YIHUA 303D DC Power Supply
Feature
303D communication maintenance power supply is a single line output of stabilized high accuracy
DC stabilized power supply. The output voltage and current can be adjusted continuously within the
rated range. The load current has MA conversion with two settings: 0-3A and 0-99 mA. Constant
voltage and constant current (CV/CC), automatic switching of working modes. Double digital display
shows output voltage and current independently. Several protection functions include current
limitation, voltage reduction, short circuit protection, over-temperature protection, etc. The design
is applied to production line of the plant, maintenance, laboratories and is also a necessary device
for the communication industry.
₨7,586 ₨10,529
Principle description of constant voltage/constant current CV/CC
The operation mode of constant voltage/constant current can be automatically switched depending
on the comparison result of the load current and limited current value.
- a) Constant voltage CV
When the existing current value is smaller than the set output limit current value, the power supply
is working under the constant voltage mode. The CV indicator light on the front panel is on, the
output voltage is controlled and it will be the same as the set value. Current changes with the load.
- b) Constant current mode (CC)
When the current value exceeds the limit value of the output current, the equipment will work in
the CC mode. The CC indicator light on the front panel is on, the output current value is controlled
to the set value. Since the limited output power cannot be overloaded, the output voltage can be
lower than the set value. When the output current is lower than the set value, the equipment will
automatically change to CC mode.
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 13 × 15 cm |
Machine parameters
| Parameters | |
| rated voltage | AC220V 50Hz |
| Power of complete machine | 140W |
| Operating environment | 0～40℃ relative humidity ＜80％ |
| Storage Temperature | －20～80℃ relative humidity ＜80％ |
| Dimensions of the machine body | 255*130*150mm |
| weight | 4.3KG |
| Performance parameters | |
| output voltage | Adjustable continuously within 0～30V |
| output current | Adjustable continuously within 0～3A/0-99mA
(current limitation adjustment when above 0.2A) |
| output power | 90W |
| Source effect | 1mV |
| load effect | ≤0.33% |
| Ripple noise | ≤3mVrms（5Hz ~ 1MHz）/≤3mArms |
| Display accuracy | 0.1V/0.1A/1mA |
| Protection mode | Over current, short circuit, over temperature protection |
| Dissipation mode | air cooling |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 303D DC Power Supply”
-
Oscilloscopes
UTD2072CEX-II Digital Storage Oscilloscope
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate3. Up to 28Mpts memory depth4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),10kHz or 100kHz5. Max 10Mpts waveform record6. 8-inch TFT LCD, WVGA (800X480)SKU: n/a -
Multimeters
UT890C+ TRMS Digital Multimeter
1.6000 Counts; Measure voltage and current RMS.
2.The capacitance slot has REL function. Range is from 1pF to 99.99mF
3.The device can measure frequency of high accuracy. The min resolution is 0.001Hz4.It has special functions: MAX/MIN and MAX-MIN
5.The min DC and AC resolution is 0.01μA and 1μA. The max range is 20A.
6.It can measure diode whose voltage drop is up to 3V .So it is very suitable to measure LED.
7.It has functions: hold, power off and backlight.
8.It also measure temperature ℃ and ℉SKU: n/a -
Related products
-
DC Power Supplies
UTP1306 DC Power Supply
Specifications Model UTP1306 Output voltage 0~32V Output current 0~6A Output power 192W Load regulation CV＜0.1%+5mVCC＜0.2%+3mA Accuracy(25℃±5℃) Voltage ＜0.1%+5mV Current ＜0.2%+3mA Ripple and noise ≤1mVrms Output regulation resolution Reliability CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs Display mode LED voltage and current dual display Feature Auto conversion of constant voltage and current with current limit protection General Characteristics Power Input voltage: 110V AC/220V AC; 50Hz~60Hz Product color White and grey Product net weight 2.5kg Product size 80mm x 150mm x 230mm Standard accessories Power cord, output cables SKU: n/a -
-
DC Power Supplies
UDP1306C Industrial Linear DC Power Supply
Features of UDP1306C Industrial Linear DC Power Supply:
- 4-digit high precision display
- OVP OCP OTP protection
- Output setting viewable
- Remote control (output ON/OFF)
- Shutdown memory/keypad lock
- Intelligent cooling fan
- USB charging interface
- RS232 program-controlled communication
- USB device communication
- 5 sets of data storage
SKU: n/a -
DC Power Supplies
DC Power Supply UTP3305
Features:
1. Dual channel, two circuits of adjustableoutput voltage 0~32V and one circuit of fixed voltage 5V.
2. Master-slave tracking, constant voltageand current, Ⅰ, Ⅱ circuit can be used for master-slave tracking and used in parallelor in series.
3. Forced ventilation, temperature controlcooling system. When the temperature reaches 65℃, the device dissipatesheat automatically.
4. Display mode: LED digital tube display,can show voltage and current simultaneously.
5. Low ripple, low noise
6. High regulation: 0.01%
7. Output ON/OFF control
8. Constant voltage and constant currentoperation
9. Optional European standard outputterminal
10. Overload protection, reverse polarityprotection
SKU: n/a
There are no reviews yet.