YH 706 REWORK STATION
Out of stock
| Model | 706 | 872D+ |
| Power Consumption | 720W | 720W |
| Measurement | 124*187*157MM | 124*187*157MM |
| Weight | 4.5KG | 4.8KG |
| Working environment | 0~50°C | 0~50°C/0~122°F |
| Storage environment | -20-80°C | -20-80°C |
| Hot Air Reworks | ||
| Airflow type | dual-turbo blower | diaphragm pump spiral wind |
| Air Flow | ≤168L/min | ≤24L/min |
| Temperature Range | 100°C-480°C | 100°C-480°C |
| Temperature Stability | ±1°C | ±1°C |
| Display Type | Digital Display | Digital Display |
| Handle length | ≥90CM | ≥90CM |
| Soldering Iron | ||
| Temperature Range | 200°C-480°C | 200°C-480°C |
| Temperature Stability | ±2°C | ±2°C |
| Tip of ground voltage | <2mv<> | <2mv<> |
| Tip ground impedance | <2 ohm | <2 ohm |
| Display Type | Digital Display | Digital Display |
| Handle length | ≥100CM | ≥100CM |
₨13,080 ₨16,658
Out of stock
Compare1.The air gun features manual/automatic work mode conversion Manual mode: air gun back into the handle frame, air gun to maintain the current state of the work, the manual mode is suitable for frequent use of air guns, eliminating the need for back and forth to cool the warming process, convenient. Automatic mode: air gun back into the handle frame, air gun automatic cooling to standby, automatic mode for infrequently used air gun to save energy and reduce wear and tear on the machine, to extend the life of the machine
2.The machine has °C/°F temperature conversion function ,meet different market need to design the temperature display mode, according to the custom to choose.
| Weight | 4.5 kg |
|---|---|
| Dimensions | 12 × 19 × 16 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 706 REWORK STATION”
-
SMD Tester
UT 116C SMD Tester
Specifications Model UT116C Display count 6000 Resistance 60MΩ Capacitance 100mF Diode test 3.2V LED/stabilivolt About 21V/1mA Continuity Test ＜50Ω Battery test Load current ≈ 10mA Auto range √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery . SKU: n/a -
Digital Earth Meter
UT 522 Digital Earth Tester
Specifications Range UT522 Earth resistance (Ω) 0~40Ω ±(2%+20) 0~400Ω ±(2%+3) 0~4000Ω ±(2%+3) AC earth voltage (V) 0~400V ±(1%+6) Frequency: 50Hz/60Hz √ Features Display count 4000 Manual range √ Auto power off Around 10 minutes √ Low battery indication √ Data hold √ Data storage 20 LCD backlight √ Full icon display √ Double insulation protection √ Poor contact display “…Ω” √ Over-range display Display “OL” √ Simple 2-wire testing √ Precise 3-wire testing √ General Characterisitics Power 1.5V battery (LR6) x 6 Display 70.6mm x 34mm Product color Red and grey Product net weight 560g Product size 160mm x 100mm x 70.5mm Standard accessories Batteries, simple test leads with alligator clips, standard test leads with alligator clips, earth spike, gallus Standard individual packing Gift box, carrying bag, English manual Standard quantity per carton 8pcs Standard carton measurement 530mm x 300mm x 350mm (0.056 CBM per standard carton) Standard carton gross weight 19kg SKU: n/a -
Wire Tracker
UT 683KIT Wire Tracer
Description Certificates CE, RoHS Transmitter Port flashing √ Wire tracking √ Line alignment √ Open-short test 10kΩ Polarity test √ Operating time ＞8 hours Receiver Wire tracking RJ11＞3000m; RJ45＞100m NCV function √ Headset jack 3.5mm Low battery indication √ Operating time ＞5 hours GENERAL CHARACTERISTICS Power 1050mAh rechargeable lithium battery Product net weight Transmitter: around 95g; Receiver: around 127g Product size Transmitter-130mm x 51mm x 28mm; Receiver-197mm x 48mm x 34mm Standard accessories USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual Standard individual packing Gift box, carrying bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 325mm Standard carton gross weight About 10kg SKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a
Related products
-
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Rework & Soldering Station
YH 853D 5A-II ALL IN 1 REWORK STATION
A multi-station that fully integrates 3 professional stations that satisfy a broad range of soldering, reworking, and testing applications. Professional all-round performance and user experience for flexible applications. Advanced technologies, including precision temperature stabilization, temperature calibration, sleep mode, zero-airflow protection, automatic shut-down, and more
SKU: n/a -
Rework & Soldering Station
YH 939BD+ SOLDERING STATION
MODEL 939BD+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Rework & Soldering Station
YH 948D Soldering Iron
YH 948D adopts PID programmable temperature control technology with an implantable highest-precision PID program for high-speed tracking and detection of the actual desoldering gun and soldering iron temperatures with real-time temperature correction. Yihua Desoldering Station comes in 3 in 1 design that Combines real 90W High Frequency and High Power Soldering, 130W High-Frequency Desoldering , and Vacuum Pick Up functions in a compact body..
Features Of YIHUA 948D 130W High-frequency Desoldering Station:
- Adopts PID programmable temperature control technology
- Equipped with a suction pen to help remove IC.
- The anti-static design prevents electrostatic component damage or leakage.
- Adopts an isolation transformer for power supply to heating elements and automatic shutoff functionality when the high-frequency soldering iron handle or desoldering gun handle is removed for safety and reliability.
- A portable built-in vacuum with strong suction does away with external vacuum systems.
SKU: n/a
There are no reviews yet.