YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
|
Iron parts |
Gun parts |
DC power supply partsA |
|
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
|
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
|
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
|
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
|
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
| Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
| Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
| Iron handle:Black handle |
Protection starting current:>standard value 10% |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Multimeters
MF 47E Analog Multimeter
MF47E series of meters is were based on the original MF47 meter.
Then it developed multi-functional, multi-purpose and multi-protection series products.
For the characteristics of various types of users, it combinated the function of the optimal to facilitate the use of users and improved its cost-effective.
It was Engaged in computer
- electrical equipment
- household appliances
- electrical and electronic factories
- schools of scientific research
- production
- maintenance and repair people, they all can choose the right product in the MF47 series
SKU: n/a -
Laser Level Meter
LM 571R-I Laser Level Meter
Specifications LM571R-I Display type Red Laser type 1V1H Expanded Angle H130°/V150° Laser class Class 2 Light source 10mW Laser wavelength 635nm H/V accuracy ±2mm/10m Self-leveling range 3°±1° Self-leveling time 3s Working distance (Line) 20m; ＞30m with detector Operating time ＞12h (All lasers on) Tripod mounting hole √ SKU: n/a -
-
Tool Kits
JM 8139 47 in 1 Screwdriver Set Ratchet Hand-Tool
- Brand: JAKEMY
- Model: JM-8139
- Color: Orange
- Material: PP & TPR & CR-V steel
- Case Size: 200x135x57mm / 7.87×5.31×2.24in
- Product Weight: 733g / 25.9oz
- Size of Package: 215x170x60mm / 8.46×6.7×2.36in
- Package Weight: 827g / 29.2oz
Package included:
- 1 x Magnetic Non-Slip Handle (11.5cm)
- 30 x Screwdriver Bits
- 1 x Extension Bar (H4 x 60mm)
- 3 x PH2 to H5.0 Socket with Accessory Box
- 1 x Pentalobe 0.8mm Screwdriver (17.5cm)
- 1 x Cross 1.5mm Screwdriver (17.5cm)
- l x Roller Opening Tool (13cm)
- 1 x Curved Tweezers (11.5cm)
- 1 x Metal Spudger (17.8cm)
- l x Stainless Knife (13 cm)
- 1 x Plastic Opening Tool
- l x Suction Cup
- 1 x Sim Card Pin
- 1 x CR-V Bit
SKU: n/a
Related products
-
-
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Rework & Soldering Station
YH 948D Soldering Iron
YH 948D adopts PID programmable temperature control technology with an implantable highest-precision PID program for high-speed tracking and detection of the actual desoldering gun and soldering iron temperatures with real-time temperature correction. Yihua Desoldering Station comes in 3 in 1 design that Combines real 90W High Frequency and High Power Soldering, 130W High-Frequency Desoldering , and Vacuum Pick Up functions in a compact body..
Features Of YIHUA 948D 130W High-frequency Desoldering Station:
- Adopts PID programmable temperature control technology
- Equipped with a suction pen to help remove IC.
- The anti-static design prevents electrostatic component damage or leakage.
- Adopts an isolation transformer for power supply to heating elements and automatic shutoff functionality when the high-frequency soldering iron handle or desoldering gun handle is removed for safety and reliability.
- A portable built-in vacuum with strong suction does away with external vacuum systems.
SKU: n/a -
Rework & Soldering Station
YH 899D-II REWORK STATION
PARAMETERSPower consumption 720W Gun Temperature range 100-480°C Gun heater material Ferro-alloys Gun heater resistance 74Ω Gun type Brushless Fan air flow 120L/min Soldering Iron Temperature range 200-480°C soldering Iron Type Blue Handle Soldering Iron Heater material Imported high-power heater Soldering Iron heater power 60W Gross weight 3.3KG/pcs Inner box Dimension(cm) 29*20*18 Outer box Dimension(cm) 59.5*41*36 QTY 8PCS PER outer carton SKU: n/a
There are no reviews yet.