-8%

YH 853D 2A Rework Station All IN 1


  • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
  • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
  • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
  • 4). Hot air rework, soldering iron are equipped by variety of fault protection

20,400 22,111

Compare
  • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
  • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
  • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
  • 4). Hot air rework, soldering iron are equipped by variety of fault protection
Weight 4 kg
Dimensions 25 × 19 × 14 cm

Technical data:

Rated voltage:  AC 220V±10% 50HZ ( 110V±10% 50HZ)

Whole machine  Power Consumption:  ≤800W

Work environment:  0-50°C

 

 

Iron parts

 

Gun parts

 

DC power supply partsA

 

work Voltage :AC:26V±10% 50HZ

 

work Voltage:  AC:220V±10% 50HZ\( 110V±10% 50HZ)

 

work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ)

 

Output power:50W±10%

 

Output power:600W±10%

 

Output power:15W/30W

 

Temperature range:200°C-480°C

 

Temperature range:100°C-480°C

 

Output voltage:0-15V

 

Temperature stability:±2°C

 

Temperature stability:±2°C

Load stability:<0.01±2mv
 

Tip of ground impedance<2ohm

Gun type:Diaphragm pump

Airflow is focus on it,24L~28L/Min

 

recovery time:<100us

Tip of ground voltage: <2mV Gun heater resistance:90Ω  

Ripple dB<1mvrms (virtual value)

Iron Heater material: Common heater  

Gun heater material:Nickel-alloys

 

Temperature coefficient:<300PPm/°C

Iron handle:Black handle  

Protection starting current:>standard value 10%

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YH 853D 2A Rework Station All IN 1”

There are no reviews yet.

  • UT303A+ Infrared thermometer

    0 out of 5
    (0)
    Specifications UT303A+
    Temperature range -32℃~800℃
    -25.6℉~1472℉
    Accuracy ≥0℃: ±1.5℃ or ±1.5%; <0℃: ±(1.5℃+0.1℃/℃)
    ≥32℉: ±3.0℉ or ±1.5%; <32℉: ±(3.0℉+0.1℉/℉)
    Repeatability 0.7℃ or 0.7% (1.5℉ or 0.7%)
    D:S ratio 30:1
    Response time 250ms
    Emissivity 0.1~1.0 (adjustable, stores 5 sets of preset values)
    Spectral response 8um~14um
    Laser power < 1mW
    Features
    Auto power off
    Low battery indication
    LCD display Color EBTN
    High/low LED alarm
    High/low audible alarm
    Data hold/Lock measurement
    ℃/℉ selection
    MAX/MIN/AVG/DIFF mode
    Data storage with date and time
    Scheduled measurement
    Backlight
    Operating temperature 0℃~50℃ (32℉~122℉)
    Storage temperature  -20℃~60℃ (-4℉~140℉)
    Operating humidity <90%RH (non-condensing)
    Drop test 1m
    Tripod mounting hole
    General Characterisitics
    Power 9V battery
    Display 35mm x 35mm
    Product color Red and grey
    Product net weight 310g
    Product size 172mm x 113.5mm x 53mm
    Standard accessories Battery, carrying bag
    Standard individual packing Gift box, blister, English manual
    Standard quantity per carton 10pcs
    Standard carton measurement 425mm x 335mm x 365mm
    Standard carton gross weight 6.65kg
    SKU: n/a
  • YH 8509 HOT AIR STATION

    0 out of 5
    (0)
    Specification
    Temperature range 100ºC-480ºC
    Display mode LCD display
    Storage temperature -20~80 Celsius degree
    Operation temperature 0~40ºC
    Storage Humidity 35%~45%
    SKU: n/a
  • YH 908 HAND HELD SOLDERING STATION

    0 out of 5
    (0)
    Model 908
    Power 60W
    Voltage range AC 220V~240V,50Hz / AC 100V~125V,60Hz
    Weight 0.2kg/pc
    Working environment 0~40°C/32~104°F
    Storage environment -20~80°C/-4~176°F
    SKU: n/a
  • UT 205E 1000A True RMS Digital Clamp Meter

