ANALOG METER DE 360
Features Of Analog Multimeter DE360TRN:
- Tests AC voltage, DC voltage, DC current, resistance, continuity and batteries.
- 20kOhm/V DC sensitivity.
- Mirrored scale.
- With fuse overload protection circuitry incorporated.
- Easy to read, colour-coded analogue displays.
- Manual range selection.
- Pocket-sized analogue tester.
₨1,700 ₨1,853
Analog Multimeter DE360TRN
Analog Multimeter DE360TRN is easy to read, colour-coded analogue displays. Analog meter DE360TRN, you can use it to measure AC/DC voltage, DC current, resistance, diode check, continuity and transistor leak current, for DC current. This meter can measure as low as 10 microamps and up to 250 mA, which is hard to do with a digital multimeter. The acts as an ammeter with low series resistance to measure direct current. For measuring high current, we connect a shunt resistor across the galvanometer so that the current through the galvanometer does not cross its maximum allowed value. Here, a significant portion of the current to be measured bypasses through the shunt. With that shunt resistance, an analogue multimeter can measure even milli-ammeter or ammeter ranges of current.
Specifications Of Analog Meter DE360TRN Analog Ohmmeter:
- DCV: 0 – 0.1V ±1% 0.25V/2.5/10V/50V/250/1000 ±3%
- ACV: 0 -10/50/250/1000V ±4%
- DCA: 0 – 50µA/2.5mA/25mA/250mA ±3%
- Resistance: 0 – 2K/20K/200K/2M/20Mohm ±3% *dB: -10 dB – 22 dB
- Light: Diode check (including LED)
- Continuity: both Buzzer & flash
- Transistor leak current Features: All range fused
- Compact size
- Tilt back-stand
- Continuity flash
- 0-ohm adjustment
Brand
China Brand
Based on 0 reviews
Be the first to review “ANALOG METER DE 360”
-
Tool Kits
JM-8127 53 In 1 Professional Screwdriver Set Tool Kit
Features:
Common used for precision work in electronics, DIY models, jewelry, eye glasses and other home appliances.
Special pentalobe screws for opening iPhone, iPad and MacBook.
Non-slip: handle with PP & TPR material.
Accessories:
1PC 115mm Tweezer
1PC H4*120mm Extension Bar
1PC Multifunction extension bar
SKU: n/a -
LCR Meter
UT620 Series Digital Micro Ohm Meters
UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.
SKU: UN62B0TUOM -
-
Clamp Meters
MS 2109A ACA DCA Digital Clamp Meters
● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery DisplaySKU: n/a
Related products
-
Analog Multimeters
ANALOG METER YX 360TR BS
Features Of Handheld YX-360TRE-B Analog Meter Voltmeter:
- High accuracy analogue multimeter for general purposes.
- Mirrored needle indicator with an accurate reading.
- Check both AC and DC parameters with continuity buzzer on Ohms.
- Up to 1000V on both AC and DC Voltage.
- 19 versatile ranges for general-purpose testing.
- Fuse & Diode protection.
- Compact sizing.
- Tilt back-stand.
- The large and mirrored scale of 80mm length.
SKU: n/a
There are no reviews yet.