Clamp Meter BM 528A
- Digital Clamp Meter
- 31/2LocationDigit,Maximum displayMAXDisplay:1999,Data HoldDH
- OverloadOverLoadProtection
- Maximum jaw openingMAXexpand of the pincers:30mm
- Off testCONTINUITY
- BUZZER
- diodeDIODE
₨2,500 ₨3,052
- Digital Clamp Meter
- 31/2LocationDigit,Maximum displayMAXDisplay:1999,Data HoldDH
- OverloadOverLoadProtection
- Maximum jaw openingMAXexpand of the pincers:30mm
| Weight | 0.3 kg |
|---|---|
| Dimensions | 22 × 7 × 3 cm |
Brand
SZBJ
Based on 0 reviews
Be the first to review “Clamp Meter BM 528A”
-
Oscilloscopes
UTD2102CEX-II Digital Storage Oscilloscope
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate3. Up to 28Mpts memory depth4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),10kHz or 100kHz5. Max 10Mpts waveform record6. 8-inch TFT LCD, WVGA (800X480)SKU: n/a -
Multimeters
VC 9205A DMM
Feature:
- Maximum voltage between terminals and earth ground: 1000DC or 700VAC
- Fuse proteciton: F 200mA/250V
- Power: 9V battery, NEDA 1604 0r 6F22
- Display: LED
- Operating temperature: 0~40℃
- Storage temperature: -10~50℃
- AC Voltage (V): 200mV, 2V, 20V, 200V, 700V
- DC Voltage (V): 200mV, 2V, 20V, 200V,1000V
- AC Current (A): 2mA, 20mA, 200mA, 20A
- DC Current (A): 2mA, 20mA, 200mA, 20A
SKU: n/a
Related products
-
Clamp Meters
UT213C ACA DCA Digital Clamp Meters
Main Features
1. 10A/400A AC/DC measurement with Hall-effect sensor
2. Auto range makes measurement faster and more effective
3. 4000 display count, 3/s sampling rate
4. True RMS measurement
5. NCV, Non-Contact AC Voltage testing
6. Frequency and duty ratio measurement
7. MAX/MIN mode
8. Relative mode
9. Flashlight function for measuring at night or in the dark
10. K-type point contact temperature probe for temperature measurement
11. Large jaw of 30mm
12. Data hold
13. LCD backlight
14. Auto power off
15. 1m drop proof
16. Complies with CE (European Union) directives
SKU: n/a -
Clamp Meters
UT281C True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rdedition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Datahold, backlight, auto power off
SKU: n/a -
Clamp Meters
UT219M ACA Professional Clamp Meters with Motor Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust. The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage. UT-219M is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
There are no reviews yet.