-
×
UT A61 Food Temperature Meter
- Vendor:
Subtotal: ₨3,180
-8%
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
|
Iron parts |
Gun parts |
DC power supply partsA |
|
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
|
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
|
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
|
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
|
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
| Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
| Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
| Iron handle:Black handle |
Protection starting current:>standard value 10% |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
DC Power Supplies
UTP1310 Switching DC Power Supply
Specifications Model UTP1310 Output voltage 0~32V Output current 0~10A Output power 320W Load regulation CV＜0.1%+5mV
CC＜0.2%+3mAPower regulation CV＜0.01%+5mV
CC＜0.2%+3mAOutput regulate resolution CV: 10mV (typical), CC: 1mA (typical) MTBF(e): ≥2000hrs Programming accuracy
(25℃±5℃)Voltage ＜0.1%+1digit Current ＜0.2%+3mA Ripple and noise
(20Hz~20MHz)Voltage ≤10mVrms Current ≤5mArms Display mode LED voltage and current dual display General Characteristics Power Input voltage: 110V AC/220V AC, 50Hz~60Hz Display EBTN LCD Product color White and grey Product size (W×H×D) 80mm x 150mm x 230mm Product net weight 2.5kg SKU: n/a -
Rework & Soldering Station
YH 995D+ ADVANCE REWORK STATION
Model: YH-995D+
· Centigrade/Fahrenheit Programmable
· Temperature Compensation Programmable: -50 °C to +50 °C
· Manual / Automatic Programmable
· Cool Air / Hot Air Changeable
· Temperature Presettable
· Sleep Mode: 0-99 Minutes
· Samsung Dual Core Microcomputer Processor
· ESD Safe
· Total Power Consumption: 720 Watts
· Air Flow Type: Brushless Fan
· Max Air Flow Volume: 120L/min
· Hot Air Gun: 650 Watts
. Temperature Range 212° F ~ 896°F/100°C ~ 480°C with Auto Cool Down
· Hot Air Gun Temperature Stability: ±1.8°F/1.0°C
· Hot Air Gun Tube Material: 100% Silicone (Virtually No Memory)
· Soldering Iron: 65 Watts
. TemperatureRange 392°F ~ 896°F/200°C ~ 480°C
· Soldering Iron Temperature Stability: ±3.6°F/2.0°C
· Soldering Iron Cord Material: 100% Silicone (Virtually No Memory)
· Working Environment: 0°F ~ 122°F/ 0°C ~ 50°C
· Storage Environment: -68°F ~ 176°F/-20°C ~ 80°C
· Inner box Dimensions: 29*20*18cm
· Unit Weight: 3.2 KG
· QTY:8PCS/CTN
· Outer carton size:59.5*41*36cm
· G.W:25.6KG/CTNSKU: n/a -
Tools and Hardware
JM X4 Magnetic Watch
Wristband design, easy and comfortable to use, doesn’t affect any movement.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Put components on the wristband anytime you want, prevent components from missing.
Strong magentic board is made of permanent magnet, strong magnetism, long service life and efficient adsorption.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Hook and loop strap design, easy and comfortable to wear.SKU: n/a -
Tool Kits
JM-6092A 57 in 1 Multi-Functional Screwdriver Hand Tool Set
- The tool box is manufacture from PP plastic, transparent and clear.
- Plastic design, strong resistance to fall, new pressure switch, strong and beautiful.
- The key position uses high quality CR-V material, the whole is durable: the extension pole that is equipp can solve a few narrow areas easily.
- The tool is equipp with strong magnetic anti-slide handle, which accords with the ergonomic appearance
- Double-side ball anti-slip design, with strong magnetic multi-angle lengthening bar, 9 knots are adjustable, make it easier to use .
- 57 Pcs in 1 Electronic bits Screwdriver Tools Kit Repair set
- Model: JM-6092A
- Package weight: 658g/1.45lb
- 32pcs- 6.35mm CR-V bits; v 20pcs- 4mm CR-V precision bits
- lpcs- 120mm PP&TPR plastic precision handle
- 1pcs- 125mm PP&TPR plastic non-slip handle
- 1pcs- 125mm Aluminum extension rod
- lpcs- 60mm Fine steel extension rod
- 1pcs- 130mm multi angle extension rod
SKU: n/a
Related products
-
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Rework & Soldering Station
YH 853D 5A-II ALL IN 1 REWORK STATION
A multi-station that fully integrates 3 professional stations that satisfy a broad range of soldering, reworking, and testing applications. Professional all-round performance and user experience for flexible applications. Advanced technologies, including precision temperature stabilization, temperature calibration, sleep mode, zero-airflow protection, automatic shut-down, and more
SKU: n/a -
Rework & Soldering Station
YIHUA 937D Repairing Soldering Iron
Standard Configuration
Main unit 1set
Soldering iron handle (include iron tips and heater) 1pc
Iron holder 1pc
High temperature resistant sponge 1pc
Manual 1pc
Power plug :1pc
Application Scope
Production lines for electronic products ,.
2. Repair industry for moblie phone.
3. SMD components requiring the highest precision.
SKU: n/a -
Rework & Soldering Station
YH 862BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W±10％（max） 300℃ Constant Temperature Power (High-Speed PID Programmed
to Energy Savings)
250W±10％ Operating Environment 0～40℃ Relative humidity＜80％ Storage temperature －20～80℃ Relative humidity＜80％ Dimensions 31.5*22*22cm weight 3.5KG Performance Parameter Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 75W temperature range 100℃～480℃ 200℃～480℃ Air Supply Mode Brushless-Motor Fan — airflow 120L/min(max) — Temperature stability ±2℃ （static） ±2℃ （static） Display Mode Red LED Digital Display Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration
PID Digitally Programmed Calibration
Temperature correction PID digital program proofreading
PID digital program proofreading
SKU: n/a
There are no reviews yet.