UTD2102CEX-II Digital Storage Oscilloscope

Availability:

Out of stock


1. 2 channels

2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate
3. Up to 28Mpts memory depth
4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),
10kHz or 100kHz
5. Max 10Mpts waveform record
6. 8-inch TFT LCD, WVGA (800X480)

0

Out of stock

Compare
UTD2000CEX-II series is cost-effective benchtop digital storage oscilloscope with 8-inch screen, 800×480 high resolution display, 1GS/s sampling rate, 20,000wfms/s waveform capture rate, 25kpts memory depth, a variety of trigger types, which is more suitable for general signal measurements.
Applications:
Serial data analysis, jitter analysis, data storage device testing, electric vehicle and electronics equipment design, evaluating frequency response of sound equipment, troubleshooting automotive engines, electronics technician repair and maintenance.
Category:
Weight 3.5 kg
Dimensions 34 × 16 × 11 cm
Specifications
Model UTD2102CEX-II
Bandwidth 100MHz
Channels 2
Sampling rate 1GS/s (single channel), 500MS/s (dual channels)
Rise time ≤3.5ns
Memory depth 25kpts
Waveform capture rate ≥20,000wfms/s
Vertical scale (V/div) 1mV/div~20V/div (1MΩ)
Time base scale (s/div) 2ns/div~50s/div
Input impedance (1MΩ±2%)//(22pF±3pF)
Storage methods Setup, wave, bitmap
Trigger types Edge, pulse width, slope, video, runt, window
Waveform operations A+B, A-B, A×B, A/B, FFT
Auto measurements Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, C ycRMS, Period, Freq,Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR , FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 paramet ers in total
Number of measurements Display 5 measurements at the same time
Measurement statistics Average, Max, Min, standard deviation, number of measurements
Frequency counter 6 bits
Interfaces USB-OTG, Pass/Fail
General Characteristics
Power 100~240V ACrms, 50Hz/60Hz
Display 8-inch TFT LCD, WVGA (800 x 480)
Product color White and grey
Product net weight 3.5kg
Product size 336mm x 164mm x 108mm
Standard accessories Probe x 2 (1x, 10x switchable), PC software CD, power cord, USB interface cable
Standard individual packing Carton box
Standard quantity per carton 2pcs
Standard carton measurement 450mm x 420mm x 280mm
Standard carton gross weight 8kg

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UTD2102CEX-II Digital Storage Oscilloscope”

There are no reviews yet.

  • TND 2000VA

    0 out of 5
    (0)

    Input Voltage=140-250
    Output Voltage=220
    Copper Wind
    Analog Display
    Under and Over Volt Indication
    Under Volt Protection
    Dual Output Socket 110/220

    SKU: n/a
  • UNI-T UT276A+ Auto Range Digital Clamp Earth Ground Tester

    0 out of 5
    (0)

    ● Auto range
    ● Data hold
    ● Data recall
    ● LCD backlight
    ● Resistance limit alarm
    ● Low battery indication
    ● Auto calibration

    SKU: n/a
  • LM200C Laser Distance Meters (Discontinued)

    0 out of 5
    (0)

    Features of LM80C/LM120C/LM200C Laser Distance Meters

    ● 2.4-inch color screen

    ● 12 measurement modes
    ● Electronic leveling
    ● 3 selectable measurement references
    ● USB 3.0 supply power
    ● 100 groups of data storage
    ● Rotatable screen
    ● Camera-aided measurement
    ● 2m drop test
    ● IP65 dust and water proof
    SKU: n/a
  • AC/DC DIGITAL CLAMP METER KT 203

    0 out of 5
    (0)

    AC/DC DIGITAL CLAMP METER KT 203

    • Small and handy clamp meter
    • IEC 6101C Clamp meter
    • DMM function A0-1 Safety Standard CAT Ⅲ 300V, CAT Ⅱ 600V

    • 400A AC/DCV, DCV, Ω, Continuity Buzzer.

    SKU: n/a
  • RF-SD10

    0 out of 5
    (0)
    SKU: n/a
  • UT60S

    0 out of 5
    (0)
    1. 9999 counts
    2. True RMS
    3. Bluetooth
    4. Duty cycle
    5. Diode/Continuity test
    6. Temperature
    7. Non-contact voltage
    8. Analog bar/Data hold
    9. Backlight/Relative mode
    10. Auto/Manual range
    11. Low battery indication
    12. Three-color LED light indicator
    SKU: n/a