-14%

YH 1502D+ DC POWER SUPPLY


Parameters
Rated voltage AC220V±10%  50Hz
Operating environment 0~40℃  relative humidity<80%
Storage temperature -20~80℃  relative humidity<80%
Dimensions of the machine body 27*14*22cm
Weight 1.9KG
Performance parameters
Output voltage Adjustable continuously within 0~15V
Output current Adjustable continuously within 0~2A (current limitation adjustment when above 0.2A)
Output power 15W
Source effect ≤1mV
Load effect ≤0.33%
Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms
Display accuracy 0.1V/0.1A/1mA
Protection mode Over-current, short circuit, over-temperature protection
Dissipation mode Air cooling

6,000 7,013

Compare

1. High accuracy and reliability

 

2. Short circuit protection and automatic recovery function

 

3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.

Category:
Weight 1.9 kg
Dimensions 27 × 14 × 22 cm

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YH 1502D+ DC POWER SUPPLY”

There are no reviews yet.

  • Wire-Stripper

    0 out of 5
    (0)
    • Easy To Handle Tool
    • Reliability
    • Durable
    SKU: n/a
  • UTi 120T Thermal Imager

    0 out of 5
    (0)

    Advantages of thermal imager detection:

    1. Intuitive, efficient and convenient, making users directly “see” the temperature variation.

    2. Thermal condition of different locations for comprehensive analysis, providing more information for judgment

    3. Avoiding judgment errors, reducing labor costs, and discovering poor heat dissipation and hidden trouble points

    4. PC software for data analysis and report output

    SKU: n/a
  • UT18D Voltage and Continuity Tester

    0 out of 5
    (0)

    1. Auto power off, the conductor to be measured is greater than 12V

    2. Phase rotation test
    3. Continuity test with buzzer and LED indication
    4. Low battery indication and over voltage prompt
    5. Flashlight
    6. Test live voltage without batteries
    7. Buzzer and silent modes available
    8. Auto range
    9. Polarity indication
    SKU: n/a
  • UPO 2104E Ultra Phosphor Oscilloscope

    0 out of 5
    (0)
    Specifications
    Model UPO2104E
    Bandwidth 100MHz
    Channels 4
    Sampling rate 1GS/s
    Memory depth 56Mpts (single channel)
    Waveform capture rate 83,000wfms/s
    Time base scale (s/div) 5ns/div~50s/div
    Input impedance (1MΩ±2%) II (20pF±3pF)
    Vertical scale (V/div) 1mV/div~20V/div (1MΩ)
    Waveform record 65,000 Frames
    Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code
    Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced
    Auto measurements  Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A  (Rising edge), Delay B->A (Falling edge).
    Number of measurements Display 5 measurements at the same time
    Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements
    Frequency counter Hardware 6 bits counter (Channels are selectable)
    Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail)
    General Characteristics
    Power 100V~240VAC, 50Hz/60Hz
    Display 8 inches TFT color LCD Display with WVGA (800×480) resolution
    Product color White and grey
    Product net weight 3.5kg
    Product size 336mm×164mm×108mm
    Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable
    Standard individual packing Carton box
    Standard quantity per carton 2pcs
    Standard carton measurement 450mm×420mm×280mm
    Standard carton gross weight 9.7kg
    SKU: n/a
  • LM 570R-I Laser Level Meter

    0 out of 5
    (0)

    Features of LM570R-I Laser Level

    Certificates: CE, RoHS

    ● Working distance (Line): 15m-30m

    ● Operating time: >12h (All lasers on)

    ● Tripod mounting hole

    ● Laser class: Class 2

    ● Light source: 10mW

    ● Laser wavelength: 635nm

    SKU: n/a
  • UTP1310 Switching DC Power Supply

    0 out of 5
    (0)
    Specifications
    Model UTP1310
    Output voltage 0~32V
    Output current 0~10A
    Output power 320W
    Load regulation CV<0.1%+5mV
    CC<0.2%+3mA
    Power regulation CV<0.01%+5mV
    CC<0.2%+3mA
    Output regulate resolution CV: 10mV (typical), CC: 1mA (typical)
    MTBF(e): ≥2000hrs
    Programming accuracy
    (25℃±5℃)
    Voltage <0.1%+1digit
    Current <0.2%+3mA
    Ripple and noise
    (20Hz~20MHz)
    Voltage ≤10mVrms
    Current ≤5mArms
    Display mode LED voltage and current dual display
    General Characteristics
    Power Input voltage: 110V AC/220V AC, 50Hz~60Hz
    Display EBTN LCD
    Product color White and grey
    Product size (W×H×D) 80mm x 150mm x 230mm
    Product net weight 2.5kg
    SKU: n/a