UTD2102CEX-II Digital Storage Oscilloscope

Availability:

Out of stock


1. 2 channels

2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate
3. Up to 28Mpts memory depth
4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),
10kHz or 100kHz
5. Max 10Mpts waveform record
6. 8-inch TFT LCD, WVGA (800X480)

0

Out of stock

Compare
UTD2000CEX-II series is cost-effective benchtop digital storage oscilloscope with 8-inch screen, 800×480 high resolution display, 1GS/s sampling rate, 20,000wfms/s waveform capture rate, 25kpts memory depth, a variety of trigger types, which is more suitable for general signal measurements.
Applications:
Serial data analysis, jitter analysis, data storage device testing, electric vehicle and electronics equipment design, evaluating frequency response of sound equipment, troubleshooting automotive engines, electronics technician repair and maintenance.
Category:
Weight 3.5 kg
Dimensions 34 × 16 × 11 cm
Specifications
Model UTD2102CEX-II
Bandwidth 100MHz
Channels 2
Sampling rate 1GS/s (single channel), 500MS/s (dual channels)
Rise time ≤3.5ns
Memory depth 25kpts
Waveform capture rate ≥20,000wfms/s
Vertical scale (V/div) 1mV/div~20V/div (1MΩ)
Time base scale (s/div) 2ns/div~50s/div
Input impedance (1MΩ±2%)//(22pF±3pF)
Storage methods Setup, wave, bitmap
Trigger types Edge, pulse width, slope, video, runt, window
Waveform operations A+B, A-B, A×B, A/B, FFT
Auto measurements Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, C ycRMS, Period, Freq,Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR , FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 paramet ers in total
Number of measurements Display 5 measurements at the same time
Measurement statistics Average, Max, Min, standard deviation, number of measurements
Frequency counter 6 bits
Interfaces USB-OTG, Pass/Fail
General Characteristics
Power 100~240V ACrms, 50Hz/60Hz
Display 8-inch TFT LCD, WVGA (800 x 480)
Product color White and grey
Product net weight 3.5kg
Product size 336mm x 164mm x 108mm
Standard accessories Probe x 2 (1x, 10x switchable), PC software CD, power cord, USB interface cable
Standard individual packing Carton box
Standard quantity per carton 2pcs
Standard carton measurement 450mm x 420mm x 280mm
Standard carton gross weight 8kg

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UTD2102CEX-II Digital Storage Oscilloscope”

There are no reviews yet.

  • UT-L30 Test Leads

    0 out of 5
    (0)
    SKU: n/a
  • YTH 037 PCB CUTTER

    0 out of 5
    (0)
    SKU: n/a
  • TDR-410 Cable Fault Locator

    0 out of 5
    (0)
    • Features:

      • automatic or manual mode:
        • the automatic fault location (AFL),
        • mode with manual range selection and sensitivity,
        • single measurement triggered manually or scanning continuous,
      • 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
      • maximum length of cable up to 4000 m one end of the cable,
      • “Dead zone” measure limited to 0.5 m,
      • 2.5 “LCD screen with backlight,
      • scan automatically or manually trigger,
      • sensitivity set manually or automatically adjusted,
      • adjustable impedance matching,
      • propagation coefficient adjustment 1% to 99%,
      • waterproof and resistant to mechanical housing.
      • small size and weight.
      • economical power system – 30 hours of continuously scan on one battery set..

      Accessories:

      • 0,6 m double-wire lead: WAPRZ0X6DZBB
      • red crocodile clip: WAKRORE20K02
      • Krokodylek czarny: WAKROBL20K01
      • cover M-2: WAFUTM2
    SKU: n/a
  • SVC 2000VA

    0 out of 5
    (0)

    Input=120V 270
    Output=220
    Under and Over Volt Protection
    Surge Protection
    Over Load and Heat Protection
    Copper Wind with LCD Display

    SKU: n/a
  • UT383-BT Mini Light Meter

    0 out of 5
    (0)
    SKU: n/a