| Weight |
0.6 kg |
| Dimensions |
28 × 11 × 5 cm |
AC current measurement (TRUE RMS) up to 1500 A and DC up to 2000 A.
Measurement of INRUSH current in start-up phase of electrical device.
AC voltage measurement (TRUE RMS) up to 750 V and DC up to 1000 V.
Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 30 Ω.
Capacitance measurement
Temperature measurement (Fahrenheit or Celsius).
Frequency measurement.
Duty cycle measurement.
Diode test.
Additionally:
- safe, insulated measuring clamp,
- autoranging,
- „DATA HOLD” function, for holding measured values,
- backlit LCD,
- „DC ZERO” mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored „zero” value,
- „MAX/MIN” function,
- over range indication,
- „AUTO-OFF” function after 30 min.
Electric security:
- measurement category: CAT IV 600 V acc. to EN 61010 – 1,
- protection class acc. to EN 60529: IP20,
Other technical data:
- power supply, 9 V battery type 6LR61,
- display: 6600 counts, backlit LCD,
- continuity test: threshold 30 Ω,
- diode test: test current of 0,8 mA , typical open circuit voltage 3,2 V DC, typical,
- low battery indication: BAT displayed,
- over range indication: ‘OL’ displayed,
- temperature sensor: type K thermocouple,
- input impedance: ca.10 MΩ (V DC and V AC),
- AC bandwidth: 50…500 Hz,
- auto power OFF: 30 minutes,
- dimensions: 281 x 108 x 53 mm,
- weight: 570 g (with battery),
- accordance with following standards: EN 61010 – 1, EN 61010 – 2-032.
Rated operational conditions:
- able to open the clamp: Ø 57 mm wire 70 x 18 mm bus bar,
- operating temperature: 0…+50 °C,
- storage temperature: -20…+60 °C,
- operating altitude: max 2000 m.
DC current measurement
| Range |
Resolution |
Accuracy |
| 0,0…659,9 A |
0,1 A |
±(2,0% m.v. + 5 digits) |
| 660…2000 A |
1 A |
±(3,0% m.v. + 5 digits) for 660…1000 A |
| ±(5,0% m.v. + 5 digits) for 1000…2000 A |
AC current measurement (TRUE RMS)
| Range |
Resolution |
Accuracy |
| 0,0…659,9 A |
0,1 A |
±(2,0% m.v. + 10 digits) for 50…60 Hz |
| ±(3,0% m.v. + 10 digits) for 61…400 Hz |
| 660…1500 A |
1 A |
±(2,5% m.v. + 10 digits) for 50…60 Hz
i 660…1000 A |
±(3,5% m.v. + 10 digits) for 61…400 Hz
and 660…1000 A |
±(5,0% m.v. + 10 digits) for 50…400 Hz
and 1000…1500 |
DC voltage measurement
| Range |
Resolution |
Accuracy |
| 0,000…6,599 V |
0,001 V |
±(0,5% m.v. + 2 digits) |
| 6,60…65,99 V |
0,01 V |
| 66,0…659,9 V |
0,1 V |
| 660…1000 V |
1 V |
AC voltage measurement (true RMS)
| Range |
Resolution |
Accuracy |
| 0,000…6,599 V |
0,001 V |
±(1,5% m.v. + 8 digits)
for 50…500 Hz |
| 6,60…65,99 V |
0,01 V |
| 66,0…659,9 V |
0,1 V |
| 660…750 V |
1 |
Resistance measurement
| Range |
Resolution |
Accuracy |
| 0,0…659,9 Ω |
0,1 Ω |
±(1,0% m.v. + 5 digits) |
| 0,660…6,599 kΩ |
0,001 kΩ |
| 6,60…65,99 kΩ |
0,01 kΩ |
| 66,0…659,9 kΩ |
0,1 kΩ |
| 0,660…6,599 MΩ |
0,001 MΩ |
±(2,0% m.v. + 5 digits) |
| 6,60…66,00 MΩ |
0,01 MΩ |
±(3,5% m.v. + 5 digits) |
Capacitance measurement
| Range |
Resolution |
Accuracy |
| 0,0…6,599 nF |
0,001 nF |
±(3,0% m.v. + 30 digits) |
| 6,60…65,99 nF |
0,01 nF |
±(3,0% m.v. + 10 digits) |
| 66,0…559,9 nF |
0,1 nF |
±(3,0% m.v. + 30 digits) |
| 6,600…59,999 µF |
0,001 µF |
±(3,0% m.v. + 10 digits) |
| 66,00…659,99 µF |
0,01 µF |
| 660…659,999 µF |
0,100 µF |
| 0,660…6,600 mF |
0,001 mF |
Frequency measurement
| Range |
Resolution |
Accuracy |
| 10…65,99 Hz |
0,01 Hz |
±(0,1% m.v. + 5 digits) |
| 66,0…659,9 Hz |
0,1 Hz |
| 0,660…6,599 kHz |
0,001 kHz |
| 6,60…65,99 kHz |
0,01 kHz |
| 66,0…659,9 kHz |
0,1 kHz |
| 0,660…1,000 MHz |
0,001 MHz |
Temperature measurement
| Range |
Resolution |
Accuracy |
| -20…0°C |
1°C |
±(2,0% m.v. + 3°C) |
| 0…399°C |
±(1,0% m.v. + 2°C) |
| 400…1000°C |
±(2,0% m.v. + 3°C) |
| -4…31°F |
1°F |
±(2,0% m.v. + 6°F) |
| 32..749°F |
±(1,0% m.v. + 4°F) |
| 750…1832°F |
±(2,0% m.v. + 6°F) |
Duty cycle measurement
| ange |
Resolution |
Accuracy |
| 5…95% |
0,1% |
±(2,0% m.v. + 10 digits) |
„m.v.”- measured value
UT231 Digital Power Clamp Meters
UT 892
Digital Clamp Meter UT202+ UNI-T
UT58A General Digital Multimeters
UTP 04 100MHZ PROBE
CLAMP METER AC DC CM 2056
UT61C Modern Digital Multimeters
YH 907K IRON FOR 939D+
There are no reviews yet.