-3%

UT281C True RMS AC 3000A Flexible Clamp Meters

Availability:

10 in stock


1. 2m drop proof, IP54, ETL/Intertek certified 3rdedition CE

2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C

3. Large LCD display for clear reading

4. True RMS

5. Long press INRUSH key for 2s to measure inrush current

6. Datahold, backlight, auto power off

24,400 25,070

10 in stock

Compare

1. 2m drop proof, IP54, ETL/Intertek certified 3rdedition CE

2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C

3. Large LCD display for clear reading

4. True RMS

5. Long press INRUSH key for 2s to measure inrush current

6. Datahold, backlight, auto power off

Category:
Weight 0.3 kg
Dimensions 35 × 19 × 5 cm
Basic Functions Range Basic Accuracy
Model UT281C
Max current measurement (AC) 0.00A ~ 3000A ±(3%+5)
Current measurement (AC) 0.00A ~ 30.00A ±(3%+5)
Current measurement (AC) 0.0A ~ 300.0A ±(3%+5)
Current measurement (AC) 0A ~ 3000A ±(3%+5)
Inrush current measurement 0.00A ~ 3000A For reference
Frequency response 45Hz~500Hz (sine wave)
Jaw size Rogowski flex coil (diameter: 8mm) Bending length: 18 inches (45.7cm); radius: around 3.1 inches (8cm)
True RMS measurement
Measuring digit conversion rate times/s 3
LCD display (TN) interface Single display
Manual range
Auto power off
Buzzer
Low battery indication
Data hold
Manual backlight
Working temperature 0°C ~ 50°C
2m drop proof
Protection grade IP54
Safety certification grade CAT IV 600V
General features
Device color Red and grey
Device weight 236g
Device size 350mm × 190mm × 55mm
Standard individual packing Gift box, blister, English manual

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT281C True RMS AC 3000A Flexible Clamp Meters”

There are no reviews yet.

  • Pride Cutter Plier 6″ With Rubber Grip Handle

    0 out of 5
    (0)

    Pride Cutter Plier 6″ With Rubber Grip Handle

    SKU: n/a
  • SVC 5000VA

    0 out of 5
    (0)

    Input=120V 270
    Output=220
    Under and Over Volt Protection
    Surge Protection
    Over Load and Heat Protection
    Copper Wind with LCD Display

    SKU: n/a
  • UT 278A+ Series Clamp Earth Ground Testers

    0 out of 5
    (0)

    ● Auto range
    ● Data hold
    ● Data recall
    ● LCD backlight
    ● Resistance limit alarm
    ● Low battery indication
    ● Auto calibration

    SKU: n/a
  • MIC-5001, 5000V Insulation Tester

    0 out of 5
    (0)

    Insulation resistance measurement in a compact, light-weight, low-cost design.

    • Measurement to 5 TΩ
    • Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
    • Continuous indication of insulation resistance or leakage current
    • Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
    • Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
    • Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
    • Continuous display of test voltage during the measurement
    • Protection against measuring live objects
    • Two and three-lead measurement method
    • Ramp Test Insulation resistance measurement
    • Measurement of breakdown voltage with increments up to 1 kV / s
    • Measurement of alternating and direct voltages from 0 V to 750 V
    • 990 cells of memory (11880 records) to record results
    • Data transfer to PC via USB cable
    • Built-in rechargeable battery pack
    • Meets the requirements of the EN 61557 standard
    • Charge from optional car lighter (12 V) socket accessory
    SKU: n/a