-8%

YH 992D A+ 3 IN 1 REWORK STATION


parameters
Rated voltage AC 220V±10%  50Hz
power 720W±10%(Max)
300℃ Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 250W±10%
Working environment 0~40℃ relative humidity<80%
Storage environment -20~80℃  relative humidity<80%
Dimensions 255*188*125mm
Weight 5.11KG
Parts parameters Hot air gun Soldering iron
Operating Voltage AC 220V±10%  50Hz AC 26V±10%  50Hz
Output power 550W 75W
Temperature range 100℃~480℃ 200℃~480℃
Air Supply Mode Diaphragm pump
Air Flow 28L/min(MAX)
  Temperature Stability ±1℃ (Static ±1℃ (Static
Display Mode LCD display LCD display
Calibration Mode The PID digital program

proofreading

The PID digital program

proofreading

PID Temperature Calibration Cycle rapidly 20ms high-speed 100ms
Heating Core Ceramic columned heating element. Imported heater
Standard nozzles/tips (3mm,5mm,8mm,10mm,13mm)

5PCS nozzles

B
Tip ground impedance <2Ω
Tip of ground voltage <2mV

37,560 40,802

Compare

1.The air gun/soldering iron features -50ºC to +50ºC temperature compensation

2.The air gun/soldering iron features ºF/ºC conversion

3.The air gun features manual/automatic work mode conversion4.The soldering iron features a sleep function that can be set from 0-99 minutes.YIHUA992DA+ upgrade version have all above YIHUA992DA basic function, also additional below function :A)Three section temperature storage mode (able to store hot air gun temperature, soldering iron temperature, air volume, temperature correction, automatic hibernation, automatic and manual mode, etc. These three sections can be switched freely).B)Cold air function added, able to switch between hot air and cold air.

Weight 5.11 kg
Dimensions 25 × 19 × 12 cm

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YH 992D A+ 3 IN 1 REWORK STATION”

There are no reviews yet.

  • YH 1502D+ DC POWER SUPPLY

    0 out of 5
    (0)
    Parameters
    Rated voltage AC220V±10%  50Hz
    Operating environment 0~40℃  relative humidity<80%
    Storage temperature -20~80℃  relative humidity<80%
    Dimensions of the machine body 27*14*22cm
    Weight 1.9KG
    Performance parameters
    Output voltage Adjustable continuously within 0~15V
    Output current Adjustable continuously within 0~2A (current limitation adjustment when above 0.2A)
    Output power 15W
    Source effect ≤1mV
    Load effect ≤0.33%
    Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms
    Display accuracy 0.1V/0.1A/1mA
    Protection mode Over-current, short circuit, over-temperature protection
    Dissipation mode Air cooling
    SKU: n/a
  • YH 853D 2A Rework Station All IN 1

    0 out of 5
    (0)
    • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
    • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
    • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
    • 4). Hot air rework, soldering iron are equipped by variety of fault protection
    SKU: n/a
  • UT-CS09A Flex Clamp Sensor

    0 out of 5
    (0)
    Specifications Range UT-CS09A
    AC current (A) 30A/300A/3000A ±(3%+5)
    Frequency response (Hz) 45Hz~500Hz
    Features
    Flex clamp size UT-CS09A: 25.4cm (10 inches); UT-CS09C: 45.7cm (18 inches)
    Operating temperature 0℃~50℃
    Storage temperature  -20°C~60°C
    Storage humidity ≤80%RH
    Low battery indication About 3.3V
    Range selection Manual
    General Characterisitics
    Power 1.5V battery (R03) x 3
    Product color Red and grey
    Product net weight 260g
    Product size 267mm x 119.4mm x 34mm
    Standard accessories Batteries, BNC adapter
    Standard individual packing Blister, English manual
    Standard quantity per carton 10pcs
    Standard carton measurement 495mm x 405mm x 225mm
    Standard carton gross weight 7kg
    SKU: n/a
  • LM 571LD-I Laser Level Meter

    0 out of 5
    (0)
    Specifications LM571LD-I
    Display type Green
    Laser type 1V1H
    Expanded Angle H130°/V150°
    Laser class Class 2
    Light source 10mW
    Laser wavelength 510nm
    H/V accuracy ±2mm/10m
    Self-leveling range 3°±1°
    Self-leveling time 3s
    Working distance (Line) 20m; >30m with detector
    Operating time >12h (All lasers on)
    Tripod mounting hole
    SKU: n/a
  • UT 695D-10 Optical Multimeter

    0 out of 5
    (0)
    Specifications
    Model Description
    Optical power meter Wavelength range 800nm~1700nm
    Calibrated wavelength 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm
    Measurement range  -70~3dBm
    Uncertainty ±5%
    Display resolution Linear: 0.1%, logarithmic: 0.01dBm
    Connector FC/SC/ST
    Detector  type InGaAs
    Visual fault locator Wavelength 650nm±10nm
    Power 10mW (measurable optical fiber length: approximately 8~10km)
    Mode Continuous/Pulse
    Connector FC/SC/ST
    Flashlight
    LAN cable sequence test Line sequence measurement (LED1~8, LED_G)
    General Characteristics
    Power 1050mAh rechargeable battery
    Display 42mm x 33mm
    Product color Red and grey
    Product net weight 168g
    Product size 132mm x 68mm x 31mm
    Standard accessories USB cable
    Standard individual packing Gift box, English manual
    Standard quantity per carton 10pcs
    Standard carton measurement 305mm x 270mm x 130mm
    Standard carton gross weight About 2.7kg
    SKU: n/a
  • ,

    YH 947-V Soldering Iron

    0 out of 5
    (0)

    1. Small size, light weight, easy to carry.

    2. Usage of internal heating element for fast heating and high efficiency.

    3. Temperature adjustable.

    4. With a power switch, turn off the switch when you are not using the iron,

    for safety and energy saving.

    5. Equipped with LED lights, in the case of lacking of light, open the lights, so that soldering is more

    desirable and humanized.

    6. Apply the SMT double-panel manufacturing technology with neat process and solid joints

    7. The handle shell with a new environmentally friendly materials is safe and durable.

    SKU: n/a