    0 out of 5
    (0)
    Specifications Range UT205E
    AC current (A) 1000A ±(2%+5)
    AC current frequency response 50Hz~60Hz
    AC voltage (V) 6V ±(1.2%+3)
    60V/600V/1000V ±(1%+8)
    DC voltage (V) 600mV ±(0.8%+3)
    6V/60V ±(0.5%+5)
    600V ±(0.5%+5)
    1000V ±(0.5%+5)
    AC voltage frequency response 40Hz~400Hz
    Resistance (Ω) 600Ω ±(1%+3)
    6KΩ/60KΩ/600KΩ ±(1%+2)
    6MΩ/60MΩ ±(2%+8)
    Capacitance (F) 60nF ±(4%+25)
    600nF/6μF/60μF/600μF ±(4%+5)
    6mF/60mF ±(10%+9)
    Low voltage frequency (Hz) 10Hz~1MHz ±(0.1%+3)
    Duty cycle (%) 10%~90% ±(2.6%+7)
    Features
    Display count 6000
    Jaw opening 42mm
    Current frequency 50Hz~60Hz
    High voltage frequency 40Hz~400Hz
    Auto power off
    Continuity test
    Auto/Manual range
    Low battery indication
    Diode test
    Relative mode/Data hold
    MAX/MIN
    Function selection
    Flashlight
    Wake-up function
    Auto power off current: <50μA
    Input impedance (ACV/DCV) ≥10MΩ
    General Characteristics
    Power 1.5V battery (R03) x 3
    Display 43mm x 45mm
    Product color Red and grey
    Product net weight 465g
    Product size 272mm x 81mm x 43.5mm
    Standard accessories Test leads, batteries, point contact temperature probe
    Standard individual packing Gift box, carrying bag, English manual
    Standard quantity per carton 10pcs
    Standard carton measurement 355mm x 330mm x 315mm
    Standard carton gross weight About 7.1kg
    SKU: n/a
  • UT302C+ Infrared thermometer

    0 out of 5
    (0)
    Specifications UT302C+
    Temperature range -32℃~1100℃
    -25.6℉~2012℉
    Accuracy ≥0℃: ±1.5℃ or ±1.5%; <0℃: ±(1.5℃+0.1℃/℃)
    ≥32℉: ±3.0℉ or ±1.5%; <32℉: ±(3.0℉+0.1℉/℉)
    Repeatability 0.7℃ or 0.7% (1.5℉ or 0.7%)
    D:S ratio 20:1
    Response time 250ms
    Emissivity 0.1~1.0 (adjustable, stores 5 sets of preset values)
    Spectral response 8um~14um
    Laser power < 1mW
    Features
    Auto power off
    Low battery indication
    LCD display Color EBTN
    High/low LED alarm
    High/low audible alarm
    Data hold/Lock measurement
    ℃/℉ selection
    MAX/MIN/AVG/DIFF mode
    Data storage with date and time 99
    Scheduled measurement
    Backlight
    Operating temperature 0℃~50℃ (32℉~122℉)
    Storage temperature  -20℃~60℃ (-4℉~140℉)
    Operating humidity <90%RH (non-condensing)
    Drop test 1m
    Tripod mounting hole
    General Characterisitics
    Power 9V battery
    Display 35mm x 35mm
    Product color Red and grey
    Product net weight 310g
    Product size 172mm x 113.5mm x 53mm
    Standard accessories Battery, carrying bag
    Standard individual packing Gift box, blister, English manual
    Standard quantity per carton 10pcs
    Standard carton measurement 425mm x 335mm x 365mm
    Standard carton gross weight 6.65kg
    SKU: n/a
  • YH 938D SMD STATION

    0 out of 5
    (0)

    1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.

    2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.

    3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.

    4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
    5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.

    SKU: n/a