-
×
UT 89XE Digital Multimeter
- Vendor:
Subtotal: ₨13,200
-8%
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
|
Iron parts |
Gun parts |
DC power supply partsA |
|
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
|
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
|
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
|
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
|
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
| Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
| Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
| Iron handle:Black handle |
Protection starting current:>standard value 10% |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Voltage Detector
UT07A-EU Socket Tester
Specifications Model UT07A-EU Operating voltage 230V Operating current ＜18mA Operating frequency 50Hz~60Hz Indications OK, leakage test passed OK Missing earth Missing live Missing neutral Live earth reverse Live earth reverse and missing earth General Characteristics Product color Red and grey Product net weight 79g Product size 65mm x 65mm x 61mm Standard individual packing Blister, English manual Standard quantity per carton 48pcs Standard carton measurement 430mm x 330mm x 365mm (0.052 CBM per standard carton) Standard carton gross weight 5.8kg SKU: n/a -
Meter Leads
UT L25 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- If you want to change your multimeter test lead, this is a great choice.
- Double insulated wire.
- Removable tip.
SKU: n/a -
Wire & Cable Testers
UTP 03 60MHZ PROBE
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
SKU: n/a -
Thermal Imagers
UTi 120T Thermal Imager
Advantages of thermal imager detection:
1. Intuitive, efficient and convenient, making users directly “see” the temperature variation.
2. Thermal condition of different locations for comprehensive analysis, providing more information for judgment
3. Avoiding judgment errors, reducing labor costs, and discovering poor heat dissipation and hidden trouble points
4. PC software for data analysis and report output
SKU: n/a -
Clamp Meters
UT 207 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate 2. True RMS 3. Inrush current 4. Zeroing function 5. Full icon display 6. MAX/MIN 7. Data hold; Duty cycle 8. Auto power off and low battery indication 9. Diode; Continuity buzzer; Input Impedance for DCV
SKU: n/a -
Heat Gun
YH 850B HEAT GUN
Operating Voltage :AC 220V±10% 50Hz
Total Power:650W
Operating Environment 0～40℃
relative humidity ＜80％
Storage Temperature-20～80℃
relative humidity ＜80％
Dimensions :255*188*125mm
Weight:2.8KG
performance parameter 850B
Temperature Range :100℃～450℃
display mode —-
air supply mode :Brushless-Motor Fan
Airflow:120L/min(Max)
Temperature stability :±15℃ （static）
Heating Core: Ceramic Framed Heating Core
SKU: n/a
Related products
-
Rework & Soldering Station
YH 898BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W 300℃ Constant Temperature Power (High-Speed PID Programmed to
Energy Savings)
250W±10％ Operating Environment 0～40℃ Relative humidity＜80％ Storage temperature －20～80℃ Relative humidity＜80％ Dimensions 13.5*15*10cm weight 2.65KG SKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Rework & Soldering Station
YH 995D+ ADVANCE REWORK STATION
Model: YH-995D+
· Centigrade/Fahrenheit Programmable
· Temperature Compensation Programmable: -50 °C to +50 °C
· Manual / Automatic Programmable
· Cool Air / Hot Air Changeable
· Temperature Presettable
· Sleep Mode: 0-99 Minutes
· Samsung Dual Core Microcomputer Processor
· ESD Safe
· Total Power Consumption: 720 Watts
· Air Flow Type: Brushless Fan
· Max Air Flow Volume: 120L/min
· Hot Air Gun: 650 Watts
. Temperature Range 212° F ~ 896°F/100°C ~ 480°C with Auto Cool Down
· Hot Air Gun Temperature Stability: ±1.8°F/1.0°C
· Hot Air Gun Tube Material: 100% Silicone (Virtually No Memory)
· Soldering Iron: 65 Watts
. TemperatureRange 392°F ~ 896°F/200°C ~ 480°C
· Soldering Iron Temperature Stability: ±3.6°F/2.0°C
· Soldering Iron Cord Material: 100% Silicone (Virtually No Memory)
· Working Environment: 0°F ~ 122°F/ 0°C ~ 50°C
· Storage Environment: -68°F ~ 176°F/-20°C ~ 80°C
· Inner box Dimensions: 29*20*18cm
· Unit Weight: 3.2 KG
· QTY:8PCS/CTN
· Outer carton size:59.5*41*36cm
· G.W:25.6KG/CTNSKU: n/a
There are no reviews yet.