- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
Weight | 4 kg |
---|---|
Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
Iron parts |
Gun parts |
DC power supply partsA |
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
Iron handle:Black handle |
Protection starting current:>standard value 10% |
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Rework & Soldering Station
YH 862BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W±10%(max) 300℃ Constant Temperature Power (High-Speed PID Programmed
to Energy Savings)
250W±10% Operating Environment 0~40℃ Relative humidity<80% Storage temperature -20~80℃ Relative humidity<80% Dimensions 31.5*22*22cm weight 3.5KG Performance Parameter Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 75W temperature range 100℃~480℃ 200℃~480℃ Air Supply Mode Brushless-Motor Fan — airflow 120L/min(max) — Temperature stability ±2℃ (static) ±2℃ (static) Display Mode Red LED Digital Display Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration
PID Digitally Programmed Calibration
Temperature correction PID digital program proofreading
PID digital program proofreading
SKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10% Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0~40℃ relative humidity<80% Storage environment -20~80℃ relative humidity<80% Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃~480℃ Temperature Stability ±1℃(Static) Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance <2Ω Tip-to-Ground Voltage <2mV SKU: n/a -
SMD Tester
UT 116A SMD Tester
Specifications Model UT116A Display count 3000 Resistance 30MΩ Capacitance 30mF Diode test 3V LED/stabilivolt About 21V/1mA Continuity Test <30Ω DCV 36V Auto range √ Auto scan identification √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery SKU: n/a -
Blower
Blower SE 768
● The 600 Watt Skill Electric air blower produces high velocity & high volume air output that ensures blowing out the dust, leaves from the uneasy to reach areas of household appliances, electric panel, car interiors, garden e t c.
● Dual function blower i.e blowing and extracting functions
● Powerful 600 W motor
● Variable speed control
● Ergonomic handle design
● Easy-to-change carbon brush
● 3-meter power cord for more flexible work
SKU: n/a -
Tool Kits
JM-6092A 57 in 1 Multi-Functional Screwdriver Hand Tool Set
- The tool box is manufacture from PP plastic, transparent and clear.
- Plastic design, strong resistance to fall, new pressure switch, strong and beautiful.
- The key position uses high quality CR-V material, the whole is durable: the extension pole that is equipp can solve a few narrow areas easily.
- The tool is equipp with strong magnetic anti-slide handle, which accords with the ergonomic appearance
- Double-side ball anti-slip design, with strong magnetic multi-angle lengthening bar, 9 knots are adjustable, make it easier to use .
- 57 Pcs in 1 Electronic bits Screwdriver Tools Kit Repair set
- Model: JM-6092A
- Package weight: 658g/1.45lb
- 32pcs- 6.35mm CR-V bits; v 20pcs- 4mm CR-V precision bits
- lpcs- 120mm PP&TPR plastic precision handle
- 1pcs- 125mm PP&TPR plastic non-slip handle
- 1pcs- 125mm Aluminum extension rod
- lpcs- 60mm Fine steel extension rod
- 1pcs- 130mm multi angle extension rod
SKU: n/a
There are no reviews yet.