-20%

YH 939D+ SOLDERING STATION

Availability:

Out of stock
Add to Wishlist
Compare
PARAMETROS
MODEL 939D+
RATED VOLTAGE AC 220V±10%  50Hz
OUTPUT POWER 75W
Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％
Withstand voltage and insulation tests AC1500V 0.4A 60S
Operating Environment 0～40℃  relative humidity＜80％
Storage environment －20～80℃  relative humidity＜80％
Body size 14.5*12*8CM
Weight 2.17KG
Work voltage AC 26V±10%  50Hz
Temperature range 200℃～480℃
Temperature Stability ±1℃（Static）
Display Mode LED Digital Display
Calibration Mode PID Digitally Programmed Calibration
PID Temperature Calibration Cycle 100MS
Heating Core Imported High-Powered Heating Core
Tip-to-Ground Impedance ＜2Ω
Tip-to-Ground Voltage ＜2mV

₨8,764 ₨10,900

Out of stock

Compare

1.Three storage sections:CH1/CH2/CH3, each storage segment can store all the features of the current

machine (eg:temperature, iron sleep time,which is currently on display all function values can

be stored), you can quickly switch between each storage segment.

2. Master the core technology, SAMSUNG MCU the PID procedures to high-speed 100ms cycle real-time tracking of the temperature of the iron tips, and real-time correction, the magic temperature compensation speed, to make it more stable temperature, the temperature error is smaller and able to adapt to a variety of harsh environment.

3.The use imported heater, addition to suitable for general small solder joints ,also particularly suitable for large desoldering, solder joints, hybrid hard solder desoldering;
4. Anti-static design, which can effectively avoid damage to delicate components;
5. It has automatically detects the failure and alarm function
6. Use bran-new sturdy mold manufacturing, pressure-resistant anti-fall; blue ferroalloy Iron holder and durable.
7. The handle line is silicone line, high temperature resistance, good flexibility (300 ° C iron tips touch silicone line 30s without damage)
8. Sleep function , Automatic shutdown function , Celsius / Fahrenheit function
a), Sleep function soldering iron automatic detection of their work status are not in use in a quiescent state, arriving to set the sleep time, the temperature of the iron automatically lower the temperature to 200 ° C enter into sleep state, can effectively prevent the oxidation of iron head and prolong the iron tip service life, energy saving and environmental protection. The sleep time can be set range 0 to 99 minutes in 1 minute steps, users can be set based on usage, if you do not need a soldering iron sleep ,the sleep time is set to 0.
b) Automatic shutdown function after soldering iron enter into sleep state, start the timer program, set the shutdown time did not wake up from sleep, automatic shutdown, energy saving and environmental protection. Auto power off time setting range 0 to 99 minutes in 1 minute steps.
c) Celsius / Fahrenheit temperature display function designed to meet the market needs of the different regions of the temperature display mode.

d)-50 °C to +50 °C temperature compensation function.

9.The panel is different from traditional ,used  aluminum alloy material, with new appearance design and improved performance .

10.The silvery knob give the users high-end and specialty sensor.

Category:
Weight 2.1 kg
Dimensions 14 × 12 × 8 cm

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YH 939D+ SOLDERING STATION”

There are no reviews yet.

  • YH 995D+ ADVANCE REWORK STATION

    YH 995D+ ADVANCE REWORK STATION

    0 out of 5
    (0)

    Model: YH-995D+
    · Centigrade/Fahrenheit Programmable
    · Temperature Compensation Programmable: -50 °C to +50 °C
    · Manual / Automatic Programmable
    · Cool Air / Hot Air Changeable
    · Temperature Presettable
    · Sleep Mode: 0-99 Minutes
    · Samsung Dual Core Microcomputer Processor
    · ESD Safe
    · Total Power Consumption: 720 Watts
    · Air Flow Type: Brushless Fan
    · Max Air Flow Volume: 120L/min
    · Hot Air Gun: 650 Watts
    . Temperature Range 212° F ~ 896°F/100°C ~ 480°C with Auto Cool Down
    · Hot Air Gun Temperature Stability: ±1.8°F/1.0°C
    · Hot Air Gun Tube Material: 100% Silicone (Virtually No Memory)
    · Soldering Iron: 65 Watts
    . TemperatureRange 392°F ~ 896°F/200°C ~ 480°C
    · Soldering Iron Temperature Stability: ±3.6°F/2.0°C
    · Soldering Iron Cord Material: 100% Silicone (Virtually No Memory)
    · Working Environment: 0°F ~ 122°F/ 0°C ~ 50°C
    · Storage Environment: -68°F ~ 176°F/-20°C ~ 80°C
    · Inner box Dimensions: 29*20*18cm
    · Unit Weight: 3.2 KG
    · QTY:8PCS/CTN
    · Outer carton size:59.5*41*36cm
    · G.W:25.6KG/CTN

