-13%

YH-305D DC Power Supply


  • Model: YH-305D
  • Compact Design
  • All Metal Construction
  • Dual LED Three Digital Tube Display
  • Current mA / A Conversion Display
  • High Stabilized Output Voltage
  • Short Circuit Protection
  • Over Loading and Current Protection
  • CE Approved

13,000 14,936

Compare

YIHUA 305D  DC power supply

1.This model has compact design with all metal construction.

2.This unit now features a Dual LED three digital tube

  1. Display with highly accurate LED digital readout.

4.Maximum output is 30V at 5A.

  1. High stabilized output voltage.
  2. Current mA / A conversion display.

7.Short circuit protection.

8.Over loading and current protection.

9.CE Approved

Category:
Weight 4 kg
Dimensions 13 × 25 × 15 cm

Operating Conditions

Supply power: AC 220-240V, 50Hz/60Hz.

Working Temperature: -10°C ~ 40 °C

Relative Humidity: ‹ 90%

Storage Conditions: -10°C ~ 40 °C

Relative Humidity: ‹ 80%

Stable Voltage

The output voltage is between 0 and nominal value continuously adjustable

Voltage Stability: ≤0.01% +2mV

Load Stability: ≤ 0.01% +2mV

Recovery Time: ≤100µS

Ripple Noise: ≤1 MVRMS(RMS)

Temperature Coefficient: ≤ 200PPM/°C

Stable Current

The output current is between 0 and nominal value continuously adjustable

Power Stability: 0.1% + 3mA

Load Stability: 0.2% + 3mA

Ripple Noise : ≤2mArms(RMS)

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YH-305D DC Power Supply”

There are no reviews yet.

  • UT620 Series Digital Micro Ohm Meters

    0 out of 5
    (0)

    UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.

    SKU: UN62B0TUOM
  • UT383S Digital Light Meter

    0 out of 5
    (0)

    1. Split probe

    2. Sampling time: 0.5s
    3. Auto range
    4. Lux/Fc selectable
    5. Max/Min
    6. Overload indication (LO/HI)
    7. Data hold
    8. Backlight
    9. Auto power off
    10. Low battery indication
    SKU: n/a
  • RF-50M

    0 out of 5
    (0)

    Rf4 Video Camera Display Integrated Monocular 7-50x Zoom C-mount Lens Microscope With Multimeter Functional Microscope

    SKU: n/a
  • CLAMP METER AC DC CM 2056

    0 out of 5
    (0)

    Technical data

    Basic function

    Range

    Accuracy

    DCV

    400mV/4V/40V/400V/1000V

    ±(0.5%+5)

    ACV

    400mV/4V/40V/400V/750V

    ±(1.0%+5)

    DCA

    400A/1000A

    ±(2.0%+5)

    ACA

    400A/1000A

    ±(2.0%+5)

    Resistance

    400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ

    ±(0.8%+3)

    Capacitance

    4nF/40nF/400nF/4uF/40uF/200uF

    ±(3.5%+8)

    Frequency

    100Hz/1kHz/10kHz/100kHz/1MHz/10MHz

    ±(0.5%+4)

    Temperature

    (-40~ 1000) ℃ / (-40 ~1832) ℉

    ±(1.0%+5)

    Special function

    CM-2056

    NCV test

    True RMS test

    Diode test

    Continuity test

    Less than 50Ω±10Ω

    Low battery indicator

    Approx. less than 2.4 V

    Data hold

    Auto power off

    About 15 minutes

    Function protection

    Clamp light

    Backlight display

    Input impedance

    10MΩ

    Sampling rate

    3 times/s

    AC frequency response

    Current 50-60Hz/ voltage 50-400Hz

    Operation method

    Auto or manual range

    Max display

    4000

    Clamp opens

    52mm

    Battery

    3V (2*AAA battery)

    General Characteristic

    Meter color

    Orange and Black

    Meter weight

    About 280g (including battery)

    Meter size

    270×123×50mm

    Standard accessory

    Test leads, battery, manual, TP01 temperature probe

    SKU: n/a
  • JM-8168 Precision Screwdriver Set Brand

    0 out of 5
    (0)

    Application:

    Cell phone/Tablet/Display/Camera/Laptop/Computer

    Feature:

    Bits are 12 mm depth,30% more working depth than regular bits

    S2 Material (HRC58~62)

    Surface: matte sand blasting

    Usage:

    T2:  for huawei, OPPO, xiaomi and VIVO
    5 star 0.8: for apple and VIVO
    5 star 1.2: for the new macbook

    Y0.8, motherboard +1.5: for new iphone 7 and above models

    SKU: n/a