-
×
UTP 04 100MHZ PROBE
- Vendor:
Subtotal: ₨3,532
-8%
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
|
Iron parts |
Gun parts |
DC power supply partsA |
|
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
|
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
|
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
|
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
|
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
| Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
| Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
| Iron handle:Black handle |
Protection starting current:>standard value 10% |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Clamp Meters
UT 205E 1000A True RMS Digital Clamp Meter
Specifications Range UT205E AC current (A) 1000A ±(2%+5) AC current frequency response 50Hz~60Hz AC voltage (V) 6V ±(1.2%+3) 60V/600V/1000V ±(1%+8) DC voltage (V) 600mV ±(0.8%+3) 6V/60V ±(0.5%+5) 600V ±(0.5%+5) 1000V ±(0.5%+5) AC voltage frequency response 40Hz~400Hz Resistance (Ω) 600Ω ±(1%+3) 6KΩ/60KΩ/600KΩ ±(1%+2) 6MΩ/60MΩ ±(2%+8) Capacitance (F) 60nF ±(4%+25) 600nF/6μF/60μF/600μF ±(4%+5) 6mF/60mF ±(10%+9) Low voltage frequency (Hz) 10Hz~1MHz ±(0.1%+3) Duty cycle (%) 10%~90% ±(2.6%+7) Features Display count 6000 Jaw opening 42mm Current frequency 50Hz~60Hz High voltage frequency 40Hz~400Hz Auto power off √ Continuity test √ Auto/Manual range √ Low battery indication √ Diode test √ Relative mode/Data hold √ MAX/MIN √ Function selection √ Flashlight √ Wake-up function √ Auto power off current: ＜50μA √ Input impedance (ACV/DCV) ≥10MΩ √ General Characteristics Power 1.5V battery (R03) x 3 Display 43mm x 45mm Product color Red and grey Product net weight 465g Product size 272mm x 81mm x 43.5mm Standard accessories Test leads, batteries, point contact temperature probe Standard individual packing Gift box, carrying bag, English manual Standard quantity per carton 10pcs Standard carton measurement 355mm x 330mm x 315mm Standard carton gross weight About 7.1kg SKU: n/a -
Laser Distance Meters
LM 50 Laser Distance Meter
Specifications LM50 Display type EBTN Display size 2.0-inches Range 50m Min. display unit 0.001m Measurement units m/ft/in Measurement basis front/rear Accuracy ±(2mm+5 x 10-5D) Laser class 2 Laser type 630~670nm, ﹤1mW Features Single measurement √ Continuous measurement √ Max/Min/Area √ Volume √ Pythagoras √ Add/Subtract √ Data storage 20 groups Auto power off 3 minutes without operation Auto laser off 30s without operation Auto backlight off 10s without operation Audio indication √ Battery status display √ Storage temperature -20℃~70℃ Operating temperature 0℃~40℃ SKU: n/a -
Rework & Soldering Station
YH 898BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W 300℃ Constant Temperature Power (High-Speed PID Programmed to
Energy Savings)
250W±10％ Operating Environment 0～40℃ Relative humidity＜80％ Storage temperature －20～80℃ Relative humidity＜80％ Dimensions 13.5*15*10cm weight 2.65KG SKU: n/a -
Rework & Soldering Station
YH 995D+ ADVANCE REWORK STATION
Model: YH-995D+
· Centigrade/Fahrenheit Programmable
· Temperature Compensation Programmable: -50 °C to +50 °C
· Manual / Automatic Programmable
· Cool Air / Hot Air Changeable
· Temperature Presettable
· Sleep Mode: 0-99 Minutes
· Samsung Dual Core Microcomputer Processor
· ESD Safe
· Total Power Consumption: 720 Watts
· Air Flow Type: Brushless Fan
· Max Air Flow Volume: 120L/min
· Hot Air Gun: 650 Watts
. Temperature Range 212° F ~ 896°F/100°C ~ 480°C with Auto Cool Down
· Hot Air Gun Temperature Stability: ±1.8°F/1.0°C
· Hot Air Gun Tube Material: 100% Silicone (Virtually No Memory)
· Soldering Iron: 65 Watts
. TemperatureRange 392°F ~ 896°F/200°C ~ 480°C
· Soldering Iron Temperature Stability: ±3.6°F/2.0°C
· Soldering Iron Cord Material: 100% Silicone (Virtually No Memory)
· Working Environment: 0°F ~ 122°F/ 0°C ~ 50°C
· Storage Environment: -68°F ~ 176°F/-20°C ~ 80°C
· Inner box Dimensions: 29*20*18cm
· Unit Weight: 3.2 KG
· QTY:8PCS/CTN
· Outer carton size:59.5*41*36cm
· G.W:25.6KG/CTNSKU: n/a -
Related products
-
-
Rework & Soldering Station
YH 938BD+ DUAL SMD STATION
MODEL 938BD+ Power consumption 135W Temperature Range 100°C~480°C/212°F~896°F Display type LCD Temperature stability ±2°C/3.6°F (static) Heater voltage AC 24V ±10% 50Hz Sleep Function 0-99 Minutes Temperature Compensation Programmable -50 °C to +50 °C Working Environment 0~40°C/32°F~104°F Storage Environment -20°C ~ 80°C/-4°F ~ 176°F Soldering Iron & Hot Tweezers Cord Material 100% Silicone (Virtually No Memory) SKU: n/a -
Rework & Soldering Station
YIHUA 9936 Portable Soldering Station
Standard accessory
Main unit 1set
Soldering iron handle (include iron tips and heater) 1pc
Iron holder 1pc
Clean sponge 1pc
Manual 1pc
Application Scope
- Production lines for electronic products ,
2. Repair industry for mobile phone.
3. SMD components requiring the highest precision
SKU: n/a - Production lines for electronic products ,
-
Rework & Soldering Station
YH 862BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W±10％（max） 300℃ Constant Temperature Power (High-Speed PID Programmed
to Energy Savings)
250W±10％ Operating Environment 0～40℃ Relative humidity＜80％ Storage temperature －20～80℃ Relative humidity＜80％ Dimensions 31.5*22*22cm weight 3.5KG Performance Parameter Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 75W temperature range 100℃～480℃ 200℃～480℃ Air Supply Mode Brushless-Motor Fan — airflow 120L/min(max) — Temperature stability ±2℃ （static） ±2℃ （static） Display Mode Red LED Digital Display Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration
PID Digitally Programmed Calibration
Temperature correction PID digital program proofreading
PID digital program proofreading
SKU: n/a
There are no reviews yet.