CMM-10 Multimeter
5 in stock
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
₨11,844 ₨14,478
5 in stock
CompareThe most important features of CMM-10 are:
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
| Weight | 0.2 kg |
|---|---|
| Dimensions | 14 × 7 × 4 cm |
Frequency measurement
| Range | Resolution | Accuracy |
| 5,000 Hz | 0,001 Hz | ±(1,5% m.v. + 5 digits) |
| 50,00 Hz | 0,01 Hz | |
| 500,0 Hz | 0,1 Hz | ±(1,2% m.v. + 3 digits) |
| 5,000 kHz | 0,001 kHz | |
| 50,00 kHz | 0,01 kHz | |
| 500,0 kHz | 0,1 kHz | |
| 5,000 MHz | 0,001 MHz | ±(1,5% m.v. + 4 digits) |
| 10,00 MHz | 0,01 MHz |
- sensitivity: ≥8 V RMS
Duty cycle measurement
| Range | Resolution | Accuracy |
| 0,1…99,9% | 0,1% | ±(1,2% m.v. + 2 digits) |
- sensitivity: ≥8 V RMS,
- pulse width: 100µs – 100 ms,
- frequency width: 5 Hz…150 kHz.
Temperature measurement
| Range | Resolution | Accuracy* |
| -20°C…+760°C | 1°C | ±(3% m.v. + 5°C, 9°F) |
| -4°F…+1400°F | 1°F |
*) probe (K type) accuracy not included
DC voltage measurement
| Range | Resolution | Accuracy |
| 400,0 mV | 0,1 mV | ±(0,5% m.v. + 2 digits) |
| 4,000 V | 0,001 V | ±(1,2% m.v. + 2 digits) |
| 40,00 V | 0,01 V | ±(1,2% m.v. + 2 digits) |
| 400,0 V | 0,1 V | |
| 600 V | 1 V | ±(1,5% m.v. + 2 digits) |
- input impedance: 7,8 MΩ
AC voltage measurement
| Range | Resolution | Accuracy |
| 400,0 mV | 0,1 mV | ±(1,5% m.v. + 70 digits) |
| 4,000 V | 0,001 V | ±(1,2% m.v. + 3 digits) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 3 digits) |
| 400,0 V | 0,1 V | |
| 600 V | 1 V | ±(2,0% m.v. + 4 digits) |
- input impedance: 7,8 MΩ,
- frequency range: 50…400 Hz.
DC current measurement
| Range | Resolution | Accuracy |
| 400,0 μA | 0,1 μA | ±(1,0% m.v. + 3 digits) |
| 4 000 μA | 1 μA | ±(1,5% m.v. + 3 digits) |
| 40,00 mA | 0,01 mA | |
| 400,0 mA | 0,1 mA | |
| 4,000 A | 0,001 A | ±(2,5% m.v. + 5 digits) |
| 10,00 A | 0,01 A |
AC current measurement
| Range | Resolution | Accuracy |
| 400,0 μA | 0,1 μA | ±(1,5% m.v. + 5 digits) |
| 4 000 μA | 1 μA | ±(1,8% m.v. + 5 digits) |
| 40,00 mA | 0,01 mA | |
| 400,0 mA | 0,1 mA | |
| 4,000 A | 0,001 A | ±(3,0% m.v. + 7 digitgs) |
| 10,00 A | 0,01 A |
- frequency range: 50…400 Hz.
Resistance measurement
| Range | Resolution | Accuracy |
| 400,0 Ω | 0,1 Ω | ±(1,2% m.v. + 4 digits) |
| 4,000 kΩ | 0,001 kΩ | ±(1,0% m.v. + 2 digits) |
| 40,00 kΩ | 0,01 kΩ | ±(1,2% m.v. + 2 digits) |
| 400,0 kΩ | 0,1 kΩ | |
| 4,000 MΩ | 0,001 MΩ | |
| 40,00 MΩ | 0,01 MΩ | ±(2,0% m.v. + 3 digits) |
Capacitance measurement
| Range | Resolution | Accuracy |
| 40,00 nF | 0,01 nF | ±(5,0% m.v. + 7 digits) |
| 400,0 nF | 0,1 nF | ±(3,0% m.v. + 5 digits) |
| 4,000 μF | 0,001 μF | |
| 40,00 μF | 0,01 μF | |
| 100,0 μF | 0,1 μF | ±(5,0% m.v. + 5 digits) |
“m.v” = measured value
Electric security:
- type of insulation: double, according to EN 61010 – 1 and IEC 61557
- measurement category: CAT II 600 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP40
Other technical data:
- power supply: 9 V battery type 6LR61
- diode test: I=0,3 mA, U0 = 1,5 V DC
- continuity test: I<0,3 mA, sound signal for R<50 Ω
- over range indication: 0L displayed
- sampling rate: 2 times per second
- input impedance: 7,8 MΩ (V AC/DC)
- display: 5000 counts LCD display with function indication
- dimensions: 138 x 68 x 37 mm
- weight: approx. 210 g
- fuses: mA, µA range: 0,5 A/250 V fast; A range: 10 A/250 V fast
- auto power OFF: 30 min.
