YIHUA 850 Hot Air Heat Gun Rework Station
Out of stock
Application
Applicable to desoldering of several types of elements: SOIC, CHIP, QFP, PLCC, BGA; the smaller the gun nozzle, the stronger of the force; suitable for desoldering of single soldering spots.
₨6,317 ₨7,897
Out of stock
CompareYH-850 Diaphragm pump hot air desoldering station
Product Features
1.Fine-control diaphragm pump is employed for powerful airflows; the smaller the nozzle of the gun, the stronger the airflow.
(a) Nozzles with diameters smaller than 5 mm and normal-sized nozzle (8 mm, 10 mm, 12mm) are suitable for use, we do not recommend use with larger nozzles. Since the pressure of the air pump is large, the smaller the nozzle the stronger the force, and even small nozzles are able to blow out the hot air from the handle.
(b) Characteristics of the diaphragm pump type airflow: large pressure and small volume (the maximum volume is 24 or 28 L/min)
(c) Applicable range:
The smaller the gun nozzle installed in the machine, the bigger the pressure and stronger the force, suitable for desoldering of single small soldering spots.
2.a cutting-edge ceramic-framed heating core for extremely stable and reliable performance!
3.The air gun handle wire employs a high-temperature silicone wire (undamaged when 300o soldering tip contacts silicone wire for 30 seconds)
| Weight | 3 kg |
|---|---|
| Dimensions | 26 × 19 × 13 cm |
Product parameters
| Performance Parameters of the Machine | |
| Rated Voltage | AC 220V±10% 50Hz |
| Total Power | 550W |
| working condition | 0～40℃ relative humidity ＜80％ |
| Operating Environment | －20～80℃ relative humidity ＜80％ |
| Dimensions | 255*188*125mm |
| Weight | 3.3KG |
| Temperature Range | 100℃～450℃ |
| air supply mode | Pump air supply |
| Air Flow | 24L/min(Max) |
| Temperature stability | ±15℃ （static state） |
| Heating element | Ceramic skeleton heater |
standard configuration
Desoldering station 1 Manual : 1
Air gun handle 1 Nozzle:3（5mm 8mm 10mm）
IC extractor 1 Holder 1
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 850 Hot Air Heat Gun Rework Station”
-
-
Multimeters
UNI T Bench Top Digital Multimeter UT8803E
- 20,000 Count EBTN LCD Display
- DC Voltage: 200mV/2V/20V/200V/1000V
- AC Voltage: 2V/20V/200V/750V
- DC Current: 200μA/2mA/20mA/200mA/20A
- AC Current: 2mA/20mA/200mA/20A
- Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
- Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
- Frequency: 200Hz~10MHz
- Duty cycle: 5%~99%
- Frequency response: 1 kHz
- USB Interface
- Data hold
- MAX/MIN
- Continuity buzzer
- Diode/transistor
- test
- CAT II 600V
SKU: n/a -
Corbon Mono Oxide Meter
Uni-T UT337 Carbon Monoxide Meter
Suitable for use everywhere from in the house to restaurants, offices and industrial areas, the UT337A measures the exact value of carbon monoxide (CO) present in the air. Featuring a built-in sensor integrated into the top of the unit, the UT337A measures CO content from 0-1000ppm with accuracy of ±5% (5ppm) and resolution of 1ppm. The sensor is also designed to adjust rapidly to changes, ensuring you always get a stable, accurate reading. When CO levels exceed a certain threshold, the UT337A will alert the user by using a combination of audible and LED light indicators. The alarm is configurable to the user’s specification and it is also possible to use this meter to calculate temperature values.
SKU: n/a -
Multimeters
UT18B Voltage And Continuity Testers
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.SKU: n/a
Related products
-
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a -
Rework & Soldering Station
YH 899D REWORK STATION
Power consumption 700W Gun temperature 100-480oC Gun type Brushless fan Air flow 120L/MIN Gun heater material Ferro-alloys Gun heater resistance 74Ω Soldering iron temperature range 200-480oC Soldering iron type Blue type Soldering iron cable Silicagel line Soldering iron heater material high-quality heater Soldering iron heater resistance 15Ω Inner box dimension(cm) 29*20*18 Outer box dimension(cm) 59.5*41*36 Outer carton box Q’TY 8PCS/CTN Prodcut weight 2.75KG/PC SKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
There are no reviews yet.