-
×
Et-8908 Intelligent Multimeter Precise Auto-sensing Capacitance Voltage
- Vendor:
superworld
Subtotal: ₨3,100
-8%
Analog Multimeters
ANALOG METER DE 360
Features Of Analog Multimeter DE360TRN:
- Tests AC voltage, DC voltage, DC current, resistance, continuity and batteries.
- 20kOhm/V DC sensitivity.
- Mirrored scale.
- With fuse overload protection circuitry incorporated.
- Easy to read, colour-coded analogue displays.
- Manual range selection.
- Pocket-sized analogue tester.
₨1,700 ₨1,853
Analog Multimeter DE360TRN
Analog Multimeter DE360TRN is easy to read, colour-coded analogue displays. Analog meter DE360TRN, you can use it to measure AC/DC voltage, DC current, resistance, diode check, continuity and transistor leak current, for DC current. This meter can measure as low as 10 microamps and up to 250 mA, which is hard to do with a digital multimeter. The acts as an ammeter with low series resistance to measure direct current. For measuring high current, we connect a shunt resistor across the galvanometer so that the current through the galvanometer does not cross its maximum allowed value. Here, a significant portion of the current to be measured bypasses through the shunt. With that shunt resistance, an analogue multimeter can measure even milli-ammeter or ammeter ranges of current.
Specifications Of Analog Meter DE360TRN Analog Ohmmeter:
- DCV: 0 – 0.1V ±1% 0.25V/2.5/10V/50V/250/1000 ±3%
- ACV: 0 -10/50/250/1000V ±4%
- DCA: 0 – 50µA/2.5mA/25mA/250mA ±3%
- Resistance: 0 – 2K/20K/200K/2M/20Mohm ±3% *dB: -10 dB – 22 dB
- Light: Diode check (including LED)
- Continuity: both Buzzer & flash
- Transistor leak current Features: All range fused
- Compact size
- Tilt back-stand
- Continuity flash
- 0-ohm adjustment
Brand
China Brand
Based on 0 reviews
Be the first to review “ANALOG METER DE 360”
-
Multimeters
UT195DS Professional Digital Multimeters
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. 5/s sampling rate
4. True RMS
5. ACV 750V 5kHz bandwidth
6. (AC+DC) or (AV+FREQ) , dual mode
7. Flashlight
8. Auto LCD backlight controlled by light sensor (can be turned off)
9. LoZ voltage test, for ghost voltage measurement
10. Motor phase sequence measurement with 2 probes
11. 20A current measurement (max 30 seconds)
12. 31 analogue bar
13. Low pass filter, 1kHz 3dB attenuation
SKU: n/a -
Clamp Meters
UT208B 1000A True RMS Digital Clamp Meters
Features of UT200 Series 1000A True RMS Digital Clamp Meters
Certifications: CE, UKCA, cETLus
● Flashlight button: Short press this button to turn on/off the flashlight
● NCV Multi-Segment Display and audio/visual alarm● True RMS/Auto backlight● NCV/Function retentionSKU: n/a -
Oscilloscopes
UTD2102CEX Digital Storage Oscilloscope
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. The new interface style;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 32 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
SKU: n/a
Related products
-
Analog Multimeters
ANALOG METER YX 960 TR
Features Of YX-960 TR Handheld Analog Multimeter:
- Excellent DC resolution factor of 2mV.
- Expanded resistance measurement from 020 to 200M.
- Series capacitor DC to enable measurement of only AC components.
- A large and bright meteor with a scale length of 80mm.
- The sensitivity of 44pA at full scale.
- Fuse and diode protection.
- Measures hFE of transistor directly.
SKU: n/a
There are no reviews yet.