● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery Display
MS 2109A ACA DCA Digital Clamp Meters
10 in stock
● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery Display
₨10,528 ₨13,162
10 in stock
CompareWeight | 0.3 kg |
---|---|
Dimensions | 22 × 8 × 3 cm |
Specifications | Range | Resolution | Accuracy | |
DC Voltage | 600mV/6V/60V/600V | 0.1mV/0.001V/0.01V/1V | ±(0.7%+2) | |
AC Voltage | 6V/60V | 0.001V/0.01V | ±(0.8%+3) | |
600V | 1V | ±(1.0%+4) | ||
DC Current | 60A/600A | 0.01A/0.1A | ±(3.0%+6) | |
AC Current | 60A/600A | 0.01A/0.1A | ±(2.5%+6) | |
Resistance | 600Ω/6kΩ/60kΩ/600kΩ | 0.1Ω/0.001kΩ/0.01kΩ/0.1kΩ | ±(0.8%+3) | |
6MΩ/60MΩ | 0.001MΩ/0.01MΩ | ±(1.2%+3) | ||
Capacitance | 40nF/400nF/4µF | 0.01nF/0.1nF/0.001µF | ±(4.0%+5) | |
40µF/400µF/4000µF | 0.01µF/0.1µF/1µF | ±(4.0%+5) | ||
Frequency (A) | 100Hz/1kHz | 0.01Hz/0.1Hz | ±(1.5%+5) | |
Frequency (V) | 100Hz/1kHz/10kHz | 0.01Hz/0.1Hz/0.001kHz | ±(1.5%+5) | |
Frequency (Hz/Duty) |
10Hz/100Hz/1kHz/10kHz
|
0.001Hz/0.01Hz/0.1Hz/0.001kHz
|
±(0.5%+3) | |
100kHz/1MHz/10MHz | 0.01kHz/0.1kHz/0.001MHz | ±(0.5%+3) | ||
Duty Cycle | 0.1%~99.9% | 0.1% | ±(3.0%+5) | |
Temperature | -20℃~0℃ | 1℃ | ±(3.0%+4) | |
1℃~400℃ | 1℃ | ±(1.0%+3) | ||
401℃~1000℃ | 1℃ | ±(2.0%) |
Based on 0 reviews
Be the first to review “MS 2109A ACA DCA Digital Clamp Meters”
-
Environment Meters
UT343D Coating Thickness Gauge
UT343D coating thickness gauge can measure coating thickness on ferrous and non-ferrous materials. This device is designed with a unique quick test feature, which allows users to set thickness range and using a 3-color LED and audio alarm to quickly determine if coating being tested falls within the preset range, greatly increasing work efficiency.
UT343 display is auto rotatable. This CE certified device can store up to 500 sets of data for further analysis through the PC analytical software that is included.SKU: n/a -
IR Thermo Meters
UT301C Infrared Thermometers
UT301 series is a professional infrared thermometer that can determine the temperature by testing the infrared energy on the surface. It is used for fast and safe fault detections and maintenance of electric instrument and equipment, engines, motors, and HVAC refrigeration system.
SKU: UN30C1550CIR -
Wire & Cable Testers
UT681L Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a -
Function Generators
UTG2025A Function/Arbitrary Waveform Generator
1. 1μHz full-band resolution
2. 5MHz~30MHz pulse waveform, adjustable rise/fall time3. 14-bit/16-bit vertical resolution4. Two equivalent-performance channels5. Max arbitrary waveform length of 8k/16M points; 48/1616. non-volatile waveforms storageSKU: n/a
There are no reviews yet.