HTC CM-2007 600A AC Clamp Meter with Temp Frequence
- Digital Clamp meter DC Voltage: 400mV/4V/40V/400V/600V; Resolution: 0.1mV/1mV/ 10mV/100mV/1V; Accuracy: � 1.0% + 5 digits/ � 0.5% + 5 digits
- AC Voltage: 400mV/4V/40V/400V/600V; Resolution: 0.1mV/1mV/10mV/100mV/1V; Accuracy: �1.5% + 5 digits/ � 1.0% + 5 digits
- AC Current: 400A to 600A; Resolution: 100mA to 1A; Accuracy: <40A �3.0% + 5 digits/ >40A �2.0% + 5 digits
- Resistance: 400 ohm/4k?/40k?/400k?/4M?/40M?; Resolution: 0.1?/1?/ 10?/ 100M?/1k?/10 k?; Accuracy: � 0.8% + 5 digit/� 0.8% + 3 digits/� 1.2% + 5 digits
- Capacitance: 4nF/40nF/400nF/4?F//40?F /200?F; Resolution: 1pF/10pF/100pF/1nF/10nF/100nF; Accuracy: � 5.0% + 20 digit/� 3.5% + 00 digit/� 5.0% + 10 digit
- Frequency Range (Hz): 100Hz to 10mHz; Resolution: 0.01Hz to 1kHz; Accuracy: /� 0.5% + 5 digits/Accessories: CM-2000 Digital Clamp meter, Instruction Manual, Test Lead, Soft Caring Case / Power: AAA 1.5 x 2
Brand
China Brand
Based on 0 reviews
Be the first to review “CLAMP METER AC CM 2007”
-
Multimeters
UT195DS Professional Digital Multimeters
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. 5/s sampling rate
4. True RMS
5. ACV 750V 5kHz bandwidth
6. (AC+DC) or (AV+FREQ) , dual mode
7. Flashlight
8. Auto LCD backlight controlled by light sensor (can be turned off)
9. LoZ voltage test, for ghost voltage measurement
10. Motor phase sequence measurement with 2 probes
11. 20A current measurement (max 30 seconds)
12. 31 analogue bar
13. Low pass filter, 1kHz 3dB attenuation
SKU: n/a -
Environment Meters
UT361 Anemoscopes
UT360 series anemograph is a professional anemograph used to measure wind temperature, wind speed and wind capacity, which is of stable performance, reliable and of neoteric appearance. The device can be widely used in the fields such as environmental protection, labor hygiene, industrial enterprise, scientific research. It is applied to environmental noise measurement, machinery equipment noise and architectural acoustics measurement.
SKU: n/a -
Usb Tester
UT658 A USB Testers
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
SKU: n/a
Related products
-
Clamp Meters
UT219E ACA Professional Clamp Meters
Features
1. 2m drop proof, IP54, CAT IV 600V
2. Large 6000-digit LCD backlight (auto) display
3. True RMS
4. LoZ voltage test, for ghost voltage measurement
5. MAX/MIN/REL testing mode, data hold, excluding the test lead interference of resistance measurement
SKU: n/a -
Clamp Meters
MS 2109A ACA DCA Digital Clamp Meters
● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery DisplaySKU: n/a -
Clamp Meters
UT220 2000A ACA Digital Clamp Meters
UT220 series is a stable, safe and reliable3 1/2 AC and DC Digital Clamp Meters, full range overload protection and unique appearance design, which becomes more superior performance of electrical instruments. It is suitable for smelt, manufacturing, petroleum, electricpower, chemical industry etc. It’s an ideal tool for the maintenance and repair of the circuit, power equipment.
SKU: n/a -
Clamp Meters
UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a
There are no reviews yet.