- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
Weight | 4 kg |
---|---|
Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
Iron parts |
Gun parts |
DC power supply partsA |
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
Iron handle:Black handle |
Protection starting current:>standard value 10% |
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
SMD Tester
UT 116A SMD Tester
Specifications Model UT116A Display count 3000 Resistance 30MΩ Capacitance 30mF Diode test 3V LED/stabilivolt About 21V/1mA Continuity Test <30Ω DCV 36V Auto range √ Auto scan identification √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery SKU: n/a -
Multimeters
UT 133A Digital Multimeter
Specifications Range UT133A DC voltage (V) 600mV/6000mV/60V/600V ±(0.5%+3) AC voltage (V) 600V ±(0.7%+3) DC current (A) 600uA/60mA/600mA/10A ±(1%+3) AC current (A) 10A ±(1.2%+3) Resistance (Ω) 600Ω/6000Ω/60kΩ/600kΩ/60MΩ ±(0.8%+2) Capacitance (F) 9.999nF/99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF ±(4%+5) Frequency (Hz) 10.00Hz~1.000MHz ±(0.1%+5) Temperature (℃) ‒40℃~1000℃ ±(1%+4) Temperature (℉) ‒40℉~1832℉ ±(1.5%+5) Features Display count 6000 Range selection Auto Diode √ Continuity buzzer √ NCV √ LCD backlight √ Test probe holder √ Data hold √ Low battery indication √ Overload indication √ General Characteristics Power 1.5V battery (R03) x 2 Display 56.8mm x 36.1mm Product color Red and grey Product net weight 255g (with batteries) Product size 155mm x 76.5mm x 49mm Standard accessories Manual, test leads, K-type thermocouple SKU: n/a -
Multimeters
UT 61E+ Digital Multimeter
Specifications Range UT61E+ Certifications (UT161 Series only) CE/RoHS/cETLus Safety ratings CAT III 1000V/CAT IV 600V AC voltage (V) 1000V ±(0.8%+10) DC voltage (V) 1000V ±(0.05%+5) AC current (A) 20A ±(0.8%+10) DC current (A) 20A ±(0.5%+10) Resistance (Ω) 220MΩ ±(0.5%+10) Capacitance (F) 220mF ±(3%+5) Frequency (Hz) 220MHz ±(0.01%+5) Duty cycle (%) 0.1%~99.9% ±(2%+5) Display count 22000 Bandwidth (Hz) 40~10kHz LPF ACV √ ACV+DCV √ Transistor hFE √ Peak Hold √ Analog bar 46 General Characteristics Power 1.5V battery (R03) x 4 Product net weight 350g Product size 190mm x 90mm x 50mm Standard accessories Battery, gold plated test leads, USB cable, temperature multi-purpose socket, English manual Standard individual packing Gift box, cloth bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 365mm Standard carton gross weight 15.2kg Optional accessories Bluetooth/APP SKU: n/a -
Arbitary Waveform Generator
UTG2122B Function/Arbitrary Waveform Generator
Specifications UTG2122B Max frequency 120MHz Channels 2 Sampling rate 320MS/s Waveforms Sine, square, ramp, pulse, noise, DC, arbitrary; UTG2000B only: harmonic Working modes Output on/off, continuous, modulation, sweep, burst Modulations AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM Arbitrary Waveform Length 8pts~16Mpts Vertical resolution 16 bits (symbol included) Frequency Characteristics Sine 1μHz~60MHz Square 1μHz~25MHz Pulse 1μHz~20MHz Ramp 1μHz~3MHz Harmonic 1μHz~30MHz Arbitrary 1μHz~15MHz Noise 60MHz (-3dB) Resolution 1μHz Accuracy ±0.5ppm 25℃ First year aging rate: 1ppm Temperature coefficient: ±0.5ppm/℃ Temperature Coeifficient <2ppm/℃ Interfaces USB Host, USB Device, 10MHz clock source input/output General Characteristics Power 100V~240V ACrms, 50Hz/60Hz Display 4.3-inch TFT LCD, WVGA (480 x 272) Product color White and grey Product net weight 3.2kg Product size 265mm x 110mm x 320mm Standard accessories BNC-BNC cable, BNC cable with alligator clips, power cord, USB interface cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 380mm x 330mm x 320mm Standard carton gross weight 8.5kg SKU: n/a
There are no reviews yet.