Channels 2
Sampling rate 1GS/s (single channel), 500MS/s (dual channels)
Rise time ≤5ns
Memory depth 25kpts
Waveform capture rate ≥20,000wfms/s
Vertical scale (V/div) 1mV/div~20V/div (1MΩ)
Time base scale (s/div) 2ns/div~50s/div
Input impedance (1MΩ±2%)//(22pF±3pF)
Storage methods Setup, wave, bitmap
Trigger types Edge, pulse width, slope, video, runt, window
Waveform operations A+B, A-B, A×B, A/B, FFT
Auto measurements Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, C ycRMS, Period, Freq,Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR , FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 paramet ers in total
Number of measurements Display 5 measurements at the same time
Measurement statistics Average, Max, Min, standard deviation, number of measurements
Frequency counter 6 bits
Interfaces USB-OTG, Pass/Fail
General Characteristics
Power 100~240V ACrms, 50Hz/60Hz
Display 8-inch TFT LCD, WVGA (800 x 480)
Product color White and grey
Product net weight 3.5kg
Product size 336mm x 164mm x 108mm
Standard accessories Probe x 2 (1x, 10x switchable), PC software CD, power cord, USB interface cable
Standard individual packing Carton box
Standard quantity per carton 2pcs
Standard carton measurement 450mm x 420mm x 280mm
Standard carton gross weight 8kg

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UTD2072CEX-II Digital Storage Oscilloscope”

There are no reviews yet.

  • UT501A Insulation Resistance Tester

    0 out of 5
    (0)

    1. 2000 count LCD display, overload indication, backlight

    2. AC voltage measurement, auto power off
    3. Auto discharge
    4. Continuous measurements mode, red warning light and buzzer function
    SKU: n/a
  • Mechanic Special Solder Paste XG-50 35G 183°C

    0 out of 5
    (0)

    This is solder paste for soldering small SMD components in a reflow oven or with a hot air soldering station. comes in a small container for prototyping or repairing job.This pack is the right amount of solder paste for most hobby projects. This paste is the replacement for solder wire used in Through-hole soldering, some times solder flux is referred to as solder paste.

    SKU: n/a
  • UNI-T UTG4162A Function/Arbitrary Waveform Generator

    0 out of 5
    (0)
    bandwidth 160MHz
    Channels 2
    Sampling rate 500MS/s
    Waveforms Sine, square, ramp, harmonic, pulse, noise, DC voltage, arbitrary
    Working modes Output on/off, continuous, modulation, sweep, burst
    Modulations AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM
    Frequency Characteristics
    Sine 1μHz~160MHz
    Square/Pulse 1μHz~50MHz
    Slope 1μHz~4MHz
    Harmonic 1μHz~80MHz
    Noise (-3dB) 160MHz bandwidth
    Resolution 1μHz
    Arbitrary Waveform
    Frequency range 1μHz~40MHz
    Length 8~32Mpts
    Vertical resolution 16 bits
    Min rise/fall time (typical: 1Vpp) <5ns
    General Characteristics
    Power 100V~240V ACrms, 50Hz/60Hz
    Display 8-inch TFT LCD, WVGA (800 x 480)
    Product color White and grey
    Product net weight 3.5kg
    Product size 336mm x 164mm x 108mm
    Standard accessories BNC-BNC cable x 2, USB interface cable, PC software CD, power cord
    Standard individual packing Carton box
    Standard quantity per carton 1pcs
    Standard carton measurement 405mm x 225mm x 265mmv
    SKU: n/a
  • UPO2102CS Ultra Phosphor Oscilloscope

    0 out of 5
    (0)

    Features and Benefits:
    1、Sample Rate up to 1GS/s;
    2、Channels 2/;
    3、Bandwidth 100MHz,;
    4、Memory Depth 32Mpts(Standard);
    5、Waveform Capture Rate up to 30,000wfms/s;
    6、With 256 level intensity grading display;
    7、Up to 65,000 frames for Waveform Record ,Replay;
    8、Support serial bus trigger and decoding;
    9、8 inches, TFT LCD,WVGA(800*480);
    10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

    SKU: UT21P02CSO
  • UT-L40 SMD patch clamp

    0 out of 5
    (0)
    • Leads length: 450mm
    • Probe length: 5mm
    • Temperature condition: -10°C~40°C
    • Safety level: CAT Ⅱ1000V 2A
    • Features and application: used to SMT components, for UT611, UT612
    • Amount: 1PCS

     

    SKU: n/a