UTG9002C-II Function/Arbitrary Waveform Generator
5 in stock
1. Output waveforms: Sine, square, ramp, pulse, noise, DC, arbitrary
₨44,400 ₨48,899
5 in stock
Compare| Weight | 2.8 kg |
|---|---|
| Dimensions | 26 × 11 × 32 cm |
| Specifications | |
| Model | UTG9002C-II |
| Channel | 1 |
| Bandwidth | 2MHz |
| Sampling rate | 125MS/s |
| Vertical resolution | 14 bits |
| Waveforms | Sine, square, pulse, ramp, noise, DC, arbitrary (20 sets inside ) |
| Sweep modes | Logarithmic, linear |
| Frequency Characteristics | |
| Sine | 1μHz~2MHz |
| Square | 1μHz~2MHz |
| Ramp | 1μHz~200kHz |
| Pulse | 1μHz~2MHz |
| Arbitrary | 1μHz~1MHz |
| Resolution | 1μHz |
| Accuracy | Within 90 days ± 50ppm |
| Within 1 year ± 100ppm | |
| 18℃~28℃ | |
| Output Characteristics | |
| Impedance | 50Ω/High Z |
| Amplitude range | 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) |
| DC offset range | -5Vpp~5Vpp (50Ω) (AC+DC); -10Vpp~10Vpp (high Z) (AC+DC) |
| Amplitude resolution | 1mV |
| General Characteristics | |
| Power | 100~240VAC, 50Hz/60Hz |
| Display | EBTN LCD |
| Product color | White and grey |
| Product net weight | 2.8kg |
| Product size | 265mm x 110mm x 320mm |
| Standard accessories | USB interface cable, power cord, BNC cable with alligator clips , PC software CD |
| Standard individual packing | Carton box |
| Standard quantity per carton | 2pcs |
| Standard carton measurement | 380mm x 330mm x 320mm |
| Standard carton gross weight | 7kg |
Brand
UNI T
Based on 0 reviews
Be the first to review “UTG9002C-II Function/Arbitrary Waveform Generator”
-
Clamp Meters
CLAMP METER AC BM 528F
Product DescriptionBM528F AC Digital Clamp meter Technical parametersFunctionsRangeAccuracy(BM528F)DC Voltage200mV/2V/20V/200V/1000V±（0.8%+2）AC Voltage2V/20V/200V/700V±（1.2%+5）AC Current2A/20A/200A/600A±（2%+10）Ω Resistance200/2K/20K/200K/2M/20MΩ±（1%+3）Capacitance20n/200n/2μ/20μ/200μ/2mF±（3%+5）Frequency200/2K/20K/200K/2M/20MHz±（0.5%+3）℃ / ℉-50℃ ~1000℃-58℉~1832℉
±（1%+5）±（1.2%+6）SKU: n/a -
Thermal Imagers
UTi165A Thermal Imager UNI-T
Specifications Model UTi165A IR resolution 160×120 pixels Field of view (FOV) 56°×42° Thermal sensitivity (NETD) ≤150mk (0.15℃) Temperature range -10~400℃ Spatial resolution (IFOV) 11mrad Frame rate ＜9Hz Measurement accuracy ±2℃ or ±2% whichever is greater Focus Focus free Display modes Thermal Display 2.8”LCD Auto capture of Hi/Lotemperature √ Measurement modes WIFI PC analysis software √ Drop proof 2m IP rating IP65 General Characteristics Power Li-ion battery (3.7V 5000mAh) Product color Red and grey Product net weight 455g Product size 236mm x 75.5 mm x 86mm Standard accessories micro USB cable, micro SD card, Type-C USB cable Standard individual packing Blister, gift box, English manual Standard quantity per carton 5pcs Standard carton measurement 650mm x 355 mm x 180mm Standard carton gross weight About 5kg SKU: n/a -
LCR Meter
UT620 Series Digital Micro Ohm Meters
UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.
SKU: UN62B0TUOM -
Environment Meters
UT337A Carbon Monoxide Meter
UT337A is a portable carbon monoxide meter with wide detection range, short response time, long term stability, and long service life. It provides many functions such as CO concentration display, maximum value, average value, audible and visual alarm, temperature display, etc. It is suitable for carbon monoxide detection in residential homes, restaurants, indoor parking lots and gas heating facilities.
Features:
1. High-sensitivity electrochemical sensor
2. Light and sound alarm
3. Sensor self-check
4. Battery powered, 20 minutes automatic power off
5. Portable
6. The alarm value of CO can be set
7. Maximum value
8. Temperature
9. LCD backlight
SKU: n/a -
Soldering Station
YH 937D SOLDERING STATION
Features Of Adjustable Temperature Digital Soldering Rework Station YH937D:
- Extremely low noise
- ESD design of soldering iron to protect sensitive components
- LED display to show precision real temperature
- Ventilations on the sides for heat radiation
- Quick warm-up and stabilized temperature
- Agile and light handle suitable for comfortable long time use
- Plastic Stand for keeping the iron from flammable materials
- Dampened sponge to wipe the soldering tips at times
- Free 5 Tips for more convenience operation
- Lightweight and space-saving
- Suitable for mounting and reworking SMD components by hand
SKU: n/a
Related products
-
-
Function Generators
UTG2025A Function/Arbitrary Waveform Generator
1. 1μHz full-band resolution
2. 5MHz~30MHz pulse waveform, adjustable rise/fall time3. 14-bit/16-bit vertical resolution4. Two equivalent-performance channels5. Max arbitrary waveform length of 8k/16M points; 48/1616. non-volatile waveforms storageSKU: n/a -
-
Function Generators
UTG9005C-II Function/Arbitrary Waveform Generato
1. Output waveforms: Sine, square, ramp, pulse, noise, DC, arbitrary
2. Output frequency range: Sine/square, 5MHz3. High-accuracy, broad-band 6 bit frequency counter, range: 100mHz~100MHz4. 4W power output5. EBTN LCD screenSKU: n/a
There are no reviews yet.