UT171 series are industrial grade multimeters used by professionals. Its built-in square wave output is useful for troubleshooting industrial control signals. Its LoZ (ACV) feature can be used to identify residual (ghost) voltage in large capacitors. UT171C’s OLED display is perfect for working in low temperatures down to -30°C.
Multimeters
UT171C Industrial True RMS Digital Multimeter
Availability:
Out of stock
1. AC+DC measurement
2. Peak hold
3. Rechargeable battery
4. VFC low-pass filtering
5. USB/Bluetooth communication
₨69,000 ₨71,850
Out of stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 21 × 9 × 5 cm |
Specifications | Range | UT171C |
DC voltage (V) | 1000V | ±(0.025%+5) |
AC voltage (V) | 1000V | ±(0.4%+40) |
DC current (A) | 10A | ±(0.15%+2) |
AC current (A) | 10A | ±(0.75%+5) |
Resistance (Ω) | 60MΩ | ±(0.05%+2) |
Admittance (nS) | 60nS | ±(1%+10) |
Capacitance (F) | 60mF | ±(2.5%+40) |
Frequency (Hz) | 10Hz~10MHz | ±(0.01%+5) |
Temperature (°C) | -40°C~1000°C | ±(1%+30) |
Temperature (°F) | -40°F~1832°F | ±(1.5%+50) |
Features | ||
Display count | 60000 | |
Auto/Manual range | √ | |
Bandwidth (Hz) | 100kHz | √ |
4~20mA loop | 0~100% | √ |
LoZ (ACV) | Around 3kΩ | √ |
Diode | Around 3V | √ |
Continuity buzzer | √ | |
Duty cycle | 0.1%~99.9% | √ |
NCV/Data hold/MAX/MIN | √ | |
Relative mode | √ | |
Data storage | 9999 | |
Display type | OLED | |
Analog bar graph | 31 | |
LCD backlight | √ | |
Mis-plug alarm | √ | |
Low battery indication | √ | |
Auto power off | √ | |
Input protection | √ | |
Input impedance for DCV | √ | |
Input impedance for DCV | Around 1GΩ | √ |
General Characteristics | ||
Power | 7.4V 2000mAh Li-ion battery | |
Display | 70.6mm x 35.3mm | |
Product color | Red and grey | |
Product net weight | 384g | |
Product size | 206mm x 95mm x 55mm | |
Standard accessories | Batteries, test leads, point contact temperature probe,USB interface cable, power adaptor, PC software CD | |
Optional accessory | Bluetooth adaptor (UT-D07) |
Based on 0 reviews
Be the first to review “UT171C Industrial True RMS Digital Multimeter”
-
Power Quality Analyzer
PQM-707 Power Quality Analyzer
-
Features:
- 7″ touch screen – intuitive operating
- CAT IV 600V – high safety
- all parameters acc. to class S – high accuracy of measurements
- Li-Ion rechargeable battery – higher mobility
- removable memory card – recording data with no restrictions
Possible measurements:
- Measurements according to EN 50160,
- Voltage L1, L2, L3, N-PE (five inputs),
– average, minimum, maximum values, range to 760 V, ability to work with voltage transformers, - Current L1, L2, L3, N (four inputs),
– average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers, - Crest factor for voltage and current,
- Frequency from 40 Hz to 70 Hz ,
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
- Power recording:
- Budeanu method,
- IEEE 1459,
- Active, reactive, apparent energy,
- Power factor, cosφ, tgφ,
- Up to 50th harmonics for voltage and current,
- Total Harmonic Distortion (THD) for voltage and current,
- Short-term (PST) and long-term (PLT) flicker,
- Unbalance of voltage and current,
- Current and voltage events registration including waveforms and RMS graphs half period,
- Inrush current
- Calculator of energy tariffs
- ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
SKU: n/a -
-
-
Multimeters
Fluke 17B+ Digital Multimeter
Key features
- 600 V Cat III safety rating
- 50% bigger display with bright white backlight
- Over-voltage indicator
- Frequency and temperature measurement
- Voltage, resistance, continuity, capacitance
- Input terminal for ac and dc current measurements to 10 A current
- Diode test, data hold
SKU: n/a -
Clamp Meters
MT87 3 1/2 Digits LCD Digital Clamp Meter
This meter features a portable design, 31/2 LCD display and 25mm jaw opening, which can provides various measurements for AC/DC voltage, AC current, resistance, diode and continuity buzzer. It is also with functions of date hold, low battery indication, overload indication, etc. More detailed product information, please refer to the English manual.
SKU: MT 87 CLAMP METER -
Earth Ground Resistance Testers
MRU-30 Earth Resistance and Resistivity Meter
-
It allows to take the measurements of:
- earthing resistance using auxiliary electrodes,
- earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
- earthing resistance using double clamps for measuring multiple earthing without underground connections.
- ground resistivity (Wenner method),
- continuity of equipotential bondings and protective
- conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.
Additionally:
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network
- with frequency 50Hz, 60Hz,
- selection of maximum measuring voltage (25V and 50V),
- introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
- memory of 990 measurements (10 banks of 99 cells each),
- calibration of clamp used,
- data transmission to the computer (USB),
- indication of battery state.
SKU: n/a -
There are no reviews yet.