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
Rated operational conditions:
- operating temperature: 0…+50°C at <70% rel. humidity
- storage temperature: -20…+60°C at <80% rel. humidity
Brand
SONEL
Based on 0 reviews
Be the first to review “CMM-10 Multimeter”
-
Insulation Tester
UT502A Insulation Resistance Tester
1. 2000 count LCD display, overload indication, backlight
2. AC voltage measurement, auto power off3. Auto discharge4. Continuous measurements mode, red warning light and buzzer function5. Continuous low resistance measurement6. PI and DAR measurement, auto resistivity calculation7. Low resistance returning to zero function to improve accuracySKU: n/a -
Oscilloscopes
UNI-T MSO3152E 150MHz Mixed Signal 2 Channel Digital Oscilloscope
Analog bandwidth 150MHz 250MHz Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels) Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels) Memory depth 70Mpts Waveform capture rate 200,000wfms/s Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display ) Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall] Input impedance (1MΩ±1%) II (20pF±3pF) Input impedance digital (101kΩ±1%) II (9pF±1pF) Vertical scale 1mV/div~20 V/div (1 MΩ) DC gain accuracy <5mV: ±3%, ≥5mV: ±2% Waveform record 100,000 frames Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
CAN, LIN, FlexRayBus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations Auto measurements
Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
-Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→AMeasurement display 5 types Measurement statistics Average, Max, Min, standard deviation and number of measurements Frequency counter 6 bits Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA Standard Accessories
USB interface cable UT-D14 Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06 Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05 16CH Logic analyzer probe UT-15M SKU: n/a -
Clamp Meters
UT207A Digital Clamp Meters (Discontinued)
Features of UT207/A to UT209/A Series 1000A Digital Clamp Meters
Certificates: CE, RoHS
● 1000A AC/DC current measurement, 3 times/s sampling rate
● Auto/manual ranges selectable (UT207A/UT208A/UT209A)
● True RMS (UT207/UT208/UT209/UT209A)
● Analog bar graph (UT209)
● Inrush current (UT207/UT208)
● Zeroing function
● Full icon display (UT207/UT208/UT209)
● MAX/MIN (UT207/UT208/UT209)
● LCD backlight (UT207A/UT208A/UT209A)
● Data hold; Duty cycle (except UT209 )
● Auto power off and low battery indication
● Point contact temperature probe (UT208/UT208A)
● Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a
Related products
-
Multimeters
UT71C Intelligent Digital Multimeters
Product Features
1. Can set the interval forauto data recording
2. MAX/MIN/REL measurement mode
3. Peak hold
4. Analogue bar graph
5. Measure AC and DC in the same stall (AC+DC)
6. 4-20mA loop test
7. 45Hz-100kHz frequency response measurement
8. Double backlight
9. Misplug alarm
10. Auto and manual ranges selectable
11. USB interface available
12. Bluetooth connection with a cellphone for data monitoring
13. Temperature measurement mode,equipped with K-type point contact temperature probe
14. Complies with CE (European Union) and UL (United States) directives
SKU: n/a -
Multimeters
UT107 Handheld Automotive Multi-Purpose Meters
Main Features
1. Dwell angle measurement (DWELL)
2. Tach measurement (RPM)
3. Data hold
4.12V battery test, duty ratio measurement
5. Measurement input port prompt
6. Low battery, auto polarity and over-range indication
7. Complies with CE (European Union) directives
SKU: n/a
There are no reviews yet.