UTD2102CEX-II Digital Storage Oscilloscope

Availability:

Out of stock


1. 2 channels

2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate
3. Up to 28Mpts memory depth
4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),
10kHz or 100kHz
5. Max 10Mpts waveform record
6. 8-inch TFT LCD, WVGA (800X480)

0

Out of stock

Compare
UTD2000CEX-II series is cost-effective benchtop digital storage oscilloscope with 8-inch screen, 800×480 high resolution display, 1GS/s sampling rate, 20,000wfms/s waveform capture rate, 25kpts memory depth, a variety of trigger types, which is more suitable for general signal measurements.
Applications:
Serial data analysis, jitter analysis, data storage device testing, electric vehicle and electronics equipment design, evaluating frequency response of sound equipment, troubleshooting automotive engines, electronics technician repair and maintenance.
Category:
Weight 3.5 kg
Dimensions 34 × 16 × 11 cm
Specifications
Model UTD2102CEX-II
Bandwidth 100MHz
Channels 2
Sampling rate 1GS/s (single channel), 500MS/s (dual channels)
Rise time ≤3.5ns
Memory depth 25kpts
Waveform capture rate ≥20,000wfms/s
Vertical scale (V/div) 1mV/div~20V/div (1MΩ)
Time base scale (s/div) 2ns/div~50s/div
Input impedance (1MΩ±2%)//(22pF±3pF)
Storage methods Setup, wave, bitmap
Trigger types Edge, pulse width, slope, video, runt, window
Waveform operations A+B, A-B, A×B, A/B, FFT
Auto measurements Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, C ycRMS, Period, Freq,Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR , FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 paramet ers in total
Number of measurements Display 5 measurements at the same time
Measurement statistics Average, Max, Min, standard deviation, number of measurements
Frequency counter 6 bits
Interfaces USB-OTG, Pass/Fail
General Characteristics
Power 100~240V ACrms, 50Hz/60Hz
Display 8-inch TFT LCD, WVGA (800 x 480)
Product color White and grey
Product net weight 3.5kg
Product size 336mm x 164mm x 108mm
Standard accessories Probe x 2 (1x, 10x switchable), PC software CD, power cord, USB interface cable
Standard individual packing Carton box
Standard quantity per carton 2pcs
Standard carton measurement 450mm x 420mm x 280mm
Standard carton gross weight 8kg

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UTD2102CEX-II Digital Storage Oscilloscope”

There are no reviews yet.

  • Micro Lens UT-Z002

    0 out of 5
    (0)
    SKU: n/a
  • UT 205A+

    0 out of 5
    (0)
    1. 1000A AC current measurement
    2. 1000V AC/DC voltage measurement
    3. 600A inrush current measurement (UT206A+)
    4. Temperature  (UT206A+)
    5. NCV (UT206A+)
    6. ACV frequency 10Hz~10kHz
    7. Jaw opening: 45mm
    8. Resistance / capacitance / frequency measurement
    9. Auto range / backlight / low battery indication
    10. Continuity / diode / duty cycle
    11. MAX/MIN
    12. Data hold / flashlight / relative mode
    13. Auto power off
    14. CAT II 1000V/CAT III 600V
    SKU: n/a
  • UT681L Cable Tester

    0 out of 5
    (0)

    Main Features

    1. Tests Ethernet cables and telephone lines

    2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing

    3. Ethernet cables: Shielded/Unshielded test

    4. Visible LED indication

    5. Automatically check circuit breakage, short circuit and cross circuit

    6. Can toggle between fast and slow speed test modes

    7. Single key operation

    8. Manual/auto power off (after 10-minute inactivity)

    9. Low battery indication

    10. Power supplied by 9V layer-built battery

    SKU: n/a
  • TDGC 500VA

    0 out of 5
    (0)

    Input Voltage=220V/230V
    Output Voltage=0-250V
    Maximum Output Current=2
    Copper Wind
    LCD Output Display

    SKU: n/a
  • YIHUA 908D-II LED DIGITAL THERMOSTAT ELECTRONIC SOLDERING IRON

    0 out of 5
    (0)

    1.Portable anti-static thermostat soldering iron, using latest advanced temperature control circuit for precise temperature control.

    2.Heating core uses high quality and durable materials, extending its service life.

    3.The handle uses completely new environmentally friendly and heat resistant materials.
    A high temperature spacer between the handle and the heating tube prevents heat
    transfer and ensures comfortable use.

    4.LED digital display, allowing users to directly monitor the temperature and making
    soldering work easier.

    5.It is equipped with a lock temperature switch. When it is opened to the lock temperature
    state, the temperature is not adjustable; when the switch is turned to the unlocked state,
    the temperature adjustment is resumed.

    6.The 908D is an upgraded version of the 908D, featuring the 908D, with digital temperature
    correction, 0/510/30 minute sleep, and Fahrenheit/Celsius display conversion.

    SKU: n/a