    SKU: n/a
    ₨21,451 ₨23,691
    Read more
    Add to Wishlist
    Compare

  • YH 948D Soldering Iron

    YH 948D Soldering Iron

    0 out of 5
    (0)

    YH 948D adopts PID programmable temperature control technology with an implantable highest-precision PID program for high-speed tracking and detection of the actual desoldering gun and soldering iron temperatures with real-time temperature correction. Yihua Desoldering Station comes in 3 in 1 design that Combines real 90W High Frequency and High Power Soldering, 130W High-Frequency Desoldering , and Vacuum Pick Up functions in a compact body..

    Features Of YIHUA 948D 130W High-frequency Desoldering Station:

    • Adopts PID programmable temperature control technology
    • Equipped with a suction pen to help remove IC.
    • The anti-static design prevents electrostatic component damage or leakage.
    • Adopts an isolation transformer for power supply to heating elements and automatic shutoff functionality when the high-frequency soldering iron handle or desoldering gun handle is removed for safety and reliability.
    • A portable built-in vacuum with strong suction does away with external vacuum systems.

     

    SKU: n/a
    ₨41,458 ₨46,067
    Read more
    Add to Wishlist
    Compare

  • YH 1501T DC POWER SUPPLY

    YH 1501T DC POWER SUPPLY

    0 out of 5
    (0)
    Parameters
    Rated voltage AC220V±10%  50Hz
    Power of complete machine 25W
    Operating environment 0～40℃  relative humidity＜80％
    Storage temperature －20～80℃  relative humidity＜80％
    Dimensions of the machine body 27*14*22cm
    Weight 1.9KG
    Performance parameters
    Output voltage Adjustable continuously within 0～15V
    Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A)
    Output power 15W
    Source effect ≤1mV
    Load effect ≤0.33%
    Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms
    Display accuracy 0.1V/0.1A/1mA
    Protection mode Over-current, short circuit, over-temperature protection
    Dissipation mode Air cooling
    SKU: n/a
    ₨5,500 ₨7,000
    Add to cart
    Add to Wishlist
    Compare

  • UT L28 Meter Lead

    UT L28 Meter Lead

    0 out of 5
    (0)
    • Suitable for digital multimeter testing, convenient to use.
    • Used to test current,voltage,resistance,capacitance,frequency,etc.
    • Test pen tip with rubber shrouded protection, prevent wear and lasting use.
    • High quality, it’s a good tool and brings a lot of conveniences.
    • Double insulated wire.
    • Removable tip shield sleeve.
    • Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
      ● Tip length: 16.8mm
      ● Safety level: CAT III 1000V/CAT IV 600V 10A
      ● Safety certificate: EN 61010-031 A1:2015
      ● Features and application: Double insulated wire, removable
    SKU: n/a
    ₨1,052 ₨1,317
    Add to cart
    Add to Wishlist
    Compare

  • LM 570LD-I Laser Level Meter

    LM 570LD-I Laser Level Meter

    0 out of 5
    (0)
    Laser Type 1V1H
    Expanded Angle H110°/V110°
    Laser Class 2
    Light Source 10 mW
    Laser Wavelength 510 nm
    H/V Accuracy ±3 mm/10 m
    Self-leveling Range 3°±1°
    Self-leveling Time 3 s
    Working Distance 20 m-40 m
    Operating Time >4 h
    Power AA battery (LR6) × 2 pcs.
    Operating Temperature from -10°C to +40°C
    Storage Temperature from -20°C to +70°C
    Dimensions 59 mm × 28 mm × 137 mm
    Weight 170 g
    SKU: n/a
    ₨10,800 ₨11,846
    Add to cart
    Add to Wishlist
    Compare

