-
×
YH 862BD+ REWORK STATION
- Vendor:
Subtotal: ₨18,600
-22%
Rework & Soldering Station
YIHUA 937D Repairing Soldering Iron
Standard Configuration
Main unit 1set
Soldering iron handle (include iron tips and heater) 1pc
Iron holder 1pc
High temperature resistant sponge 1pc
Manual 1pc
Power plug :1pc
Application Scope
Production lines for electronic products ,.
2. Repair industry for moblie phone.
3. SMD components requiring the highest precision.
₨5,626 ₨7,239
Thermostatic solder station provid good soldering iron YIHUA 937D
Features
1.YIHUA937D features rapid heating，fast temperature compensation，High-precision and stable temperature control, this can effectively prevents cold solder joints.
2.An anti-static design effectively prevents damage to delicate components;
3.Our equipment applies the high quality metal heater which will not be twisted off and longer life.
5.This model features Automatic fault detection and alarm functions;
| Weight | 1.7 kg |
|---|---|
| Dimensions | 36 × 17 × 11 cm |
Parameters
| parameters | |
| Rated voltage | AC 220V±10% 50Hz |
| Output power | 50W |
| Operating Environment | 0～40℃ relative humidity＜80％ |
| Storage environment | －20～80℃ relative humidity＜80％ |
| Dimensions | 36*17*11.5 CM |
| Weight | 1.71KG |
| Operating voltage | AC 26V±10% 50Hz |
| Temperature range | 200℃～480℃ |
| Temperature Stability | ±10℃ （Static） |
| Display type | Red/green LED display |
| Heating elements | Common heater |
| Tip-to-Ground Impedance | ＜2Ω |
| Tip-to-Ground Voltage | ＜2mV |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 937D Repairing Soldering Iron”
-
Spudger
JM OP07 METAL SPUDGER SET
DescriptionItem Description:- Material: Metal
- Brand: JAKEMY
- Features:
– Dual tipped design, various blades for every repair situation.
– Easy to use and handle.
– 3-in-1 metal set.
– Made of stainless steel, sturdy yet still flexible. - Brand:JAKEMY
- Model: JM-OP07
- Material: Stainless steel
- Place of Application: Repair
- Note:
Be careful when using these tools.With their great strength comes the potential to scratch or otherwise damage components that might be better served with plastic tools such as a plastic tool.
SKU: n/a -
-
Earth Ground Resistance Testers
UT275 Clamp Earth Ground Testers
UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
SKU: 90000
Related products
-
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Rework & Soldering Station
YH 995D+ ADVANCE REWORK STATION
Model: YH-995D+
· Centigrade/Fahrenheit Programmable
· Temperature Compensation Programmable: -50 °C to +50 °C
· Manual / Automatic Programmable
· Cool Air / Hot Air Changeable
· Temperature Presettable
· Sleep Mode: 0-99 Minutes
· Samsung Dual Core Microcomputer Processor
· ESD Safe
· Total Power Consumption: 720 Watts
· Air Flow Type: Brushless Fan
· Max Air Flow Volume: 120L/min
· Hot Air Gun: 650 Watts
. Temperature Range 212° F ~ 896°F/100°C ~ 480°C with Auto Cool Down
· Hot Air Gun Temperature Stability: ±1.8°F/1.0°C
· Hot Air Gun Tube Material: 100% Silicone (Virtually No Memory)
· Soldering Iron: 65 Watts
. TemperatureRange 392°F ~ 896°F/200°C ~ 480°C
· Soldering Iron Temperature Stability: ±3.6°F/2.0°C
· Soldering Iron Cord Material: 100% Silicone (Virtually No Memory)
· Working Environment: 0°F ~ 122°F/ 0°C ~ 50°C
· Storage Environment: -68°F ~ 176°F/-20°C ~ 80°C
· Inner box Dimensions: 29*20*18cm
· Unit Weight: 3.2 KG
· QTY:8PCS/CTN
· Outer carton size:59.5*41*36cm
· G.W:25.6KG/CTNSKU: n/a
There are no reviews yet.