-28%

YIHUA 303D DC Power Supply


Feature

303D communication maintenance power supply is a single line output of stabilized high accuracy

DC stabilized power supply. The output voltage and current can be adjusted continuously within the

 rated range. The load current has MA conversion with two settings: 0-3A and 0-99 mA. Constant

voltage and constant current (CV/CC), automatic switching of working modes. Double digital display

shows output voltage and current independently. Several protection functions include current

 limitation, voltage reduction, short circuit protection, over-temperature protection, etc. The design

 is applied to production line of the plant, maintenance, laboratories and is also a necessary device

for the communication industry.

7,586 10,529

Compare

Principle description of constant voltage/constant current CV/CC

The operation mode of constant voltage/constant current can be automatically switched depending

on the comparison result of the load current and limited current value.

  1. a) Constant voltage CV

When the existing current value is smaller than the set output limit current value, the power supply

 is working under the constant voltage mode. The CV indicator light on the front panel is on, the

output voltage is controlled and it will be the same as the set value. Current changes with the load.

  1. b) Constant current mode (CC)

When the current value exceeds the limit value of the output current, the equipment will work in

the CC mode. The CC indicator light on the front panel is on, the output current value is controlled

 to the set value. Since the limited output power cannot be overloaded, the output voltage can be

lower than the set value. When the output current is lower than the set value, the equipment will

automatically change to CC mode.

Category:
Weight 4 kg
Dimensions 25 × 13 × 15 cm

Machine parameters

Parameters
rated voltage AC220V  50Hz
Power of complete machine 140W
Operating environment 0~40℃  relative humidity <80%
Storage Temperature -20~80℃  relative humidity <80%
Dimensions of the machine body 255*130*150mm
weight 4.3KG
Performance parameters
output voltage Adjustable continuously within 0~30V
output current Adjustable continuously within 0~3A/0-99mA

(current limitation adjustment when above 0.2A)

output power 90W
Source effect 1mV
load effect ≤0.33%
Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms
Display accuracy 0.1V/0.1A/1mA
Protection mode Over current, short circuit, over temperature protection
Dissipation mode air cooling

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YIHUA 303D DC Power Supply”

There are no reviews yet.

  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a
  • TDGC 2000VA

    0 out of 5
    (0)

    Input Voltage=220V/230V
    Output Voltage=0-250V
    Maximum Output Current=8
    Copper Wind
    LCD Output Display
    Three Pin Output Socket

    SKU: n/a
  • UT523A Earth Resistance Soil Resistivity Tester

    0 out of 5
    (0)

    UT523A Earth Resistance Soil Resistivity Tester

    SKU: n/a
  • NCV Tester 8848

    0 out of 5
    (0)
    SKU: n/a