Clamp Meter DT 3266
Out of stock
- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
₨811 ₨1,308
Out of stock
Compare- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
| Weight | 0.3 kg |
|---|---|
| Dimensions | 15 × 7 × 4 cm |
| FUNCTION | MEASURING RANGE | ACCURACY | ||
| DCV | 200mv/2v/20v/200v | ±(0.8%+2) | ||
| 600v | ±(1.0%+2) | |||
| 400mv/4v/40v/400v | ±(0.8%+2) | |||
| 600v | ±(1.0%+2) | |||
| ACV | 2V/20V/200V | ±(1.0%+5) | ||
| 600V | ±(1.2%+5) | |||
| 400mv/4v/40v/400v | ±(1.0%+10) | |||
| 600V | ±(1.2%+10) | |||
| ACA | 2A/20A | ±(3.0%+10) | ||
| 200A | ±(2.5%+10) | |||
| 4A/40A/400A | ±(2.5%+10) | |||
| 600A | ±(1.5%+5) | |||
| Ω | 200Ω/2KΩ/20KΩ/200KΩ/2MΩ | ±(1.2%+2) | ||
| 20MΩ | ±(2.0%+5) | |||
| 400Ω/4KΩ/40KΩ/400KΩ/4MΩ | ±(1.2%+2) | |||
| 40MΩ | ±(2.0%+5) | |||
| CX | 200uf | ±(4.0%+10) | ||
| HZ | 0∞10MHZ | ±(2.0%+5) | ±(1.5%+15) | |
| °C | – 20°C ≤ 750°C | ±(2%+2) | ||
| FEATURE | ||||
| LCD | DIGITS | 1999 | 3999 | |
| Clamp Size | Opening | 30mm | 30mm | |
| Test Range | Ac voltage/dc voltage/AC-DC current,resistance | • | • | |
| Capacitance/frequency/duty cycle/temperature | • | |||
| Power | 3X1.5v AAA | |||
| Weight | 133.5g | |||
| Security | CE,ETL,CATIII 600V ROHS | |||
Brand
SZBJ
Based on 1 review
Add a review
-
Phase Detector Meters
UT262A Non-Contact Phase Detector
UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.
SKU: 22000 -
Multimeters
UT195DS Professional Digital Multimeters
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. 5/s sampling rate
4. True RMS
5. ACV 750V 5kHz bandwidth
6. (AC+DC) or (AV+FREQ) , dual mode
7. Flashlight
8. Auto LCD backlight controlled by light sensor (can be turned off)
9. LoZ voltage test, for ghost voltage measurement
10. Motor phase sequence measurement with 2 probes
11. 20A current measurement (max 30 seconds)
12. 31 analogue bar
13. Low pass filter, 1kHz 3dB attenuation
SKU: n/a -
Multimeters
UT195M Professional Digital Multimeter
Features
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. True RMS
4. ACV 750V 5kHz bandwidth
5. Flashlight
6. Auto LCD backlight controlled by light sensor (can be turned off)
7. LoZ voltage test, for ghost voltage measurement
8. Motor phase sequence measurement with 2 probes
9. 20A current measurement (max 30 seconds)
SKU: n/a
Related products
-
Clamp Meters
UT281A True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rd edition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Data hold, backlight, auto power off
SKU: n/a -
Clamp Meters
UT220 2000A ACA Digital Clamp Meters
UT220 series is a stable, safe and reliable3 1/2 AC and DC Digital Clamp Meters, full range overload protection and unique appearance design, which becomes more superior performance of electrical instruments. It is suitable for smelt, manufacturing, petroleum, electricpower, chemical industry etc. It’s an ideal tool for the maintenance and repair of the circuit, power equipment.
SKU: n/a -
Clamp Meters
UT216B 600A True RMS Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216B (main features)- 1、600A AC current measurement；
- 2、True RMS response for ACV and ACA；
- 3、99.99mF capacitance measurement；
- 4、V.F.C function for measuring signal at variable frequency ；
- 5、Non-contact voltage detection with LED indication；
- 6、Flashlight for working at dark environment.
SKU: n/a -
Clamp Meters
MT87 3 1/2 Digits LCD Digital Clamp Meter
This meter features a portable design, 31/2 LCD display and 25mm jaw opening, which can provides various measurements for AC/DC voltage, AC current, resistance, diode and continuity buzzer. It is also with functions of date hold, low battery indication, overload indication, etc. More detailed product information, please refer to the English manual.
SKU: MT 87 CLAMP METER
Zafar Ayyub –
Dt3266 clampmeter
Zafar Ayyub –