YH 898BD+ REWORK STATION
| Machine parameter | |
| Rated voltage | AC 220V±10% 50Hz |
| Total Power | 730W |
| 300℃ Constant Temperature Power
(High-Speed PID Programmed to Energy Savings) |
250W±10％ |
| Operating Environment | 0～40℃ Relative humidity＜80％ |
| Storage temperature | －20～80℃ Relative humidity＜80％ |
| Dimensions | 13.5*15*10cm |
| weight | 2.65KG |
₨13,680 ₨14,840
Adopting Samsung microprocessor-PID programming for high-speed 200ms real-time tracking of air gun outlet temperatures and soldering iron tip temperatures, with real-time calibration! Outlet temperatures are extremely stable. Soldering iron handle wire /air gun handle wire employs a high-temperature silicone wire(undamaged when 300o soldering tip contacts silicone wire for 30 seconds);The soldering iron handle employs an imported high-power heating element for fast temperature compensation, especially useful for large joint welding, welding repairs, and difficult desoldering work, in additional to general welding applications and soldering small-sized components.
| Weight | 2.6 kg |
|---|---|
| Dimensions | 13 × 15 × 10 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 898BD+ REWORK STATION”
-
Meter Leads
UT L25 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- If you want to change your multimeter test lead, this is a great choice.
- Double insulated wire.
- Removable tip.
SKU: n/a -
DC Power Supplies
YH 1501T DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 25W Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a -
Soldering Irons
YH 928D-III Soldering Iron
1. Application of sensor temperature control circuit, microcomputer temperature control technology, accurate temperature, rapid heating, fast temperature compensation, is a with LED digital precision display portable constant temperature soldering iron.
2. Application of high precision switching power supply technology, small size, light weight, easy to carry.
3. Equipped with digital temperature correction function, sleep function, Fahrenheit / Celsius display conversion function.
4. Application of unique design of high-precision LED display, showing clear and beautiful.
5. Red is for 110W, yellow is for 90W and blue is for 65W.
SKU: n/a -
Tool Kits
JM 8139 47 in 1 Screwdriver Set Ratchet Hand-Tool
- Brand: JAKEMY
- Model: JM-8139
- Color: Orange
- Material: PP & TPR & CR-V steel
- Case Size: 200x135x57mm / 7.87×5.31×2.24in
- Product Weight: 733g / 25.9oz
- Size of Package: 215x170x60mm / 8.46×6.7×2.36in
- Package Weight: 827g / 29.2oz
Package included:
- 1 x Magnetic Non-Slip Handle (11.5cm)
- 30 x Screwdriver Bits
- 1 x Extension Bar (H4 x 60mm)
- 3 x PH2 to H5.0 Socket with Accessory Box
- 1 x Pentalobe 0.8mm Screwdriver (17.5cm)
- 1 x Cross 1.5mm Screwdriver (17.5cm)
- l x Roller Opening Tool (13cm)
- 1 x Curved Tweezers (11.5cm)
- 1 x Metal Spudger (17.8cm)
- l x Stainless Knife (13 cm)
- 1 x Plastic Opening Tool
- l x Suction Cup
- 1 x Sim Card Pin
- 1 x CR-V Bit
SKU: n/a
Related products
-
Rework & Soldering Station
YH 852 (BRUSHLESS FAN) Rework Station
Machine parameter Rated voltage AC 220V±10% 50Hz Machine power 700W±10％（MAX） working environment 0～40℃ relative humidity ＜80％ Storage temperature －20～80℃ relative humidity ＜80％ Machine size 25.5*18.8*12.5cm weight 3.55KG Part of performance parameters Hot air gun Soldering iron Working voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 60W temperature range 100℃～500℃ 200℃～500℃ Mode of airflow brushless fan — airflow 120L/min(max) — Temperature stability ±15℃ （static） ±10℃ （static） Display two LED (red/green) — heater Heating core ceramics heater common heater Tips to ground impedance — ＜2Ω Tips voltage to ground — ＜2mV SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Rework & Soldering Station
YH 995D+ ADVANCE REWORK STATION
Model: YH-995D+
· Centigrade/Fahrenheit Programmable
· Temperature Compensation Programmable: -50 °C to +50 °C
· Manual / Automatic Programmable
· Cool Air / Hot Air Changeable
· Temperature Presettable
· Sleep Mode: 0-99 Minutes
· Samsung Dual Core Microcomputer Processor
· ESD Safe
· Total Power Consumption: 720 Watts
· Air Flow Type: Brushless Fan
· Max Air Flow Volume: 120L/min
· Hot Air Gun: 650 Watts
. Temperature Range 212° F ~ 896°F/100°C ~ 480°C with Auto Cool Down
· Hot Air Gun Temperature Stability: ±1.8°F/1.0°C
· Hot Air Gun Tube Material: 100% Silicone (Virtually No Memory)
· Soldering Iron: 65 Watts
. TemperatureRange 392°F ~ 896°F/200°C ~ 480°C
· Soldering Iron Temperature Stability: ±3.6°F/2.0°C
· Soldering Iron Cord Material: 100% Silicone (Virtually No Memory)
· Working Environment: 0°F ~ 122°F/ 0°C ~ 50°C
· Storage Environment: -68°F ~ 176°F/-20°C ~ 80°C
· Inner box Dimensions: 29*20*18cm
· Unit Weight: 3.2 KG
· QTY:8PCS/CTN
· Outer carton size:59.5*41*36cm
· G.W:25.6KG/CTNSKU: n/a -
Rework & Soldering Station
YH 862BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W±10％（max） 300℃ Constant Temperature Power (High-Speed PID Programmed
to Energy Savings)
250W±10％ Operating Environment 0～40℃ Relative humidity＜80％ Storage temperature －20～80℃ Relative humidity＜80％ Dimensions 31.5*22*22cm weight 3.5KG Performance Parameter Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 75W temperature range 100℃～480℃ 200℃～480℃ Air Supply Mode Brushless-Motor Fan — airflow 120L/min(max) — Temperature stability ±2℃ （static） ±2℃ （static） Display Mode Red LED Digital Display Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration
PID Digitally Programmed Calibration
Temperature correction PID digital program proofreading
PID digital program proofreading
SKU: n/a
There are no reviews yet.