YH 706 REWORK STATION
Out of stock
| Model | 706 | 872D+ |
| Power Consumption | 720W | 720W |
| Measurement | 124*187*157MM | 124*187*157MM |
| Weight | 4.5KG | 4.8KG |
| Working environment | 0~50°C | 0~50°C/0~122°F |
| Storage environment | -20-80°C | -20-80°C |
| Hot Air Reworks | ||
| Airflow type | dual-turbo blower | diaphragm pump spiral wind |
| Air Flow | ≤168L/min | ≤24L/min |
| Temperature Range | 100°C-480°C | 100°C-480°C |
| Temperature Stability | ±1°C | ±1°C |
| Display Type | Digital Display | Digital Display |
| Handle length | ≥90CM | ≥90CM |
| Soldering Iron | ||
| Temperature Range | 200°C-480°C | 200°C-480°C |
| Temperature Stability | ±2°C | ±2°C |
| Tip of ground voltage | <2mv<> | <2mv<> |
| Tip ground impedance | <2 ohm | <2 ohm |
| Display Type | Digital Display | Digital Display |
| Handle length | ≥100CM | ≥100CM |
₨13,080 ₨16,658
Out of stock
Compare1.The air gun features manual/automatic work mode conversion Manual mode: air gun back into the handle frame, air gun to maintain the current state of the work, the manual mode is suitable for frequent use of air guns, eliminating the need for back and forth to cool the warming process, convenient. Automatic mode: air gun back into the handle frame, air gun automatic cooling to standby, automatic mode for infrequently used air gun to save energy and reduce wear and tear on the machine, to extend the life of the machine
2.The machine has °C/°F temperature conversion function ,meet different market need to design the temperature display mode, according to the custom to choose.
| Weight | 4.5 kg |
|---|---|
| Dimensions | 12 × 19 × 16 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 706 REWORK STATION”
-
Rework & Soldering Station
YH 899D-II REWORK STATION
PARAMETERSPower consumption 720W Gun Temperature range 100-480°C Gun heater material Ferro-alloys Gun heater resistance 74Ω Gun type Brushless Fan air flow 120L/min Soldering Iron Temperature range 200-480°C soldering Iron Type Blue Handle Soldering Iron Heater material Imported high-power heater Soldering Iron heater power 60W Gross weight 3.3KG/pcs Inner box Dimension(cm) 29*20*18 Outer box Dimension(cm) 59.5*41*36 QTY 8PCS PER outer carton SKU: n/a -
-
SMD Tester
UT 116C SMD Tester
Specifications Model UT116C Display count 6000 Resistance 60MΩ Capacitance 100mF Diode test 3.2V LED/stabilivolt About 21V/1mA Continuity Test ＜50Ω Battery test Load current ≈ 10mA Auto range √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery . SKU: n/a -
Spectrum Analyzer
UTS 3030D SPECTRUM ANALYZER
UTS 3000 series high sensitivity spectrum analyzer are equipped with full aluminum case. Users can select many application, such as remote control, integrated system and education presentation with USB/LAN/VGA/GPIB/RS232 interface and standard SCPI instructions. Frequency AM/FM demodulation, adjacent channel power and chromatogram are measuring parameters.
SKU: n/a -
Infrared Thermometer
UT 305R Infrared Thermometer
Instantaneous measurementHigh measurement accuracy ±0.3ºCMeasurement range 32ºC ~ 43ºCContactless measurementSound notification and LED color change based on temperature measurementAdditional LightAutonomous battery systemPossibility of tripod mountingSKU: n/a
Related products
-
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
SKU: n/a -
Rework & Soldering Station
YH 939BD+ SOLDERING STATION
MODEL 939BD+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a
There are no reviews yet.