YH 939D+ SOLDERING STATION
Out of stock
| MODEL | 939D+ |
| RATED VOLTAGE | AC 220V±10% 50Hz |
| OUTPUT POWER | 75W |
| Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 200W±10％ |
| Withstand voltage and insulation tests | AC1500V 0.4A 60S |
| Operating Environment | 0～40℃ relative humidity＜80％ |
| Storage environment | －20～80℃ relative humidity＜80％ |
| Body size | 14.5*12*8CM |
| Weight | 2.17KG |
| Work voltage | AC 26V±10% 50Hz |
| Temperature range | 200℃～480℃ |
| Temperature Stability | ±1℃（Static） |
| Display Mode | LED Digital Display |
| Calibration Mode | PID Digitally Programmed Calibration |
| PID Temperature Calibration Cycle | 100MS |
| Heating Core | Imported High-Powered Heating Core |
| Tip-to-Ground Impedance | ＜2Ω |
| Tip-to-Ground Voltage | ＜2mV |
₨8,764 ₨10,900
Out of stock
Compare1.Three storage sections:CH1/CH2/CH3, each storage segment can store all the features of the current
machine (eg:temperature, iron sleep time,which is currently on display all function values can
be stored), you can quickly switch between each storage segment.
2. Master the core technology, SAMSUNG MCU the PID procedures to high-speed 100ms cycle real-time tracking of the temperature of the iron tips, and real-time correction, the magic temperature compensation speed, to make it more stable temperature, the temperature error is smaller and able to adapt to a variety of harsh environment.
3.The use imported heater, addition to suitable for general small solder joints ,also particularly suitable for large desoldering, solder joints, hybrid hard solder desoldering;
4. Anti-static design, which can effectively avoid damage to delicate components;
5. It has automatically detects the failure and alarm function
6. Use bran-new sturdy mold manufacturing, pressure-resistant anti-fall; blue ferroalloy Iron holder and durable.
7. The handle line is silicone line, high temperature resistance, good flexibility (300 ° C iron tips touch silicone line 30s without damage)
8. Sleep function , Automatic shutdown function , Celsius / Fahrenheit function
a), Sleep function soldering iron automatic detection of their work status are not in use in a quiescent state, arriving to set the sleep time, the temperature of the iron automatically lower the temperature to 200 ° C enter into sleep state, can effectively prevent the oxidation of iron head and prolong the iron tip service life, energy saving and environmental protection. The sleep time can be set range 0 to 99 minutes in 1 minute steps, users can be set based on usage, if you do not need a soldering iron sleep ,the sleep time is set to 0.
b) Automatic shutdown function after soldering iron enter into sleep state, start the timer program, set the shutdown time did not wake up from sleep, automatic shutdown, energy saving and environmental protection. Auto power off time setting range 0 to 99 minutes in 1 minute steps.
c) Celsius / Fahrenheit temperature display function designed to meet the market needs of the different regions of the temperature display mode.
d)-50 °C to +50 °C temperature compensation function.
9.The panel is different from traditional ,used aluminum alloy material, with new appearance design and improved performance .
10.The silvery knob give the users high-end and specialty sensor.
| Weight | 2.1 kg |
|---|---|
| Dimensions | 14 × 12 × 8 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 939D+ SOLDERING STATION”
-
Laser Level Meter
LM 571LD-I Laser Level Meter
Specifications LM571LD-I Display type Green Laser type 1V1H Expanded Angle H130°/V150° Laser class Class 2 Light source 10mW Laser wavelength 510nm H/V accuracy ±2mm/10m Self-leveling range 3°±1° Self-leveling time 3s Working distance (Line) 20m; ＞30m with detector Operating time ＞12h (All lasers on) Tripod mounting hole √ SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Tool Kits
JM 8139 47 in 1 Screwdriver Set Ratchet Hand-Tool
- Brand: JAKEMY
- Model: JM-8139
- Color: Orange
- Material: PP & TPR & CR-V steel
- Case Size: 200x135x57mm / 7.87×5.31×2.24in
- Product Weight: 733g / 25.9oz
- Size of Package: 215x170x60mm / 8.46×6.7×2.36in
- Package Weight: 827g / 29.2oz
Package included:
- 1 x Magnetic Non-Slip Handle (11.5cm)
- 30 x Screwdriver Bits
- 1 x Extension Bar (H4 x 60mm)
- 3 x PH2 to H5.0 Socket with Accessory Box
- 1 x Pentalobe 0.8mm Screwdriver (17.5cm)
- 1 x Cross 1.5mm Screwdriver (17.5cm)
- l x Roller Opening Tool (13cm)
- 1 x Curved Tweezers (11.5cm)
- 1 x Metal Spudger (17.8cm)
- l x Stainless Knife (13 cm)
- 1 x Plastic Opening Tool
- l x Suction Cup
- 1 x Sim Card Pin
- 1 x CR-V Bit
SKU: n/a -
Related products
-
-
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a -
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a
There are no reviews yet.