YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
|
Iron parts |
Gun parts |
DC power supply partsA |
|
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
|
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
|
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
|
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
|
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
| Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
| Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
| Iron handle:Black handle |
Protection starting current:>standard value 10% |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Wire Tracker
UT 683KIT Wire Tracer
Description Certificates CE, RoHS Transmitter Port flashing √ Wire tracking √ Line alignment √ Open-short test 10kΩ Polarity test √ Operating time ＞8 hours Receiver Wire tracking RJ11＞3000m; RJ45＞100m NCV function √ Headset jack 3.5mm Low battery indication √ Operating time ＞5 hours GENERAL CHARACTERISTICS Power 1050mAh rechargeable lithium battery Product net weight Transmitter: around 95g; Receiver: around 127g Product size Transmitter-130mm x 51mm x 28mm; Receiver-197mm x 48mm x 34mm Standard accessories USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual Standard individual packing Gift box, carrying bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 325mm Standard carton gross weight About 10kg SKU: n/a -
-
DC Power Supplies
UTP 3305C DC POWER SUPPLY
Specifications Model UTP3305C Output voltage 0~30V (CH1/CH2) Output current 0~5A (CH1/CH2) Output power 315W Load regulation Voltage <0.01%+5mV Current <0.1%+10mA Line regulation Voltage <0.01%+3mV Current <0.1%+3mA Resolution Voltage 10mV Current 1mA Accuracy (25℃±5℃) Voltage <0.5%+20mV Current <0.5%+10mA Ripple (20Hz~20MHz) Voltage ≤2mVrms Current ≤3mArms Output temperature
coefficientVoltage ≤150ppm Current ≤150ppm Voltage rise delay ≤100ms (10% rated load) Parallel/Series load regulation ≤0.1%+0.1V CH3 output features Voltage 5V Current 3A Voltage accuracy ±50mV Load regulation ±50mV Interfaces USB Device, RS-232 General Characteristics Power AC 100V/120V/220V/230V±10%, 50Hz/60Hz Display 4 windows, LED Product net weight 9.1kg Product size 260mm x 176mm x 317mm Standard accessories USB and RS-232 interface cables, output cables Standard individual packing Carton box Standard quantity per carton 1pcs Standard carton measurement 440mm x 388mm x 295mm Standard carton gross weight 10kg SKU: n/a -
Laser Distance Meters
LM 50 Laser Distance Meter
Specifications LM50 Display type EBTN Display size 2.0-inches Range 50m Min. display unit 0.001m Measurement units m/ft/in Measurement basis front/rear Accuracy ±(2mm+5 x 10-5D) Laser class 2 Laser type 630~670nm, ﹤1mW Features Single measurement √ Continuous measurement √ Max/Min/Area √ Volume √ Pythagoras √ Add/Subtract √ Data storage 20 groups Auto power off 3 minutes without operation Auto laser off 30s without operation Auto backlight off 10s without operation Audio indication √ Battery status display √ Storage temperature -20℃~70℃ Operating temperature 0℃~40℃ SKU: n/a -
Meter Leads
UT L25 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- If you want to change your multimeter test lead, this is a great choice.
- Double insulated wire.
- Removable tip.
SKU: n/a -
Laser Level Meter
LM 571R-I Laser Level Meter
Specifications LM571R-I Display type Red Laser type 1V1H Expanded Angle H130°/V150° Laser class Class 2 Light source 10mW Laser wavelength 635nm H/V accuracy ±2mm/10m Self-leveling range 3°±1° Self-leveling time 3s Working distance (Line) 20m; ＞30m with detector Operating time ＞12h (All lasers on) Tripod mounting hole √ SKU: n/a
Related products
-
Rework & Soldering Station
YH 852 (BRUSHLESS FAN) Rework Station
Machine parameter Rated voltage AC 220V±10% 50Hz Machine power 700W±10％（MAX） working environment 0～40℃ relative humidity ＜80％ Storage temperature －20～80℃ relative humidity ＜80％ Machine size 25.5*18.8*12.5cm weight 3.55KG Part of performance parameters Hot air gun Soldering iron Working voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 60W temperature range 100℃～500℃ 200℃～500℃ Mode of airflow brushless fan — airflow 120L/min(max) — Temperature stability ±15℃ （static） ±10℃ （static） Display two LED (red/green) — heater Heating core ceramics heater common heater Tips to ground impedance — ＜2Ω Tips voltage to ground — ＜2mV SKU: n/a -
Rework & Soldering Station, Touch Seperator
YH 946A-III Touch Seperator
1. With PID programmable temperature control technology and the highest precision PID input program, temperature is both adjustable and stable while deviations are minimized.
2. The heated aluminum is smooth and flat, ensuring a uniform surface temperature.
3. This device has the following user-friendly design features:A. Celsius/Fahrenheit temperature display;B. Temperature correction feature.
4. The double-sided internal SMT manufacturing process boasts clean craftsmanship. The signal flow is clear, and the machine is both stable and safe, further improving its performance and adaptability to various harsh environments.
SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Rework & Soldering Station
YH 853D 5A-II ALL IN 1 REWORK STATION
A multi-station that fully integrates 3 professional stations that satisfy a broad range of soldering, reworking, and testing applications. Professional all-round performance and user experience for flexible applications. Advanced technologies, including precision temperature stabilization, temperature calibration, sleep mode, zero-airflow protection, automatic shut-down, and more
SKU: n/a
There are no reviews yet.