Oscilloscopes
UTD2102CEX-II Digital Storage Oscilloscope
Availability:
Out of stock
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate
3. Up to 28Mpts memory depth
4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),
10kHz or 100kHz
5. Max 10Mpts waveform record
6. 8-inch TFT LCD, WVGA (800X480)
₨0
Out of stock
CompareUTD2000CEX-II series is cost-effective benchtop digital storage oscilloscope with 8-inch screen, 800×480 high resolution display, 1GS/s sampling rate, 20,000wfms/s waveform capture rate, 25kpts memory depth, a variety of trigger types, which is more suitable for general signal measurements.
Applications:
Serial data analysis, jitter analysis, data storage device testing, electric vehicle and electronics equipment design, evaluating frequency response of sound equipment, troubleshooting automotive engines, electronics technician repair and maintenance.
Weight | 3.5 kg |
---|---|
Dimensions | 34 × 16 × 11 cm |
Specifications | |
Model | UTD2102CEX-II |
Bandwidth | 100MHz |
Channels | 2 |
Sampling rate | 1GS/s (single channel), 500MS/s (dual channels) |
Rise time | ≤3.5ns |
Memory depth | 25kpts |
Waveform capture rate | ≥20,000wfms/s |
Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
Time base scale (s/div) | 2ns/div~50s/div |
Input impedance | (1MΩ±2%)//(22pF±3pF) |
Storage methods | Setup, wave, bitmap |
Trigger types | Edge, pulse width, slope, video, runt, window |
Waveform operations | A+B, A-B, A×B, A/B, FFT |
Auto measurements | Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, C ycRMS, Period, Freq,Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR , FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 paramet ers in total |
Number of measurements | Display 5 measurements at the same time |
Measurement statistics | Average, Max, Min, standard deviation, number of measurements |
Frequency counter | 6 bits |
Interfaces | USB-OTG, Pass/Fail |
General Characteristics | |
Power | 100~240V ACrms, 50Hz/60Hz |
Display | 8-inch TFT LCD, WVGA (800 x 480) |
Product color | White and grey |
Product net weight | 3.5kg |
Product size | 336mm x 164mm x 108mm |
Standard accessories | Probe x 2 (1x, 10x switchable), PC software CD, power cord, USB interface cable |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 450mm x 420mm x 280mm |
Standard carton gross weight | 8kg |
Based on 0 reviews
Be the first to review “UTD2102CEX-II Digital Storage Oscilloscope”
-
Temperature and Humidity Meter
UNI-T UT332+ Digital Temperature Humidity Meter
1. Features of UT332+ Temperature Humidity Meter
● ℃/℉ selection
● Response time: around 1 second● Humidity offset settings● Temperature offset settings● Dew point offset settings● Wet-bulb temperature offset settings● Auto power off● Data hold/data recall● MAX/MIN● Auto record time setup● LCD backlight● USB interface for data and powerSKU: n/a -
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
-
Clamp Meters
UT281A True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rd edition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Data hold, backlight, auto power off
SKU: n/a -
There are no reviews yet.