- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
Weight | 4 kg |
---|---|
Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
Iron parts |
Gun parts |
DC power supply partsA |
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
Iron handle:Black handle |
Protection starting current:>standard value 10% |
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
-
Wire Tracker
UT 683KIT Wire Tracer
Description Certificates CE, RoHS Transmitter Port flashing √ Wire tracking √ Line alignment √ Open-short test 10kΩ Polarity test √ Operating time >8 hours Receiver Wire tracking RJ11>3000m; RJ45>100m NCV function √ Headset jack 3.5mm Low battery indication √ Operating time >5 hours GENERAL CHARACTERISTICS Power 1050mAh rechargeable lithium battery Product net weight Transmitter: around 95g; Receiver: around 127g Product size Transmitter-130mm x 51mm x 28mm; Receiver-197mm x 48mm x 34mm Standard accessories USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual Standard individual packing Gift box, carrying bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 325mm Standard carton gross weight About 10kg SKU: n/a -
Rework & Soldering Station
YH 853D+5A ALL IN ONE REWORK STATION
1. The power supply is high-precision DC power supply with Constant Voltage and Current, output voltage:0-30V DC adjustable, output current :0-5A adjustable, Power supply with overload protection, high accuracy, reliability, designed for scientific research, product development, laboratories, schools, portable computer repair, electronics production lines etc.
2. Enhanced safety features. Full intelligence self-detection functions on air gun and iron to provide safe operation mode.
3. The air gun automatically enters standby when the temperature is less than 70oC thresho.
4. With short circuit, open circuit, over-temp and over-load protection.
5. Automatic cooling function for effectively prolonging the heater’s life and protecting the hot air gun.
SKU: n/a -
Rework & Soldering Station
YH 8508D+ Hot Air Rework Station
- 1.The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability. 4.Increase the wind the ball, can more clearly see the operation of the wind.
SKU: n/a
There are no reviews yet.