  • YH 850B HEAT GUN

    YH 850B HEAT GUN

    0 out of 5
    (0)

    Operating Voltage :AC 220V±10%  50Hz

    Total Power:650W

    Operating Environment 0～40℃

    relative humidity ＜80％

    Storage Temperature-20～80℃

    relative humidity ＜80％

    Dimensions :255*188*125mm

    Weight:2.8KG

    performance parameter 850B

    Temperature Range :100℃～450℃

    display mode —-

    air supply mode :Brushless-Motor Fan

    Airflow:120L/min(Max)

    Temperature stability :±15℃ （static）

    Heating Core: Ceramic Framed Heating Core

    SKU: n/a
    ₨5,790 ₨6,581
    Read more
    Add to Wishlist
    Compare

Related products

  • YIHUA 850 Hot Air Heat Gun Rework Station

    YIHUA 850 Hot Air Heat Gun Rework Station

    0 out of 5
    (0)

    Application

    Applicable to desoldering of several types of elements: SOIC, CHIP, QFP, PLCC, BGA; the smaller the gun nozzle, the stronger of the force; suitable for desoldering of single soldering spots.

    SKU: n/a
    ₨6,317 ₨7,897
    Read more
    Add to Wishlist
    Compare

  • YH 853D 2A Rework Station All IN 1

    YH 853D 2A Rework Station All IN 1

    0 out of 5
    (0)
    • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
    • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
    • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
    • 4). Hot air rework, soldering iron are equipped by variety of fault protection
    SKU: n/a
    ₨20,400 ₨22,111
    Add to cart
    Add to Wishlist
    Compare

  • YH 852 (BRUSHLESS FAN) Rework Station

    YH 852 (BRUSHLESS FAN) Rework Station

    0 out of 5
    (0)
                    Machine parameter
    Rated voltage AC 220V±10%  50Hz
    Machine power 700W±10％（MAX）
    working environment 0～40℃  relative humidity ＜80％
    Storage temperature －20～80℃  relative humidity ＜80％
    Machine size 25.5*18.8*12.5cm
    weight 3.55KG
    Part of performance parameters Hot air gun Soldering iron
    Working voltage AC 220V±10%  50Hz AC 26V±10%  50Hz
    Output power 650W 60W
    temperature range 100℃～500℃ 200℃～500℃
    Mode of airflow brushless fan —
    airflow 120L/min(max) —
    Temperature stability ±15℃ （static） ±10℃ （static）
    Display two LED (red/green) —
    heater Heating core ceramics heater common heater
    Tips to ground impedance — ＜2Ω
    Tips voltage to ground — ＜2mV
    SKU: n/a
    ₨8,159 ₨8,555
    Read more
    Add to Wishlist
    Compare

  • YH 706 REWORK STATION

    YH 706 REWORK STATION

    0 out of 5
    (0)
    Model 706 872D+
    Power Consumption 720W 720W
    Measurement 124*187*157MM 124*187*157MM
    Weight 4.5KG 4.8KG
    Working environment 0~50°C 0~50°C/0~122°F
    Storage environment -20-80°C -20-80°C
    Hot Air Reworks
    Airflow type dual-turbo blower diaphragm pump spiral wind
    Air Flow ≤168L/min ≤24L/min
    Temperature Range 100°C-480°C 100°C-480°C
    Temperature Stability ±1°C ±1°C
    Display Type Digital Display Digital Display
    Handle length ≥90CM ≥90CM
    Soldering Iron
    Temperature Range 200°C-480°C 200°C-480°C
    Temperature Stability ±2°C ±2°C
    Tip of ground voltage <2mv<> <2mv<>
    Tip ground impedance <2 ohm <2 ohm
    Display Type Digital Display Digital Display
    Handle length ≥100CM ≥100CM
    SKU: n/a
    ₨13,080 ₨16,658
    Read more
    Add to Wishlist
    Compare
Got Questions ? Call us 24/7! 03324478447
© Mart pakistan.com , best price in pakistan - All Rights Reserved
Got Questions ? Call us 24/7! 03324478447