YH 852 (BRUSHLESS FAN) Rework Station
Out of stock
| Machine parameter | |||
| Rated voltage | AC 220V±10% 50Hz | ||
| Machine power | 700W±10％（MAX） | ||
| working environment | 0～40℃ relative humidity ＜80％ | ||
| Storage temperature | －20～80℃ relative humidity ＜80％ | ||
| Machine size | 25.5*18.8*12.5cm | ||
| weight | 3.55KG | ||
| Part of performance parameters | Hot air gun | Soldering iron | |
| Working voltage | AC 220V±10% 50Hz | AC 26V±10% 50Hz | |
| Output power | 650W | 60W | |
| temperature range | 100℃～500℃ | 200℃～500℃ | |
| Mode of airflow | brushless fan | — | |
| airflow | 120L/min(max) | — | |
| Temperature stability | ±15℃ （static） | ±10℃ （static） | |
| Display | two LED (red/green) | — | |
| heater | Heating core ceramics heater | common heater | |
| Tips to ground impedance | — | ＜2Ω | |
| Tips voltage to ground | — | ＜2mV | |
₨8,159 ₨8,555
Out of stock
CompareCommon features of the handle of the brushless fan type hot air gun:
(a) The brushless-motor fan for the hot air gun has a standard service life of 20000 hours. The airflow is soft, uniform and heavy.
(b) The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
(c) The outlet steel cylinder of the handle and the hot air gun nozzle are made of superior stainless steel with better conductivity and strong oxidation resistance;
| Weight | 3.5 kg |
|---|---|
| Dimensions | 25 × 19 × 12 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 852 (BRUSHLESS FAN) Rework Station”
-
Multimeters
YX 960 Analog Multimeter
- Excellent DC resolution factor of 2mV
- Expended resistance measurement of 20 to200M
- Series capacitor DC to enable measurement of only AC components
- A large and bright meter with a scale length of 80mm
- The sensitivity of 44pA at full scale
- Fuse and Diode protection
- Measure HFE of transistor directly
SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
DC Power Supplies
YH 1502DD DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 15W Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 17*21*16.5cm Weight 1.61KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection SKU: n/a -
Wire & Cable Testers
UTP 04 100MHZ PROBE
Features Of UNI-T Best Passive Probe 100MHz UTP04:
This passive probe is good oscilloscope accessories, it is suitable for oscilloscope.
Stable performance and not easy to break.
This can provide a professional and accurate measurement.
Widely used, it can satisfy most peoples.
A good helper for instrument engineer.
SKU: n/a
Related products
-
-
Rework & Soldering Station
YH 948D Soldering Iron
YH 948D adopts PID programmable temperature control technology with an implantable highest-precision PID program for high-speed tracking and detection of the actual desoldering gun and soldering iron temperatures with real-time temperature correction. Yihua Desoldering Station comes in 3 in 1 design that Combines real 90W High Frequency and High Power Soldering, 130W High-Frequency Desoldering , and Vacuum Pick Up functions in a compact body..
Features Of YIHUA 948D 130W High-frequency Desoldering Station:
- Adopts PID programmable temperature control technology
- Equipped with a suction pen to help remove IC.
- The anti-static design prevents electrostatic component damage or leakage.
- Adopts an isolation transformer for power supply to heating elements and automatic shutoff functionality when the high-frequency soldering iron handle or desoldering gun handle is removed for safety and reliability.
- A portable built-in vacuum with strong suction does away with external vacuum systems.
SKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a
There are no reviews yet.