-14%

YH 1502D+ DC POWER SUPPLY


Parameters
Rated voltage AC220V±10%  50Hz
Operating environment 0~40℃  relative humidity<80%
Storage temperature -20~80℃  relative humidity<80%
Dimensions of the machine body 27*14*22cm
Weight 1.9KG
Performance parameters
Output voltage Adjustable continuously within 0~15V
Output current Adjustable continuously within 0~2A (current limitation adjustment when above 0.2A)
Output power 15W
Source effect ≤1mV
Load effect ≤0.33%
Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms
Display accuracy 0.1V/0.1A/1mA
Protection mode Over-current, short circuit, over-temperature protection
Dissipation mode Air cooling

6,000 7,013

Compare

1. High accuracy and reliability

 

2. Short circuit protection and automatic recovery function

 

3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.

Category:
Weight 1.9 kg
Dimensions 27 × 14 × 22 cm

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YH 1502D+ DC POWER SUPPLY”

There are no reviews yet.

  • YH 938D SMD STATION

    0 out of 5
    (0)

    1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.

    2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.

    3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.

    4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
    5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.

    SKU: n/a
  • YH 939BD+ SOLDERING STATION

    0 out of 5
    (0)
    MODEL 939BD+
    RATED VOLTAGE AC 220V±10%  50Hz
    OUTPUT POWER 75W
    Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10%
    Withstand voltage and insulation tests AC1500V 0.4A 60S
    Operating Environment 0~40℃  relative humidity<80%
    Storage environment -20~80℃  relative humidity<80%
    Body size 14.5*12*8CM
    Weight 2.17KG
    Work voltage AC 26V±10%  50Hz
    Temperature range 200℃~480℃
    Temperature Stability ±1℃(Static)
    Display Mode Red LED Digital Display
    Calibration Mode PID Digitally Programmed Calibration
    PID Temperature Calibration Cycle 100MS
    Heating Core Imported High-Powered Heating Core
    Tip-to-Ground Impedance <2Ω
    Tip-to-Ground Voltage <2mV
    SKU: n/a
  • LM 570R-I Laser Level Meter

    0 out of 5
    (0)

    Features of LM570R-I Laser Level

    Certificates: CE, RoHS

    ● Working distance (Line): 15m-30m

    ● Operating time: >12h (All lasers on)

    ● Tripod mounting hole

    ● Laser class: Class 2

    ● Light source: 10mW

    ● Laser wavelength: 635nm

    SKU: n/a
  • UT 683KIT Wire Tracer

    0 out of 5
    (0)
    Description
    Certificates CE, RoHS
    Transmitter
    Port flashing
    Wire tracking
    Line alignment
    Open-short test 10kΩ
    Polarity test
    Operating time >8 hours
    Receiver
    Wire tracking RJ11>3000m; RJ45>100m
    NCV function
    Headset jack 3.5mm
    Low battery indication
    Operating time >5 hours
    GENERAL CHARACTERISTICS
    Power 1050mAh rechargeable lithium battery
    Product net weight Transmitter: around 95g; Receiver: around 127g
    Product size Transmitter-130mm x 51mm x 28mm; Receiver-197mm x 48mm x 34mm
    Standard accessories USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual
    Standard individual packing Gift box, carrying bag
    Standard quantity per carton 20pcs
    Standard carton measurement 480mm x 370mm x 325mm
    Standard carton gross weight About 10kg
    SKU: n/a
  • YH 947-VII Soldering Iron

    0 out of 5
    (0)

    1.Small size, light weight, easy to carry.

    2.Use the internal heating type heating core, high efficiency.

    3.947VII temperature adjustable.

    4.947VII with a power switch, when the appliance is not in use, you can turn off the

    switch, safe and energy saving.

    5.The internal use SMT double-sided board manufacturing process, the process is neat

    and the solder joint is firm.

    6.The handle uses completely new environmental protection material, safe and durable.

    SKU: n/a
  • YH 853D+5A ALL IN ONE REWORK STATION

    0 out of 5
    (0)

    1. The power supply is high-precision DC power supply with Constant Voltage and Current, output voltage:0-30V DC adjustable, output current :0-5A adjustable, Power supply with overload protection, high accuracy, reliability, designed for scientific research, product development, laboratories, schools, portable computer repair, electronics production lines etc.

    2. Enhanced safety features. Full intelligence self-detection functions on air gun and iron to provide safe operation mode.

    3. The air gun automatically enters standby when the temperature is less than 70oC thresho.

    4. With short circuit, open circuit, over-temp and over-load protection.

    5. Automatic cooling function for effectively prolonging the heater’s life and protecting the hot air gun.

    SKU: n/a