-8%

UT681HDMI Cable Tester

Availability:

20 in stock


1. Tests HDMI/MINI-HDMI cables

2. Fastline collocation type: A with A, A with C and C with C

3. Checks circuit breakage, short circuit, cross circuit and the missing wire

4. 20 visible LED indicators

5. Can toggle between scan and full display test modes

6. Single key operation

7. Manual/auto power off (after 10-minute inactivity)

8. Low battery indication

9. CE certification

10. Power supplied by 9V layer-built battery

5,100 5,539

20 in stock

Compare

1. Tests HDMI/MINI-HDMI cables

2. Fastline collocation type: A with A, A with C and C with C

3. Checks circuit breakage, short circuit, cross circuit and the missing wire

4. 20 visible LED indicators

5. Can toggle between scan and full display test modes

6. Single key operation

7. Manual/auto power off (after 10-minute inactivity)

8. Low battery indication

9. CE certification

10. Power supplied by 9V layer-built battery

Weight 0.2 kg
Dimensions 10 × 6 × 3 cm
Item Function Model Description
 UT681HDMI
Test function To test for:

HDMI/MINI-HDMI

Scan test mode LED1~LED19,    LED_S
Full display test mode LED1~LED19,    LED_S
To test for the case of short circuit,    crossover, open circuit, etc.
Ethernet cable: shielded/ unshielded test
Manual shutdown function
Auto shutdown function No operation within 10 minutes, the device will shut down automatically
Single key operation
Power supply: 9V battery
 Low voltage detection About less than 7.2V
Application  environment Working temperature: 0~40℃
Storage temperature: -10~50℃
Working humidity : 20~80% RH
Storage humidity : 10~90% RH
Altitude: ≤2000 meters
Safety standard CE EN61326-1: 2013; EN61326-2-2: 2013

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT681HDMI Cable Tester”

There are no reviews yet.

  • UT 205A+

    0 out of 5
    (0)
    1. 1000A AC current measurement
    2. 1000V AC/DC voltage measurement
    3. 600A inrush current measurement (UT206A+)
    4. Temperature  (UT206A+)
    5. NCV (UT206A+)
    6. ACV frequency 10Hz~10kHz
    7. Jaw opening: 45mm
    8. Resistance / capacitance / frequency measurement
    9. Auto range / backlight / low battery indication
    10. Continuity / diode / duty cycle
    11. MAX/MIN
    12. Data hold / flashlight / relative mode
    13. Auto power off
    14. CAT II 1000V/CAT III 600V
    SKU: n/a
  • UT39C+ Digital Multimeter

    0 out of 5
    (0)

    1. 1000V DC voltage measurement

    2. 750V AC voltage measurement
    3. 10A DC/AC current measurement
    4. Resistance/Capacitance
    5. hFE
    6. Diode/Continuity test
    SKU: n/a
  • UT60BT

    0 out of 5
    (0)

    Features of UT60 Series Digital Multimeters

    Certificates: CE, UKCA, cETLus

    ● 9999 counts
    ● True RMS
    ● Bluetooth
    ● Duty cycle
    ● Diode/Continuity test
    ● Temperature

    ● Non-contact voltage
    ● Analog bar/Data hold
    ● Backlight/Relative mode
    ● Auto/Manual range
    ● Low battery indication
    ● Three-color LED light indicator

    Video for UT60EU:

    Video for UT60S:

    SKU: n/a
  • CLAMP METER AC DC ET 8203

    0 out of 5
    (0)

    Descriptions:
    1.This is a 5999 counts automatic digital clamp multimeter,small and compact design for easy carrying.
    2.Stable performance,high precision,high reliability,clear reading and overload protection.
    3.It is a ideal tool and instrument,laboratory,factory,radio enthusiasts and The ideal tool for the family.

    Specifications:
    Brand:WINAPEX
    Model: 8203
    Color:Black
    Jaw:40mm
    Maximum display:5999
    DC Voltage: 6V/60V/600V/1000V
    AC Voltage: 6V/60V/600V/750V
    AC Current: 60A/600A
    DC Current: 60A/600A
    Resistance(ohm):600Ω/6KΩ/60Ω/600KΩ/6MΩ/40MΩ
    Capacitance:60nF/600nF/6uF/60uF/600uF/6mF/30mF
    Frequency:10Hz/100Hz/1kHz/10Hz/100Hz/1MHz/10MHz
    Temperature:(-20-1000 )℃/(0-1832 )℉
    DC voltage DCV :yes
    AC voltage ACV :yes
    AC current ACA :yes
    DC current DCA :yes
    T-RMS:yes
    NCV:yes
    Square wave output:yes
    On-Off Test :yes
    Diode measurement:yes
    Buzzer:yes
    Zero line / Fire line test :yes
    Data hold:yes
    Material: Plastic, Electronic Parts
    Battery: 2 x 1.5V AAA Batteries (not included)
    Product size:176x67x33mm/6.86×2.61×1.29in
    Product weight:305g/10.68oz

    Package information:
    Package weight:350g/12.25oz
    Package size:210x80x35mm/8.19×3.12×1.37in
    General Box Package

    Package included:
    1 x Clamp Meter
    1 x Pair of test leads
    1 x Thermocouple
    1 x User Manual

    Noted:
    1.Cannot measure,there is no current through the ground wire,can only be measured as a single wire or zero Iine.
    2.Cannot measure two or more lines at the same time.
    3.A line contains two or more than two wire core can not be measured.

    SKU: n/a
  • CLAMP METER AC BM 5266

    0 out of 5
    (0)
    Features:
    
    1. 1999 Counts and All-In-One: It can display 1999 counts and measure ac/dc voltage, ac current, resistance, capacitance, phase, diode and continuity tests.
    
    2. Clear to Read: With large LCD display and data hold function, easy to read and record data.
    
    3. Wide Application Range: It is a perfect tool for laboratory, factory, home and other fields.
    
    4. Easy to Read: With large LCD display and data hold function, easy to read and record data.
    
    5. More advantages: data retention, low battery indication, auto power off and auto negative indication.
    
    Description:
    
    1. This BM5266 is a portable digital clamp meter, high reliability, high accuracy and portability, a perfect tool for laboratory, factory, home and other fields.
    
    2. Can measure ac/dc voltage, ac current, resistance, capacitance, phase, diode and continuity tests.
    
    3. More advantages such as data retention, low battery indication, auto power off and auto negative indication.
    
    Specifications:
    
    Model Number: bm5266
    
    Display: 1999 counts
    
    Low battery indication: yes
    
    Automatic negative indication: yes
    
    Continuity test: yes
    
    DC voltage: 600v ±(0.5% 5)
    
    AC current: 2a/20a/600a ±(1.9% 10)
    
    Capacitance: 200uf ±(3.0% 5)
    
    Product Size: 195x63x34mm
    
    Color: gray and red
    
    Data retention: yes
    
    Auto power off: yes
    
    Diode test: yes
    
    Phase test: yes
    
    AC voltage: 600v ±(1.2% 5)
    
    Resistance: 2000unf/2mψ ±(0.8% 5)
    
    Power supply: 9v 6f22 battery (not included)
    
    Product weight: 183g
    
    package information:
    
    Package Size: 20.5x9.5x4cm / 8.1x3.7x1.6in.
    
    Package weight: 290g / 10.7oz
    
    Package list:
    
    1 x bm5266 digital cuff gauge
    
    2 x test pen cable
    
    1x User Manual
    
    
    SKU: n/a